P
Printables
4Legs4Pets Pet Cot Plugs
Recommend you use PETG if the cot will be exposed to sunlight. Also recommend you print 1 plug and test fitment prior to printing the remainder. They should be a press fit and not easily fall out.
Search results: plug
Counting matching models…
P
Printables
Handlebar Plugs Dual Color/Material
Give some extra color to your bike with these dual color handlebar plugs. These plugs have total diameter of 32mm so they match better with lock on or really thick grips. Thanks to Single - Extruder Dual - Color technique, you don't need…
P
Printables
Trailer Plug Holder
This 3D-printed mounting bracket is designed to securely hold a trailer plug using a convenient snap-click mechanism. It is mounted directly onto the trailer, ensuring that the plug stays in place, protected from movement during travel.…
P
Printables
Trailer plug cover 13 pins.
Protective cover for trailer 13 pins plug. Recomended print: Layers: 0.2 Perimeters: 4 Infill: 5% gyroid Material: recomended ABS, ASA, maybe PetG.
P
Printables
IKEA METOD plug
I was a few plugs short while building ou kitchen cabinets so I made this model. Printed with PLA with 0.1 mm layer height. No support or brim needed, print it in the original orientation.
P
Printables
Flow Hive bottom plug
I made this to replace lost plugs from my Flow Hive frames. Printed in PETG at 0.15mm it works fine. The ones I made have lasted a couple of years and look like they will last many more.
P
Printables
Wrangler JK Tire carrier delete plug
These are 2007-2018 Wrangler JK tire carrier delete plugs. I designed it to fill the holes and to be really snug. Just print it upside down. I printed it with standard settings with PLA, but i think PETG will be better…
P
Printables
Wrangler JK License plate delete plug
2007-2018 Wrangler JK license plate delete plug. I have made 3 types: Plaint with no text, Rubicon and Recon versions. Let me know if you need something else. The font is not the exact jeep wrangler font, but its very very close. You can…
P
Printables
Kong Plug (Dog Treat Toy End Stop)
This was requested by my Aunt who loves making frozen treats for her dogs. Very quick print. Plug the small hole of the dog toy… Fill with chicken broth or peanut butter or another dog safe filling… freeze…. remove plug.. give to dog to…
P
Printables
Ender 3 NG Beta V1.1 - PSU Plug Mount
screw existing power plug through the electronics panel and use the mount as intended for the screws to fasten to
P
Printables
gutter plug 42mm
I have a water collector installed on the gutter with diameter of 15cm during the summer, witch I remove for the winter. This is the cover for the hole in the eaves. Diameter of the hole is 42mm
P
Printables
Spacer for Multi Plug Outlet
Some of the multi plug outlets do not have a recessed back and leave an unsightly gap when installed and this spacer is a simple solution to fill that gap. This spacer was made to work with a OneBeat multi plug outlet that I picked up on…
P
Printables
Bosch / Steinel Glue pen gun holder for Skadis system NA plug remix
I simply modified the holes for the north american wall plug to fit in, and i also made more space inside the gun space.
P
Printables
Hole Plug (parametric)
EDIT: Download and use the All Imperial and Metric Sizes.3MF file, which includes common sizes: Imperial: 1/4", 5/16", 3/8" (x2), 1/2" (x2), 5/8" (x2), 3/4" (x2) Metric: 6mm to 20mm (in 1mm increments) Or make a custom size: Download the…
P
Printables
Sink plug holder for kitchen faucet
After my wife asked me to add a sink plug holder to the cap of our soap dispenser in the bathroom , she asked for a holder for the wide sink plug/sieve for our kitchen sink. I do not expect that someone will find this model who has the…
P
Printables
Polymaker Dryer Box Plug
A plug to replace the existing ones. This one has no hole for a PTFE tube nor the filament. It works well in TPU.
P
Printables
Remix - Prusa Enclosure PSU Holder Wire Pass Through Plug
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional Add a zip tie to both sides, after passing the PSU wiring through the hole:…
P
Printables
Ultimate Find My Valentine AirTag Plug!
Tired of losing your special someone or maybe just your special something ? This Valentine's Day, keep love (or lust) right where it belongs with this AirTag-friendly butt plug. 💖 Never lose your lover (or your dignity... maybe) 💖 Works…
P
Printables
Replacement Plug for Desk Cable Feed-Through 77mm
My desk has a hole with a diameter of 77mm, which I don't need. This plug closes the hole. Printed in PETG. No support and no brim needed.
P
Printables
Earplugs Case with separated left and right compartments
A friend asked me if I could design an earplugs case for her custom made concert/party ear protection earplugs. She has difficulty recognizing left from right of her custom earplugs in a dark club or venue, so something with separate…
P
Printables
Microscope Stand for Plugable USB microscope
Overview Sturdy, rigid design made specifically for 3d printing. Prints in 4 parts and everything snap fits together tightly and securely. No overhangs or special print settings needed. Great for viewing specimen slides. This design is…
P
Printables
QMX Transceiver dual 3.5mm stereo audio plug adaptor
I made this to adapt an old speaker/mic to my QMX. The spacing between the 3.5mm audio plugs is 12mm. It will only plug in one way because the other way the power cable will block it. The 3.5mm plugs I used have 7.9mm ends which depending…
P
Printables
Commando Plug Cover
Cover for a Commando 3 pin external appliance plug. Printed in TPU it gives a snug but not tight fit.
P
Printables
Radio Plug-in Coil Form + Tri-Tet Transmitter Parts
This is roughly designed after a Hammarlund style vintage form, with some changes. I designed it to accept a common octal plug in tube base: https://www.tubesandmore.com/products/plug-8-pin-octal-tube-base-black-plastic OD is 1.625",…
P
Printables
Aircraft Spark Plug Tray
Six-cylinder spark plug tray for aircraft spark plugs. Has “REMOVE TOP” and “INSTALL TOP” debossed text to aid in plug rotation order, as well as cylinder numbers. As you remove spark plugs place them in their respective numbered holes…
P
Printables
Window plug for drainage
It is better to print vertically with tree supports so that the latches are positioned parallel to the layers and do not break. window plug drainage windowframe
P
Printables
Playstation 1/2 controller plug
I am currently testing this for making custom plugs for ps1/ps2 controllers for use with https://github.com/Micha213/Blu , I will add further instructions once I've found fitting pins. Update: It looks like 1.3mm brass rods are a good…
P
Printables
Plug in bicycle chain protector
Some weeks ago our bike was stolen. It was secured to the wall using one of those plug in chains that go into your frame lock. If you look closely you will see that about 1 cm to 1 inch of metal are exposed where the plug goes in (picture…
P
Printables
Dynaplug Racer Pro Mounts
A simple mount for Dynaplug Racer Pro. This is designed to be relatively low profile. EDIT: 4/30/2026 -- Added an inline mount version. This model has 20mm of built-in adjustment. It is based on a 40mm tube diameter, with the Dynaplug…
P
Printables
Locknuts, Blanking Plugs, Bushing and Washers
A collection of blanking plugs, bushing, locknuts and washers. Blanking Plugs: for blocking off holes in metal trunking, panels or equipment racks. Plain circular with screwdriver slots (BPP) or hexagonal (BPH). Bushing: for routing a…
P
Printables
41mm hole filler plug 1 5/8" - fits circular humidity temperature sensor
We installed one of these and put it in the wrong spot! To fix our mistake, we needed to fill the hole. Example printed with PETG
P
Printables
Zombie Captain America Ear Plug/Gauge Tunnel
Tunnel for gauged ears 40 mm but can be resized in slicer to desired MM
P
Printables
Decathlon Quechua MH500 Chair Frame Plug
This part of our Quechua folding camping chair went missing. This breaks the chair, so I decided to make a 3D-printable design for it. And it works! Print settings: PETG 0.10mm detail Supports everywhere Infill 15%
P
Printables
Knott Axle Plug
This is the protective axle plug/dust cap or whatever it's called. This is for a KNOTT axle on a Thule CE100035R, I'm sure it's the same on different Knott axles. I printed this with TPU at 100% infill.
P
Printables
Prusa Enclosure Plug
Can be printed out of PLA, but a more flexible material is recommended for easier insertion.
P
Printables
OneUp EDC Tubeless Plug Kit
Cut a standard tubeless plug tool to ~4.5 cm from the bacon-holder end Drill to the correct diameter if needed Epoxy the metal piece into the 3D-printed plastic part If it rattles in the threads, wrap the threads with Teflon tape Fits the…
P
Printables
Torqueflight 904 Drive Plug
This is designed to plug the transmission side of a Torqueflight 904/998/999 torque converter. You can use this if you need to store or ship a torque converter to keep dust out, or prevent leaking. I designed this for my AMC 360 run…
P
Printables
Plug Pulling Device for Black&Decker Dustbuster or Similar Flat Plug Items
Some plugs, like those used with DustBusters, can be difficult to handle because they lie flat against the device when inserted, leaving little space to grip them. This design solves that problem by using two rings. The smaller ring holds…
P
Printables
Bike Water Bottle Boss Plug/Cover
Fill your unused water bottle bosses with lightweight/color match plugs rather than screws! NOTE: This should not be used for actually mounting anything, just plugging unused mounts.
P
Printables
Nosfet aero power plug
Power plug for nosfet aero electric unicycle based on original which snapped after first use. Printed with TPU, fits really tight. Printed on P1S Printed with TPU (Generic TPU profile provided by bambu lab). 0.6mm nozzle 0.3 mm layer 2…
P
Printables
Super Soco VMoto TC Max Charging Port Plug
This is a replacement for the original plug that is so soft it easily breaks after a while. Best printed in flexible material. Category: Replacement Parts
P
Printables
Glade Plugins Organizer Tray
This is a storage tray for Glade Plugins scented oil diffuser refills. My wife had a bunch laying sideways and I wanted to help her store them upright in case they leak. I made versions with and without the chamfered corners, and without…
P
Printables
E-bike charger dust plug
Friend's ebike charge port cover broke off the thin rubber tether (common issue) and he was worried the whole thing would fall off without the tether. This is a smaller cap that slides into the port to keep dust out. Printed in TPU for…
P
Printables
Reservoir cap for Craftsman pressure washer, 1" hole plug
My Craftsman electric pressure washer was missing a cap or plug for the detergent reservoir, so I made one. It has a groove for an o-ring (size G20, 19.4mm ID, 3mm thick). The OD of the plug itself is 1.125". Also works great as a generic…
P
Printables
Earplug BOX
Improved original version. Best printed with PETG.Improved original version. Best printed with PETG.
P
Printables
Sink Plug Pusher (FreeCAD)
A few days ago, my wife was terribly angry because the sink plug had closed the drain and could no longer be opened. The reason for this was that the pressure plate on the sink plug was too small. Any normal person would go to the…
P
Printables
Plug for hole in Chitu E1 filament dryer box
These little plugs close the two small holes on top of the rear side of the Chitu systems Filapartner E1. There are four more rectangular holes on the bottom. I added a plug for them, too. Update 2025_10_03: Released revision V2 that fits…
P
Printables
Vivosun VGrow Ventilation Plug
Inspired by https://www.thingiverse.com/thing:7102110 but totally new designed with the overhang it doesn't pop out itself, but can be removed easily when printed with flex material I printed in Geeetech TPU, other brand maybe shrink a…
P
Printables
Polaris Pool Cleaner Port Killer 2" Plug
I'm renting a house with a pool that was plumbed for a Polaris pool cleaner. The pool cleaner is long gone but the port just spills water when the filter pump is running. Thought I'd just it off the easy way since they didn't install a…
P
Printables
Stronger Kayoumini TPU Battery Straps + Cable holder + Balance Plug holder
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
P
Printables
Airsoft Hi cap to Lo cap conversion plug
Planning on some airsoft games that are closer to realistic. In need of magazines that are closer to low cap or milsim capacity. Didn't want to permanently destroy or alter the mags because they are expensive and I'll use them unaltered…
P
Printables
Lifetime Tamarack Scupper Plug
I printed these in TPU but any weather and sun resistant filament will work. Can be used with or without a pull cord Print Settings Printer Brand: VORON Printer: Doomcube Supports: No Walls 5 Infill: 25% Resolution: .25 Filament: TPU,…
P
Printables
Aircraft Engine Spark Plug Holder
Spark Plug Holder for servicing spark plugs during aircraft engine maintenance Design There are several designs available for download, each labelled accordingly. The car type spark plug holder is for engines that are adapted for car type…
P
Printables
multimeter connector plug
it seems simple but it took about 10+ prototypes to get it fitting just right and printing well with a 0,6mm nozzle, i printed it in ht-pla but there are probably more suitable materials for it no supports needed, 100% infill, you can…
P
Printables
M6x1.0 Plug
I made this in Onshape. I made it to plug a hole in a cereal container dry box. Maybe you can use it for something also. I printed it out of TPU, but any filament would plug a hole.
P
Printables
Sunlu S2 filament dryer plug
Slightly oversized by design — a quick sanding brings it down to a perfect, airtight fit.
P
Printables
Plug-in Hook
I designed this hook some time ago to have a towel hook in the bathroom where we can not drill as we are renting the house. I hope some of you might find it useful too. I updated to the version without pins.
P
Printables
Anker F3800 Battery Plug - Direct Access to Internal Battery
What if there was a way to tap straight into the core of a power station as versatile as the Anker F3800? To not only extend the runtime of the battery, but to merge with the battery itself - and gain direct access to the full potential…
P
Printables
The 100 Tank Plug mount – Back Side (Extended Version)
The 100 Tank Plug Mount – Back Side is a robust rear-side holder engineered to securely fasten plugs, cables, or auxiliary modules to the 100 Tank system. Its optimized geometry offers excellent stability while reducing vibration, helping…
P
Printables
Pickleball Ornament Plug
Pickleball Ornament Plug This pickleball is made specifically for outdoor with a hole diameter of about 7.16mm/0.282in. If you're running into issues such as the plugs coming off too easily or it's too tight of a fit, try increasing the…
P
Printables
flower aquarium plug
6 pieces from frag plug flower and 1 from frag plug flower 1.1 pet g Enjoy!
P
Printables
Flexible plug / lid for 'gridfinity rebuilt'
When storing many small items such as screws or components in a gridfinity rebuilt bin, there's always a risk of spilling. This lid / plug fits onto the standard 1x1 bin with one or two compartments and a label tab. The plug can be…
P
Printables
Revo Dust Plug
This M-Lite Revo dust plug is precision-printed in TPU to provide a flexible, durable seal that protects the M-Lite Revo by Filmatura battery/ SD Card compartment safe from dust, debris, and residue when not in use. Designed for a snug…
P
Printables
Simple Quest plug wire support
https://ninjatek.com/shop/cheetah/ was the filament. E3d toolchanger was the printer. This is a cable support I made for my Quest 2 USB link cable. I made this because I fell down the Mad God Overhaul Skyrim rabbit hole! Considering how…
P
Printables
Porsche 911 996 smooth bumper plugs
After removing the front numberplate on my 996, I was left with 2 square holes where the surround bolted to the car. these plugs are designed to fill in the holes to give the car a smooth look without having to have the whole bumper…
P
Printables
Boxer / Ducato / Relay Blanking Plugs for bumper holes
Blanking plugs for Boxer / Ducato / Relay bumper holes I printed in PLA because that's what I had set up.. will replace with TPU at some point. They are a tight fit so you will struggle to get them out. If you need to re size, I'd suggest…
P
Printables
Electric Tube Plug
Plug to close empty electrical tubes during building. Designed for «M20» tubes (the name has no relation to the thread, but to the outer diameter of the electric tube). Scale for other sizes. E.g. 80% for «M16». In Switzerland, we use…
P
Printables
Garbage Can Lift Bar Plug
Plug that holds the spring in garbage can lift bar.... The plastic bins they pickup by the bar. This bar is held int with two spring levers. The springs are held in with a cap. The cap is a bit special in that it has a slot for the…
P
Printables
Fiat Panda 141 Spark plug wire holder
Recreation of the spark plug wire holder. Probably fits other cars that use the 999 FIRE engine. Works well printed in Nylon by JLC3D. Simplified the attachment clip and replaced it with a friction fit.
P
Printables
Opera balcony, 3-part, pluggable, wall mounting possible, lighting possible
An opera balcony, composed of 3 parts, pluggable, wall-mountable, lighting possible, for placing e.g. Mini 13, Dummy 13, Lucky 13 figures (print at 150%). I made it for the figures of statler and waldorf from Alex as you can see at the…
P
Printables
Gas Cover Plug (Ford Excursion)
Rubber stoppers on my excursion were trash so i designed this "plug" looking thing to get the stance of the fuel door correct again. Printed in TPU with few walls and low infil time will tell but pops into place and holding up well now…
P
Printables
Spark plug as a gift box (Zündkerze als Geschenkbox)
I printed the original spark plug at 400% scale and thought it would make a great gift for a car enthusiast. Then I decided to turn it into a full gift box and tried my hand at a remix. It turned into a fantastic present.
P
Printables
Chainstay frame plug for my Specialized Tarmac SL8 Pro 2026
A) NOTICES (herunterscrollen für deutsche Version / scroll down for German language version) Non-commercial provision of construction files in . stl-format for a chainstay frame plug for my Specialized Tarmac SL8 Pro road bike by the…
P
Printables
BTT Kraken Plug-In-Cooler
Plug-In Cooling Duct for Bigtreetech Kraken Due to space constraints, I need a blower unit that mounts from the clamping side. There are some nice models available, but unfortunately, they're always mounted from the other side. Here's my…
P
Printables
Yaesu FT-60R Mic/Headset Plug Retainer, Squelch Knob Saver, Battery Protector
Mic/Headset Plug Retainer This attachment for the Yaesu FT-60R slides on to the battery and allows for the easy application of a rubber band to apply direct pressure to the mic/headset jack to make sure it doesn't half pop-out while…
P
Printables
Märklin H0 modular Bridge Rail-C R3-30° Element (multi part, pluggable) / Märklin H0 modulare Brücke Gleis-C Element R3-30° (mehrteilig, steckbar)
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
P
Printables
Parkside SCREWABLE battery adapter 20V power plug
📝Description This is a 3D-printed adapter for the LIDL Parkside 20V battery that turns it into a portable power source . Thanks to the use of a custom-designed clamping mechanism , there is no need for glue to secure the connectors ,…
P
Printables
CoreOne nozzle wiper with brass brush plugin
Nozzle wiper for the Prusa CoreOne with both an A1 mini brush and a brass brush for the more stubborn gunk. The brass brush is in a plugin that will pop off if the bed gets too close to the bottom of the printer. This means you can still…
P
Printables
Rialta Receiver Plug
A hitch receiver plug with Rialta branding. A Winnebago Rialta is a small Class C motorhome that Winnebago built mainly from the mid-1990s through about 2005 . The Rialta was built using a Volkswagen Eurovan chassis and is a classic…
P
Printables
Vacuum Hose Plug
Created to fit a Bissell Clean View (Model No. 3533). This piece is inserted into the handle of the vacuum when the hose is in use. I had the issue of dust and debris coming out the handle opening when vacuuming with the hose. My temp fix…
P
Printables
USB-C dust plug
USB-C dust plug for phones, tablets, notebooks and even for power banks Long body will keep it easy to pull it off The model is quite harder to put on, but it will hold and does not fall off when you have it in work clothes pockets, that…
P
Printables
Drop Keeper - Ethernet Drop Ceiling Plug - 1 Inch Hole
I made this model for use on some ceiling ethernet drops I ran for future use. I was up in the ceiling doing camera drops, and I added some extra drop for wireless access points later, I terminated to keystones, used a short patch cable…
P
Printables
Foldable Phone Holder for Wall Plug Charger
It is designed to hang directly on a wall outlet, providing a convenient shelf for your phone while it charges. The shelf and hook should ideally be 3D-printed from ABS or PETG, while the rubber ring and anti-slip pads are best made from…
P
Printables
Replacement Ladder Foot Plug / End Cap
Two replacement foot plugs for aluminium household ladders (e.g., Krause and similar): one for 40×20 mm legs and one for 33×20 mm legs. Print the plugs in ABS or PETG. The soles can be printed in TPU with 100% infill, or cut from a rubber…
P
Printables
Drain Plug RZR
We recommend print it with ABS, ASA or any material heat resistant. It was printed with 30% infill and 10 perimeteres beacuse its use is hard. You can subscribe to the YT channel to support us 👇 https://www.youtube.com/@makertomarket
P
Printables
Chevy Colorado Stake hole plug 2015-2020
This is a plug/dust cover for the holes on the pickup bed of 2015 to 2020 model years Chevy Chevrolet Colorado. I printed mine in 95Sha TPU for an interference fit I put my logo on mine, but left the uploaded model plain without any…
P
Printables
9v Volt Battery Box Holder for 5.5mm Barrel Plug (LED Lights)
9v Volt Battery Box Holder with 5.5mm Barrel Plug for LED Lights. Battery box is desinged to fit 5x2mm round magnets and a 36.5mm (just the female end) barrel plug. Support is needed where the barrel plug goes. I plan on making some…
P
Printables
Zátka do zrcátek / Plug to mirror holder Yamaha
Pasuje dobře zatím ani při vyšších rychlostech nevypadl. :) / It fits well and so far it hasn’t fallen out, even at higher speeds.
P
Printables
TISKEN bath plug holder
My bathplug has a very long stem, so it was difficult to store it without it rolling around. I designed this holder to suspend it from an IKEA TISKEN suction cup. Print laying flat upside down for best results.
P
Printables
SBA5 Hollow Storage Plug
This Storage plug adds stability to any SBA5 brace. It fits my TikTok Shop knockoff SBA5 well. That being said, it may need to be resized to fit your specific brace and application. I printed mine with on an AnyCubic Kobra S1 with the…