Counting matching models…
Endcaps for older Sony SA-CT260h soundbar, or other Sony soundbars of same hexagon shape. I wanted to get rid of the silver trim on the end so made these caps. Can be doublesided taped, or like i used a temporary silicone adhesive that…
I wanted to add some hidden magnets to the original part. added spots for a 10mm dia magnet, or 12mm dia magnet as well as a 10x20x3mm magnet in the rail itself.
Credits to revarbat for making the Snappy V3 3d printer. This model fixes the open space that was shown in the 3d printable 3d printer to make it more seamless. There are also templates I designed to make upgrades for this printer.
Front and back grills, and endcap have been modified, so it now allows inserting 6x3mm disc magnets. Thanks to use of magnets, you no longer need screws to mount endcaps, which improves look of the printer. Endcaps are also easy to…
Got an outdoor chair for free, but one of the tubes caps was missing. I believe you clip a canopy to the endcaps or something. Modeled with Shapr3d. V2 fits best. can be scaled to fit all tubes. In the photo the creme colored one was one…
I designed new endcaps for the drawer rails of several Siemens, Bosch or Neff dishwashers, as mine kept falling out. Fits on both left and right rails. Simply plug it in and lock it in place with the small part. You may have to hammer it…
Endcap/lid for 200mm diameter pipes. Printed with .25 layer height and 15% infill with Prusament PETG.
This is based on the very well designed Ultimate Kitchen Gridfinity - I've taken the f3d file for the solid base version to create only end caps and blank plates. Included are all combinations that with a 5x5 gridfinity space, which is…
I wanted to put the grenade launcher onto my M4, so I designed this.
A 3D printable USB port cover compatible with Lezyne KTV Pro 75 bicycle light , designed as a replacement for the original rubber plug. This small but essential part helps protect the charging port from: dust dirt water splashes moisture…
A 3D printable USB port cover compatible with Lezyne Mini Drive 400XL bicycle light , designed to replace the original rubber charging port plug. This small replacement part helps protect the USB charging port from: dust dirt water…
An blocking plug with an external SM1 thread. Can be screwed onto various thorlabs components and allows to block off beam pathes and close unneeded ports. Should be printed in PLA with a very hight resolution (0.1 or better) so that the…
M12 nut that i use on Yinlong LTO packs to isolate them. Don't overtighten it, it will crack due to layer orientation
Scissor lift end caps for a Haulotte scissor lift but suspect they would fit 50x90x2 or 50x90x3 RHS for anything, for 2 or 3mm beams , noticed there are actually two different thickness beams so made endcaps of two different sizes to fit…
This is a reversible end cap for the POTA33H antenna mast. Threads were added to both sides so a spike can be stored inside the mast when not in use. This is to keep the base from kicking out when guy'd. This WILL NOT keep the mast up…
Overview When cheesemaking, flipping of soft cheeses like Brie, Camembert, or Cambozola can be a treacherous process. Using traditional open-ended hoops often requires balancing cheese mats and cutting boards, which risks the soft curds…
I use the caps for protection purposes of sharp edges. In case there is the need for other sizes, let me know and I will add other metric sizes as well. Printed in ABS @0.2mm layerheight and 15% infill
This is a replacement end cap specifically designed for the metal bottom bar of 3DayBlinds roller shades. I printed in PLA, but any rigid material should be fine. It is specifically designed to be tight, so a little trimming of the fins…
To install, Unscrew the mag base. Then screw the new one in (super simple). The extenders are somewhat untested, let me know if there are any issues.
I have included the obj files if anybody wants to adjust it for there own needs. as this is my first remix it was made in tinkercad (still need to learn fusion 360) it is simple but functional. I printed it with the same settings I used…
Endcap for the under desk keyboard tray. I made this to cover the sharp edges of the metal drawer slide.
I really liked my PD36R, but I didn't like that I couldn't stand it on end to save me having to hold it in some situations, so I designed this endcap. It snaps on very securely. It also prevents the button being pressed accidentally,…
I got tired of my Maglite Mini rolling off my table, so I made this endcap with flat sides to stop it. The endcap slides over the back of the flashlight. There is a hole for a piece of filament to slide through the lanyard hole to lock…
This model plugs the ends of a collapsible camping table. After years of use, several endcaps were missing. The endcaps are friction fit; therefore, a very tight plug was made and printed with TPU to be flexible. They should not fall out…
I ordered these track lights from Aliexpress as a kit, sadly they didn't come with endcaps so I designed some up. One is just for closing off the end, the other has a hole for wiring. This is the kit I ordered:…
The Wixey WR700 digital readout for saw fence positioning uses a an extruded rail for sliding the readout. The ends of the rail are open, so this design is for left and right endcaps to give it a finished look. It can be just pushed into…
Here is a 40 x 40 mm end cap for the Ender 3 Pro, being placed in place of the fixings of the original screen. I created it after purchasing a Creality touchscreen. It fits perfectly and does not move once in place. Rafts: No Supports: No…
Replace the stock plastic endcap on cheap RC screwdrivers with a simple cap that can be color coded or a thumb twirler cap. Uses a single M3 socket head screw to attach. I may have used a hammer on the end of my cheap RC screwdrivers, and…
This 3D model is designed as a replacement part for the end cap of a cylindrical, hollow table leg, compatible with Ikea furniture. The end cap is precisely crafted to fit snugly into the inner diameter of the hollow table leg, providing…
Endcap for 40x40mm Type-B aluminum extrusion Source files included, includes STL, STEP and Autodesk Fusion files.
Plain and simple replacement for the endcaps on this awning, in case yours arrived broken or broke over time. Recommend printing in ASA, ABS or PETG in order of descending priority.
The sharp edges of the aluminum are easy to get hurt on, so I made these protective caps. Replacement endcaps for a Youngman new easiway loft ladder Inner dimensions are 38x17mm ( the part that is shaped like the letter i ) Outer…
wanted to dress up at the end of my 4040 extrusions. so I made these simple caps.
I needed a new set of handlebar grips that had room for an endcap so I could install my new 45NRTH Draugenklaw Pogies . So I added a hole to the end of the grip that is large enough (barely) to fit the endcap that came with the pogies. No…
This will cover the corner pieces of 30x30 aluminium corners. This fits the corner piece as can be seen in one of the pictures. A small pocket is also included to allow for longer screws.
If the endcap moves you can add paper in the round hole between the impression and the metal of the 3d printer.
Endcap for alluminium alloy roof bars made by Green Valley, cod. 156.607 ('Original' series) Fits pretty well, the outer profile does not match the bar prefectly but it's pretty close, ‘good enough’ for me! I recommend taping it to the…
This is a 20mm*20mm aluminum profile with cat's paw end cap. 2024/12/12 Added new cat head pattern styles
Adds 1" to your RepRack and a good spot to label the row
Prato amortecedor MadForce 1/8 . Shock endcap for Kyosho Mad Force 1/8
This model is from a 3d scan of triangular aluminum extrusion Mcmaster-Carr listing: Silver Anodized Aluminum—Smooth Rail Texture 40mm 40mm Hollow 8mm 12.2mm 45° 6575N28 The included CAD drawing for this extrusion is dimensionally…
General information At the end of 2024, I set up version 11 of Helmut Weigl's RoeTest . In the process, I created some 3D designs that I am making available to the community in this collection . You can read more information about my…
Corner endcap with mouting points for 4040 alu-profiles i used as table-legs. They are designed for a tight fit to hammer them on. I used them as bottom and top-part for 4040 profiles to build a little multiboard/skadis organizer. Can be…
This is a work in progress to develop a temporary antenna mount for when I'm operating within my car (not necessarily while driving). I don't expect it to withstand wind pressure at highway speeds, but perhaps in the future with…
Add-on to Filament Spool Holders by 3DStartups . I love the hanging spool holders by 3D Startups, but sometime they came apart unintentionally. This end cap works as a cam lock to prevent the arm from disengaging prematurely. Cap can be…
I wanted a custom height and solid bases for the Kitchen Gridfinity collection. I found a parametric remix with solid bases. However, it didn't include a parametric model for endcaps. To fix this, I modified the design to a parametric…
I lost mine, cadded this up; fits snug with the help of a small silicone o-ring (I used one from a convoy S2+ flashlight). waterproof, if your prints are.
I saw endcaps for other builds for MPCNCs in other pipe sizing so I wanted to make an endcap of my own to share with other builders. It's a nice addition to keep the dust out of one more place and to make the machine look a little bit…
This is a load tested bracket, I simulated a much higher load than filament would ever exert, my personal setup holds up to 13 rolls of 1Kg filament rolls, with the addition of more brackets it can be extended , The diameter of the rod…
I downloaded a few endcaps, but none fitted my 4040 aluminium profile, so i made my own. I printed it for my RatRig 750x800 workbench. You can simply change the tolerances in the fusion file if needed. I recommend to compare your profile…
A knitting needle endcap for needles between 4.5 and 5mm in diameter. Simply press onto the flat end of the needle.
tool to install rings that hold topcaps on front DT Swiss 350 hub process shown on video
It,s created as the endcap for 3030 alu profile with inner square 10x10mm . It takes around 18 minutes with 0,28mm, 60mm/s, 15% infill. It's completly enough to use one not so complex, just with center “pole”. Enjoy
PSA, the thin one works great but can sometimes be a pain to unscrew. I added a hole for something like an Allen wrench to the keyhole version to make it easier. I will upload some more textured options when I have the time. lmk if you…
Unistrut hurts when you walk into it, in high traffic area a wider end-cap makes sense. Often unistrut is not perfectly cut/de-burred, so in this design that part that goes into the channel is tapered. Recommend printing in TPU with a…
An endcap for 1" gardenhose systems. Requires a 1" rubber/TPU seal which can be found with my other models. Happy watering :)
An endcap for 1/2" gardenhose systems. Requires a 1/2" rubber/TPU seal which can be found with my other models. Happy watering :)
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
Fits onto the misumi 3030 extrusions with the 6.8mm hole and 8mm slots. Held by the middle pin and fixed against rotation by the small standoffs.
Assuming you've tapped your 2020 Aluminum extrusion, these endcaps use a M5 counter sunk screw to attach to the extrusion.
Support Arm Endcap With MMB V2.0 For ERCFV2's mod ERCT Buffer Support MMB V1 & V2
This is an extrusion endcap for the Ender-3 V2 or V2 Neo bit it should work for any 20 by 20mm extrusion. It’s been bevelled to look like the actual original endcap from the V2 Neo
This has only been made to more closely match the original endcap using TinkerCAD and Blender. It was made with the Ender 3 V2 and V2 Neo in mind but I think it will work for any 20x20mm extrusion. I hope this works well for you!
Don't we all know this problem? You're tying your shoes and suddenly the little plastic piece holding the string ends together, flies off into the sunset as you pull the strings tight. Oh no - the strings will start fraying and pull apart…
I increased the height of the lid to prevent the spools from flying off when printing.
Simple, but effective way to prevent your lithium bateries from shortening out when stored. To put it on the battery, just squish it by the lines and put it on. The end cap has also hole for measuring the voltage without taking the cap off.
I made a USB-C mod for the Miniware ES120 electric screwdriver. The endcaps for Revision 1 and 2 of the PCB look nearly identical. Make sure to use the correct one for your revision. https://gitlab.com/XenGi/es120-usb-c-mod
End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS
Print two end caps, one grid. Inital assembly requires melting the corners of the grid to the outside the endcaps, to give a smooth even edge. 1 - for clearance in the pipe, 2 - to hold it together. 3 - I used hot glue as an additional…
Removed the magnet holes from the reduced height versions of the gridfinity collection for faster print times. I only edited the endcaps as those were the ones I needed. Also added two more endcaps (2x1 & 2x3). The models are very crude…
This is the Support Arm Endcap for the Enraged Rabbit Cottontail Buffer for the ERCF v2 remixed to accept a BTT MMB CAN v2.0. The only change from the original v2 assembly instructions is the addition of two more m3 heat set inserts.
Replace your step stool foot caps with this custom-designed 3D model. Engineered for TPU filament, for protecting floors from scratches and stabilizing your step stool. Recommended print settings: Material: TPU (flexible filament) Layer…
The purpose behind this project is a hanger for filament spools. The end caps are needed to keep the PVC pipe on the hooks and the spools on the pipe. I've created 2 versions The first endcap version hangs on by friction. The second…
Endkappe für den Tehalit / Hager Brüstungskanal 100x70mm M4x10 Schraube und Beilagscheibe wird zum Festklemmen im Kanal benötigt.
Helps extended bottom rail for longer cabinets, allowing rack to be pulled out further. Original on the right, mine on the left in the picture.
Crazy end caps for a 20x20mm aluminum profile for Nut 5 & 6 mm If you want a special version, let me know. I will create it for you Different versions: Normal, closed With hole in the middle for cable feed through Cap half round Cap round…
Endcap/cover for Aluminium profile/extrusion 16x120E I-Typ Nut 8 : *** three versions of endcaps with different size of the fixing pin 4,4mm, 4,25mm, 4mm - with the 4mm you could use glue, 4,4mm holds mechanical very good.
This is a replacement end-cap / mount for Ikea MITTLED under cabinet LED strips. My original ones got broken by some overzealous children slamming drawers shut. This is a slightly simplified copy of the original piece. In normal use, it…
About This is an endcap to protect protruding ends of 27/18 C-profiles. It is meant to be press-fitted/hammered into the open end of the profile. Details Recommended Printing Parameters Orientation Print in the provided orientation of the…
Endcap for 25mm rods that extends them by a few centimeter. Has a taper inside so they're a press fit. I printed in PETG with 6 walls
I was not going to pay Anova a 4th of the price of a new cooker just for a tiny piece of plastic. Not an exact copy due to my lack of modeling experience. Can be printed without supports, it's bit steep, looks ugly, but it works. Feel…
If the phoenix contact ST1.5 terminal blocks (Reihenklemme in German) get mounted to a DIN rail they will leaye one side open. To protect against touching an endcap is needed. Sure you could buy them. But you could also print them. If you…
I purchased the H&R HAR-15 Blade Pistol Brace, but I found it uncomfortable to handle. To improve stability and comfort, I designed this Endcap Stabilizer, adding more surface area for better support. This Endcap may also be compatible…
This model is for use with Veranda 4x4" by 8' vinyl-sleeved pine posts. I removed the post (reuse for other project) and kept the sleeve to be used as a hydroponic channel. Bought these when they were on sale:…
This end cap is designed to work with 6x M10 wetlink penetrators and a 1" male PVC pipe. This endcap was primarily designed for the Eagle Ray ROV kit but can fit with any other 6" acrylic tube. Designed and used by the Allan Hancock…
