1 / 7
CNLINKO LP-12 + Cable Outlet Option Plate for BoxTurtle Skirt — zdjęcie 1
1 / 7

CNLINKO LP-12 + Cable Outlet Option Plate for BoxTurtle Skirt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Option Plate integrates the 🥰 CNLINKO LP-12 💪 connector (CAN/24V) and a cable outlet for the TurtleNeck.

Ocena
5 / 5
Polubienia
42
Pobrania
2098
Wydruki
2
Wyświetlenia
3851
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v3.0

This is just a tiny little model for the  Option Plate Mod  of the  🥰 BoxTurtle's rear skirt. It accommodates a CNLINKO LP-12 💪 connector, e.g. to connect both CAN and 24V.  Additionally, the design incorporates a dedicated cable outlet for the TurtleNeck sensor (of course with a cable tie option on the inside 🤩), enabling neat cable management.

🤔 You like this model? …. Hit the 🧡 Like. This really helps to get the filament for test printing the models I share with you.


If you are 🤔 wondering about:

*  The rectangular fan mesh outlet 
*  …or the mesh skirt inserts

Both are part of the TurtleFence model

…so 👉 check it out


Assembly


Follow the pictures, and I am sure you will get it done 😎.

It's designed in a way that you are able to screw in the CNLINKO socket as well as to connect the TurtleNeck cable while the Option Plate is mounted to the skirt. So no worries, you will be able to change things later if needed.

👆 Small Hint: The only tricky part is inserting the upper / lower cable clamp part into the option plate (picture 6). The trick here is to already insert the M3 screw to hold the two parts and keep them aligned to some extent.

 

BOM

  • 3 pcs of M3 Voron spec heat-set inserts
  • 3 pcs of M3x8 SHS
  • (M2x20 countersunk screws and nuts for CNLINKO socket ship with the connector)


CAD Files

… and of course there are some CAD files in the files section in case you want to create your custom option plate and would like to reuse some elements.

Tagi