1 / 13
Filament Dry Box with Dual Spool Holder and Tube Outlet for IKEA365+ — zdjęcie 1
1 / 13

Filament Dry Box with Dual Spool Holder and Tube Outlet for IKEA365+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a drying box for filament with a spool holder for two spools and matching outlets in an airtight IKEA365+ box.

Ocena
5 / 5
Polubienia
277
Pobrania
1178
Wydruki
10
Wyświetlenia
13 727
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Model updated! All parts improved!

This is a drying box for filament with a spool holder for two spools and matching outlets in an airtight IKEA365+ food container. The filament outlets is optimized for the PC4-M6 fittings and allows the PTFE tube to be pushed all the way into the housing. This results in almost no friction loss inside the outlets compared to many other designs.

The width of the roller itself can be adjusted as required.

Print instructions

Parts

Optional Parts

Assembly

  • Print Holder
    • 1x Holder - Middle
    • 2x Holder - Side
  • Print Outlet
    • 2x Nuts
    • 2x Bolts (maybe with support in the middle)
    • (Optional: 10mm Wrench)
  • Cut each aluminum rod to approx. 160mm
  • Drill two 16mm holes in the IKEA box (example position in the pictures)
  • Assemble parts

Links
The links to AliExpress are advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the offers from which I have also bought and was satisfied with the supplier and the goods. The products can of course be bought anywhere.

Tagi