1 / 6
Charging butler / iPhone + Watch + AirPods Pro desk charger — zdjęcie 1
1 / 6

Charging butler / iPhone + Watch + AirPods Pro desk charger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple Standby Mode support in iOS 17.

Ocena
0 / 5
Polubienia
8
Pobrania
52
Wydruki
0
Wyświetlenia
709
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Desk variant of my “Charging butler / iPhone + Watch + AirPods Pro wall mount charger”.

 

Charging butler /  Apple iPhone, Watch, AirPods Pro desk charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to have 1 visible cable only for a cleaner look... 

The iPhone can be used in regular position or rotated 90° to be used in the new “Standby mode” of iOS 17.


The holder is large enough for an iPhone 14/15 Pro MAX + Apple Watch + Apple AirPods and all devices can be charged at once with good speed due to the good power supply. All cables are hidden inside the case.

 

Parts needed:

 

Mounting the parts:

  1. Route the Lightning cable from the inside to the right arm and press it in place.
  2. Press the iPhone MagSafe into the Holder part and route the cable to the inside.
  3. Press the Apple Watch charger into the Holder part and route the cable to the inside.
  4. Connect the USB cables into the charger and route the cables inside the case to save space.
  5. Connect the power cable into the charger through the hole in the Lid part.
  6. Press the Holder part onto the Lid part and secure it in place with the 4x M3 screws.
  7. Attach the power cable to your mains source.
  8. Enjoy =)

 

Printing instructions:

  • 0.3 draft profile
  • Supports from the print bed for the holder part
  • Supports blocker added to avoid not needed supports for the butlers suit
  • Textured sheet used
  • Color change used at 1.2mm and 2.4mm to get the butler look =)

 

Happy printing =)

Tagi