Paper Tube End Plug and Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Safe closure of paper tubes, suitable for storage and/or transport of long objects.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 48
- Makes
- 1
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use paper tubes to store long crafting items such as wire, wood and threaded rods, etc. Tubes are also good for protecting shipments. They come in many sizes and are really strong and durable.
This model is primarily for a tube with a inner diameter of 50 mm, however, I also provide a .STEP file and also below is a link directly to the OnShape modeling environment, where you can easily customize my design.
Print instructions:
- Material: PETG
- Layer: Bottom
- Bottom Plug V01: 0,2 mm
- Cap V01: 0,15 mm
- Upper Plug V01: 0,15 mm
- Perimeters: 2
- Supports:
- Bottom Plug V01: No
- Cap V01: No
- Upper Plug V01: Recommended
This model does not require any special settings, more details in the attached 3MF file.
Assembly instructions:
I recommend gluing the inserted plug in the tube. Of course, if you are going to store light things in the tube, this is not necessary.
I used a two-component epoxy glue, the joint is really very strong..
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
You can easily modify the model by changing the variables, see image above.
Current model version:
V01 All
Update YYYY/MM/DD:
Note:
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.
Print visions, create reality!