4" Exhaust Outlet for xTool P2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The same mounting and geometry as the OEM 3" outlet. Reuse the same hardware that came with your P2. We used ABS
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 421
- Wydruki
- 0
- Wyświetlenia
- 1727
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The mounting areas has the same geometry as the OEM 3" outlet, but this will fit a 4 inch dryer hose. Reuse the same hardware that came with your P2. Just remove the 4 screws that hole the 3" unit in place. Then install this 4" outlet. There is also a gasket file on Printables that you can cut on your P2. If you don't want to print this one there is a better version available here https://www.copperdog3dprinting.com/home/4-Exhaust-Outlet-for-Xtool-P2-p561395080
Please donate a few bucks to help these files to continue to be shared for free.