Charging butler / iPhone + Watch + AirPods Pro desk charger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple Standby Mode support in iOS 17.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 52
- Makes
- 0
- Views
- 709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Desk variant of my “Charging butler / iPhone + Watch + AirPods Pro wall mount charger”.
Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to have 1 visible cable only for a cleaner look...
The iPhone can be used in regular position or rotated 90° to be used in the new “Standby mode” of iOS 17.
The holder is large enough for an iPhone 14/15 Pro MAX + Apple Watch + Apple AirPods and all devices can be charged at once with good speed due to the good power supply. All cables are hidden inside the case.
Parts needed:
- 65W power supply from UGREEN (Amazon GER) or UGREEN (US) with 2 USB-A (Apple Watch + AirPods) and 2-USB (Apple iPhone and 1 for future use…). This power supply will fit very good into the case but others with similar specs (70mm x 70mm x 30mm) might fit too.
- 4x M3x8mm screws to mount the holder to the lid which is attached to the wall
- 1x Apple MagSafe
- 1x Apple Watch charging cable
- 1x Apple Lightning cable for the AirPods
Mounting the parts:
- Route the Lightning cable from the inside to the right arm and press it in place.
- Press the iPhone MagSafe into the Holder part and route the cable to the inside.
- Press the Apple Watch charger into the Holder part and route the cable to the inside.
- Connect the USB cables into the charger and route the cables inside the case to save space.
- Connect the power cable into the charger through the hole in the Lid part.
- Press the Holder part onto the Lid part and secure it in place with the 4x M3 screws.
- Attach the power cable to your mains source.
- Enjoy =)
Printing instructions:
- 0.3 draft profile
- Supports from the print bed for the holder part
- Supports blocker added to avoid not needed supports for the butlers suit
- Textured sheet used
- Color change used at 1.2mm and 2.4mm to get the butler look =)
Happy printing =)