MagSafe iPhone and Apple Watch charging stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back.…
- Ocena
- 4,909 / 5
- Polubienia
- 307
- Pobrania
- 3052
- Wydruki
- 23
- Wyświetlenia
- 15 404
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back. I also added an addition file with and extension to support a phone if it isn't magnetic (tested with iPhone 11 and it worked great).
Original link to jburd's design is here: https://www.thingiverse.com/thing:4811627
Rotate the print so it's sitting on it's side. I found it prints with less supports material if the side for the phone is touching the build plate (as seen in the picture).
Printed with 25% infill and 2 wall for most of the print. For the section between the phone and watch I printed at 50% infill and 4 walls for better strength and less chance of cracking the print when removing supports (I found out the hard way).
Sliced in Cura with tree supports.
Print Settings
Printer:
Prusa Mini+
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
25
Filament:
Fulament PLA
Black
Category: Mobile Phone