MagSafe iPhone and Apple Watch charging stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back.…
- Rating
- 4.909 / 5
- Likes
- 307
- Downloads
- 3,052
- Makes
- 23
- Views
- 15,404
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back. I also added an addition file with and extension to support a phone if it isn't magnetic (tested with iPhone 11 and it worked great).
Original link to jburd's design is here: https://www.thingiverse.com/thing:4811627
Rotate the print so it's sitting on it's side. I found it prints with less supports material if the side for the phone is touching the build plate (as seen in the picture).
Printed with 25% infill and 2 wall for most of the print. For the section between the phone and watch I printed at 50% infill and 4 walls for better strength and less chance of cracking the print when removing supports (I found out the hard way).
Sliced in Cura with tree supports.
Print Settings
Printer:
Prusa Mini+
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
25
Filament:
Fulament PLA
Black
Category: Mobile Phone