Counting matching models…
Since the only raptor-like charging handle that had a working mechanism i could find were paid models i decided to model this up . It might not be compatible with your gearbox model , mine has a 3 mm notch on the top of it . I might make…
Charging socket Bosch Smart Code: 998018800
Frameworks charging cables keep breaking due to strain when it wraps around the back of the device. This little strain relief should help. The inner diameter is for 4.5mm cables. This should also work on non Framework cables with the…
It's a sign! Based loosely on the Australian road sign standards. Model dimensions are 300mm x 450mm, scale down to your print bed while setting the desired thickness. Multicolour Print from Multicolour files White, green and blue parts…
This is a remix of my deku tree design
This Google-ey charging stand is for the Pixel Watch 2 and 3. Featuring: Suitable for Pixel Watch 2 and Pixel Watch 3, both 41mm and 45mm sizes Contoured so that the watches snap into place and start charging No need to remove band…
3D-printable Smartphone Chargingstation inspired by the design of the Enercharge ECC320. The most parts are printed separately, but the Display should be printed on a multicolor printer. Maybe the parts can be printed separately as well…
The STL file is designed for Galaxy S20+ for other phones and chargers you can customize the attached cadquery code.
Phone was constantly sliding off the wireless charging spot and stopped charging, so i made a bracket! Compatible with non-Max iPhones including case. Pictured is an iPhone 17 with Apple Silicone Case. For Ford Focus fourth generation…
Charging station for AA, AAA, C, D cells. Modular inserts for various quantities of these cells and an EBL C6201 AA/AAA charger. Don't forget to rotate the part flat! Great as-is, or works well with some cheap felt pads added to each…
Charging Stand for the Google Pixel 9 Pro Fold
Do you sleep in the same room as your wirelessly charging mouse? Use this shroud to hide its status lights without worrying about your computer’s sleep state or RGB software. Includes a few vents at the top and a hole for the charging…
Wireless charging stand of iphone 13 (Anker). Stand is suitable for 6 mm diameter anker wireless charge
Raises modern flip phones up to ensure good contact between charging sensors on the phone and charging stand Tested with Motorola Razr+ 2024 Printed 0.4mm nozzle, 5% in-fill, without supports in PLA
I made it shaped as curved pan just for fun. You will also need 90° adaptor, like that: here are the links for Amazon, Aliexpress and e-bay： https://www.amazon.sa/-/en/proAMEDEN-Lightning-Adapter-Support-Charging/dp/B0BJ51F2NW…
Purpose Introducing a unique toilet-shaped charging stand with a lid, designed for Apple Watch and mobile phones. This model features two versions. Version 1 is intended for Apple Watch only, while Version 2 is combined and allows…
This compact charging dock keeps your devices organized and charged while still having a sleek, modern design. It has 4 slots for charging multiple devices at the same time, including smartphones, tablets, and e-readers. Each slot has…
My watch was always laying on the floor, desk or hanging from the computer while charging, so I made this stand. I wanted it functional : The forerunner 955 stands on it while charging but even if the USB is stored wrapped around. Other…
You can get very inexpensive wireless charging boards from Ali Express that work just fine with apple products. It might not be as fast as the expensive Apple one, but they work exactly the same way. The disk slides into the charging…
Wireless Charger Stand. Galaxy PETG, 20% infill. Enjoy.
Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…
A charging station for a Samsung A34 (another cable from amazon), a Garmin Vivoactive 5 (Orginal cable) and the Galaxy Buds 2 (Orginal cable). Since I don't have a bedside lamp, I added an LED strip to the model. Since this configuration…
Envious of Scott Yu-Jan's fantastic iPhone charging station, I designed my own charging dock, based on his idea, for the Xiaomi Mi 11 Ultra from scratch. Even though this phone might not be widely used anymore, I still wanted to share my…
Meet The Stingray —a charging dock that combines form and function like a pro. Bonus: Apple Watch users, don’t feel left out! Find the STEP file so you can customize your way into the party . Tired of losing your charger under piles of…
INSTRUCTIONS!!! For the assembly you will need eight M2.5 6mm countersunk screws (or just try different lenght if it will be enough), four M2.5 11mm long (standoff) nut and TP4056 usb C charging board. First step is to print all the…
This is another Pixel Watch holder that allows you to charge your watch upright, with the bezel facing left or right. I wanted to design something that was sturdier than the cliffhanger, but still had a bit of flow to it. Update 2/9/25: I…
Requires soldering a USB-C PD (I used this one at 5V) directly to the battery terminals. The base part will provide additional support. No glue is required. Disassembly starts with crude destruction of the proprietary charging port. Then,…
Should have a snug fit on your charging adapter. Holes 5 mm for countersunk head screw. Tight the screws by hand. A narrow gap between this part and the wall is provided to press the charging adapter securely against the wall. My Print…
this is a charging station for the infinitive earbuds case that attaches to the honeycomb wall if you dont know what the honeycomb wall is just search 3d printed honeycomb wall on any browser and you will find out.
I made a simple charging stand for my Epix 2 PRO 51. Using the original charging cable. It should also fit the Fenix 6/7/8 (please let me know). Added version with thread lock (nut print 0,12 mm layer height). 4mm hex.
No supports required. No assembly. Just Print slide in the charger and the use. Hope you like my remix.
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
This is a simple wall mount for holding phones and/or an Apple watch for charging. For the Apple watch it has a bed that fits the charger perfectly. One phone can stand upright, another can either stand upright or lay on the side (cable…
A parametric model to keep your phone safe on round wireless Qi charging pods. This is done for 94 mm diameter charger and a Google Pixel 8 phone. I have my phone in a cover, but should fit without just fine. To adapt use freecad and…
this was done in tinkerCad and my skill level is not great, if anyone wants the TinkerCad link, let me know and I will make it available.
------------> ENGLISH <------------ You can't glue any of the plastics of the Twizy. That's the way it is! Take it for granted. That's why ALL my spare parts for the Twizy are screwed. This is a remix. Some minor improvements: Added hole…
Seeed Studio Sensecap T1000-E charging cradle/puck with magnet attachment
After a long search for a portable charging box, here comes the design. Snap fit and perfect close, slot wider to fit most common usbC cables. Single print with PLA. Designed in Onshape, let me know if you need a link to personalize the…
IONIC 5 charging port lights cover is a simple attachment that hides the glowing charging lights on the car if you want it to not draw unwanted attention or light up an otherwise dark environment. You simply hook the attachment over the…
English Adjustable 3D-Printed Stand for iPad Pro M4 & M5 11” (2024 & 25) – Dual-Color Modern Design with Integrated Apple Pencil Charging Key Benefits: • Multi-purpose versatility: Three optimized angles (85°, 50°, 25°) perfectly suited…
A minimalistic 3D-printed charging dock designed for Apple AirPods with a Lightning connector . Features Compatible with the official Apple Lightning cable Clean, minimal design Clever cable integration to secure the connector in place…
This is a Puffco Peak Pro desk mount that has room for a wireless charger sure many will fit but diameter is set for 87.5 mm. The wireless charge i used is a onn WIABLK00008472. No Clue if its made anymore but should be simple enough to…
CMF Watch Pro 2 Wall/Desk Mount – Clean, Functional, and Future-Ready Elevate the way you charge and display your CMF Watch Pro 2 with this sleek, minimalist wall/desk mount designed for seamless integration and effortless style.…
This remix makes your normal aap01 charging handle extended to the side about 4 inches for personal customization. (NEEDS SUPPORTS) printed at .12 layer height and 100% infill. Please leave a make or a comment, thanks.
2CH USB Charging Port Module is: https://www.ebay.com.au/itm/176571343175 https://www.aliexpress.com/item/1005007038056734.html https://www.amazon.com.au/Dlb0109-Converter-Charging-Libertine-high-Performance/dp/B08SKDKVQB Replace both…
This charging dock mounts on the wall via 2 recessed screw holes with #6 screw. Prints in 2 pieces. Top part is the holder with opening for USB. Bottom part is the cable guide. I use 3M tissue tape to secure the 2 pieces together. I…
A wireless charging dock for the Unfolded Circle Remote 3 that can accept MagSafe (56mm) or third party (58mm) wireless chargers. The base and cover are universal; just pick which cradle charger size you need and print accordingly. I have…
Charging Stand for the Galaxy Z Fold 7 and probably the fold 8. Don't have a 3d Printer / Want one ready made? I sell fully printed and assembled ones on my etsy! [Purchase fully assembled stands] Where to purchase the Magsafe Charger...…
I don't know if someone will be appreciated, but I had a problem finding the right position for functional charging after a year of using my hours. I had no reason to update the lessons yet, so I only tested on my specific clock models. I…
I found the charging handle on the IWI TS12 to be VERY uncomfortable to use, so I designed this. Print in TPU, optionally with the fuzzy skin enabled and a low infill (I used 10% + fuzzy skin). .scad file is included so that it can be…
This is a custom charging stand for the Mobvoi TicWatch Pro 5 , designed to fit a magnetic cable from AliExpress (example link ). The design is based on the idea of the original stand , but modified to fit this slightly different cable.…
Core2 Corebodytemp sensor charging stand, I kept trying the charger the wrong way around the first time and having the cable pull the sensor off my desk so I made a changing stand that use the original magnetic charger, just slide the…
This is a replacement for the original plug that is so soft it easily breaks after a while. Best printed in flexible material. Category: Replacement Parts
DIY Mouse charging dock which works with any logitech mouse that is Powerplay comatible as it uses the two charging connectors on the bottom. Part list: 3D Printed parts: 1x Base 1x Coin 1x Body Electronics: 1x TP4056 usb-c board 2x ~5cm…
I use a Magicband+ Puck Watch Band Holder . When I take the puck out of the holder to charge it, I need a way to secure it to the charger. This band does the job! You need to use a flexible filament. I used Overture TPU, and I'm really…
REGISTERED DESIGN No. 6495338 Description This custom 3D printed charging dock is designed specifically for the Positive Grid Spark LINK wireless guitar system. It provides a neat, secure, and reliable way to keep your transmitter and…
its a charging dock for the Samsung watch charger and an apple magsafe charger
REGISTERED DESIGN No. 6495340 Description This custom 3D printed charging dock is designed specifically for the Positive Grid NEO Headphones Transmitter. It provides a neat, secure, and reliable way to keep your transmitter and receiver…
REGISTERED DESIGN No. 6495339 Description This custom 3D printed charging dock is designed specifically for the Positive Grid Spark LINK wireless guitar system & Neo headphone transmitter. It provides a neat, secure, and reliable way to…
An insert created for the Ember v1 charging plate. This provides the ability for you to place the mug onto the charging plate without it constantly charging. If you need to charge it, just remove the insert and place your mug onto the…
I don't use the built in hanger for my charge cable on the level 2 charger because it sticks out from the wall and is too easy to bump into and break the charger. So I made a light cover (see other models) and a dust boot to protect the…
Charging holder for mobile phones, attachable to a table. Space for mobile phones with a projection of 84x19mm. The height of the space for mobile phones is 87mm. In the middle of the space there is a groove for the charging cable with a…
I recreated existing stand and added slot for Huawei watch charging station 2. generation.
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
The Razr 60 Ultra does not allign with the wireless charging pad in the Tesla. This model raises the Razr just enough. Print with PETG, ABS or any other filament that can handle the heat in a car parked in the sun.
While not a true remix (this one was designed from the STEP file of the V5 battery provided by vex), this model was inspired by seeing the charging sleeve here ( https://www.thingiverse.com/thing:3608551 ). The docks are designed to be…
3D-printable Smartphone Chargingstation inspired by the design of the Enercharge ECC320. The most parts are printed separately, but the Display should be printed on a multicolor printer. Maybe the parts can be printed separately as well…
I had a Fitbit Inspire 3 Charging Stand by @ OllieMakes that I really liked so I modified his design (based on a design by @PRINTSY to fit the larger width and circular magnetic charger of the YHE S7 BP Doctor Fit Smartwatch. In order to…
This is a charging stand for the Mobvoi TicWatch e3. I recommend printing it on the backside. You might be able to get by without supports. I made the slot for the charger a little oversized so an aftermarket charger should be able to fit.
hi point carbine charging handle is larger for a better grip
A simple charging stand for the Plaud Note Pro. No supports needed. The charger can be inserted in the back and automatically charges the device when it's inserted.
It's a sign! Based loosely on the Australian road sign standards. Model dimensions are 300mm x 450mm, scale down to your print bed while setting the desired thickness. Multicolour Print from Multicolour files White, green and blue parts…
An alternative non-charging wall mount for Yealink AX83H wireless VOIP phone. It comes with a wall-mountable charger, but it's not great to have a Li-ion battery on a charge 24/7, so I installed this next to the wall charger. Screws into…
Charging stand for the Xiaomi S1 Active, specifically designed to accommodate closed-loop straps (as shown in the photos). The hole under the charging pad allows you to pop the charger out easily. Print it on its side to avoid supports. I…
Phone was constantly sliding off the wireless charging spot and stopped charging, so i made a bracket! Compatible with non-Max iPhones including case. Pictured is an iPhone 17 with Apple Silicone Case. For Ford Focus fourth generation…
Created this all-in-one charging station with a rubberized fast car charger. It will accommodate most phones. I have added a small stand at the base to help the non Iphone Max phones. It will accept the side plug chargers on ebay and…
Charging station for AA, AAA, C, D cells. Modular inserts for various quantities of these cells and an EBL C6201 AA/AAA charger. Don't forget to rotate the part flat! Great as-is, or works well with some cheap felt pads added to each…
Case for cheap battery charging board for betafpv 1s battery bt 2,0. I use pla and standart options in slicer
This charging stand for the OXVA Xlim Pro includes a cable pathway at the back and a recess beneath the device stand for a USB-C charging cable. It also includes spaces for 2 pods, a 10ml eliquid bottle and a 100ml ShortFill bottle. The…
This build provides a dock to hold a Galaxy 7 watch (40 mm) while it charges. The two 3MF files whose names end with the word "Slicer" were saved by the Prusa slicer after adding a small mesh block with a more dense infill to reinforce…
This is a stand under the desk or anywhere else for the S22 Ultra that allows wireless charging. You need a 15W round wireless charger, and you can secure it with double-sided tape or screws. It is recommended to only put supports on the…
PLEASE NOTE: I am a absolute beginner at 3D modeling and this model will probably have some design flaws or things I overlooked. This is a remix of @BuildComics_95092 Galaxy buds 2 dock. The charging puck is designed specifically for the…
I wanted to be able to mount my T1000-E to my Multiboard, so here we are. Supports are necessary.
A basic Charging dock that I made a while ago, based around a RAVpower charger, similar to this: https://www.ravpower.com/products/ravpower-60w-12a-6-port-desktop-charger
The CMF Watch 3 Pro really impressed me with its price-to-quality ratio — to the point where the perceived quality often feels higher than its price. This model is a mix of two existing designs: a charging dock for CMF Watch 3 Pro from…
I always liked the design of charging station for Quest 2/3 like this . As there is no option for quest 1, I designed one myself with convinient USB C magnetic adapter. This design provides charging stand for quest 1 with hand…
The Skoda Enyaq chargingcover locking pin mechanism is prone to rust, at least known for the Models from 2021 to 2027. To help prevent this to happen for my Skoda, I've created this little Cover, that slips onto locking pin to protect it…
In search for a Charging and Display stand for my recently resurrected Pebble Time Smartwatch (see https://repebble.com/watch ) i have not found one model that is compatible with the IKEA Skadis Pegboard. So i decided to create my own.…
Rain cover for Phoenix charging plugs https://www.phoenixcontact.com/de-de/produkte/ac-ladekabel-ev-t2g3p-1ac20a-40m25ehbk01-1627731
I was having problems with my computer charging cable coming loose. I made this for my HP Envy. (HP ENVY x360 - 15m-dr1012dx) I also made a mirrored one for my dad's ( HP 15- fc0099nr) I will know in a couple of days if that one works for…
A desk cradle for the USB charging base of a Samsung Galaxy Watch 6 although I have since also fitted bought a Watch 5 Pro with the same size puck. The shelf for the watch can be rotated +/- 30 degrees before you fit the cable, which then…
These are the magnetic charging cables that I used for this. In testing, printing at .3mm layer height produced a good friction fit. When I printed at my normal .2mm layer height, the cables didn't stay put, but that was fixed with a bit…
Watch stand for Garmin D2 Air Watch. You can lead charging cable through the groove in the base plate. For easier printing, the stand is made of 3 parts. You will need 2x M3 hexagonal nuts and 2x M3x10 inbus screw. Should anyone want to…
This charging dock is designed specifically for the Huawei Watch GT 6 Pro , giving your watch a clean, stable, and elegant place to recharge. The model comes in two versions , so you can choose the cable routing style that fits your…
This is an Ikea Skadis stand designed for a Withings Scanwatch 2 and its charger. Usage is pretty simple- pop the charger into the bottom recess and hook onto your Skadis. Print settings are flexible but unfortunately you do need to…
This is a 3D-printable charging dock designed for simultaneous charging of two lil SOLID 2.0 / 3.0 devices . The dock provides a clean desktop solution with integrated USB Type-C connectors, eliminating loose cables and keeping your…
