Filament Dry Box with Dual Spool Holder and Tube Outlet for IKEA365+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a drying box for filament with a spool holder for two spools and matching outlets in an airtight IKEA365+ box.
- Rating
- 5 / 5
- Likes
- 277
- Downloads
- 1,178
- Makes
- 10
- Views
- 13,727
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Model updated! All parts improved!
This is a drying box for filament with a spool holder for two spools and matching outlets in an airtight IKEA365+ food container. The filament outlets is optimized for the PC4-M6 fittings and allows the PTFE tube to be pushed all the way into the housing. This results in almost no friction loss inside the outlets compared to many other designs.
The width of the roller itself can be adjusted as required.
Print instructions
Parts
- 1x IKEA 365+ Food container with lid, rectangular/plastic 358 oz/10.6l
(PN: 792.767.60 = 103.930.64 Box + 303.930.63 Lid) US Store/DE Store - 2x Pneumatic Fitting PC4-M6
- 8x Ball bearings 608ZZ (8x22x7mm)
- 1m PTFE Tube with ID 2.5mm and OD 4mm
Optional Parts
Assembly
- Print Holder
- 1x Holder - Middle
- 2x Holder - Side
- Print Outlet
- 2x Nuts
- 2x Bolts (maybe with support in the middle)
- (Optional: 10mm Wrench)
- Cut each aluminum rod to approx. 160mm
- Drill two 16mm holes in the IKEA box (example position in the pictures)
- Assemble parts
Links
The links to AliExpress are advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the offers from which I have also bought and was satisfied with the supplier and the goods. The products can of course be bought anywhere.