CNLINKO LP-12 + Cable Outlet Option Plate for BoxTurtle Skirt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Option Plate integrates the 🥰 CNLINKO LP-12 💪 connector (CAN/24V) and a cable outlet for the TurtleNeck.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 2,098
- Makes
- 2
- Views
- 3,851
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
This is just a tiny little model for the Option Plate Mod of the 🥰 BoxTurtle's rear skirt. It accommodates a CNLINKO LP-12 💪 connector, e.g. to connect both CAN and 24V. Additionally, the design incorporates a dedicated cable outlet for the TurtleNeck sensor (of course with a cable tie option on the inside 🤩), enabling neat cable management.
| 🤔 You like this model? …. Hit the 🧡 Like. This really helps to get the filament for test printing the models I share with you. |
![]()
|
Assembly
![]()
It's designed in a way that you are able to screw in the CNLINKO socket as well as to connect the TurtleNeck cable while the Option Plate is mounted to the skirt. So no worries, you will be able to change things later if needed. |
| 👆 Small Hint: The only tricky part is inserting the upper / lower cable clamp part into the option plate (picture 6). The trick here is to already insert the M3 screw to hold the two parts and keep them aligned to some extent. |
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() |
BOM
- 3 pcs of M3 Voron spec heat-set inserts
- 3 pcs of M3x8 SHS
- (M2x20 countersunk screws and nuts for CNLINKO socket ship with the connector)
CAD Files
… and of course there are some CAD files in the files section in case you want to create your custom option plate and would like to reuse some elements.









