1 / 2
Paracord endcap for zippers and other uses - 2× ø2mm or 1× ø4mm — image 1
1 / 2

Paracord endcap for zippers and other uses - 2× ø2mm or 1× ø4mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

clips onto the end of cords - no knots, tools or extra parts needed

Rating
4.667 / 5
Likes
154
Downloads
592
Makes
8
Views
2,593
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent.

Also works for a single ø4mm end.

  • no knots
  • no tools
  • no extra parts
  • no support geometry

This print is tested with and developed for 0.25mm nozzles.

Changelog

Paracord End Cap 
2022-06-08v0.4initial public release

BOM

  1. housing
  2. retainer

Assembly

Prepare the paracord ends with melting to keep them from fraying, and to ease threading through the end cap eyes. Keep the melted part as small as possible!

Threading the loop end through the holes makes assembly easier. Using an iron wire also helps.

Production

Use a 0.25mm nozzle, the parts are tiny! Print quality will be better if you print several pairs - layer cooling time is too short if you only print one. 
Tested with ABS and PETG.

Alternatives

Dangletag, customizeable tiny name tag for two ø2mm paracord endsquick Paracord rope clamp 4mm & thimbleParacord thimble and rope clamp

Development

Please comment if something can be improved, or if it works for you. Also, don't forget to share makes and application examples!

Tags