P
PrintablesSASSy Design
Sharpie and Markers Hexagonal Holder Rack
A simple stand for markers of all kind
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
- Downloads
- 565
- Likes
- 252
- Rating
- 4.6
Search results: marker
Counting matching models…
P
Printableswenjuk
IKEA Komplement hinge drill-hole marker
Drill hole marker for IKEA complement hinges. For 19mm thick wood! !!! WATCH OUT !!! IKEA has changed the orientation for the softclose hinges, so check which markings are required for the model you are using. use Place the door and body…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
- Downloads
- 340
- Likes
- 25
- Rating
- 3.5
P
PrintablesNotJohnAfterAll
Paper Clip / Page Marker
This is Paper Clip that you can not only print very quickly , but also use to highlight pages in notebook or mark whole stacks of papers . To make it more flexible and bendy , shrink the model in slicer on Z axis to your value, originally…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
- Downloads
- 118
- Likes
- 13
- Rating
- 2
P
Printablesrobosocks
Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder
Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder I wanted to use larger solo cups with my cooler when at outdoor events. I think the stock tube comes is smaller, for the paper disposables. With this…
Print approx. €4.29–€5.25 excl. taxPreliminary estimate for one variant
- Downloads
- 110
- Likes
- 16
- Rating
- 0
P
PrintablesBallsagna
Golf Ball Marker with alignment aid for putting
Work in progress. Based on this redditors design: https://www.reddit.com/r/golf/s/S9aR5hANGf Just an arrow with the tip cut out to align with your golf ball when on the green. Simply place your ball marker, pick up your ball and continue…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 89
- Likes
- 7
- Rating
- 0
P
PrintablesIan Foulds
Filament Explosion Party Hat and Place Marker
This is a printable party hat that you gussy up by inserting left over filament. It also includes a matching place marker. It can be printed with no supports and the place marker has a hollow base if you want to fill it with sand for some…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
- Downloads
- 35
- Likes
- 15
- Rating
- 0
P
PrintablesJorge Jas
Stabilo markers & post-it notes stand base
Prepared for print
Print approx. €7.84–€9.58 excl. taxPreliminary estimate for one variant
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
Printablessh
🔦 Glowing light switch marker
Info: just a simple idea, how to make life little easier print 2 of these, glue it to the switch (or use 2 sided adhesive tape as me) and that's it Print instructions: fluorescent filament
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
- Downloads
- 23
- Likes
- 7
- Rating
- 0
P
PrintablesAbraxas
SDCard Marker Set
Use up not one but two colours you have barley nothing left of! Set to distinguish up to 6 SD Cards elegantly but as minimalist as possible. Designed to work with SDcards used on the MK3 models. One filament change required for maximum…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesBibiscus
Whiteboard marker holder
Whiteboard marker holder
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesDvG3DAtelier
Wallmount Speedmarker Lets Bastel Create - Improved handling / verbesserte Handhabung
The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesNathan Strong
Boardgame Upkeep Marker
Use this to keep track of numerous aspects of board games that need to be kept track of them all. I printed on a single nozzle and switched colors. Prusa i3 M2
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
- Downloads
- 11
- Likes
- 0
- Rating
- 5
P
PrintablesART TOO
Center Marker - Center Marking Tool (parametric)
Easy to print - center and quarter markings 3 sizes 10 mm 15 mm 20 mm You can scale them even further in the slicer
- Downloads
- 5,863
- Likes
- 2,411
- Rating
- 4.96
P
PrintablesBamBam Design
Bottle Cap/Marker V2 - Protect your Drink
Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…
- Downloads
- 5,015
- Likes
- 1,626
- Rating
- 4.9
P
Printablesosoderholm
Lockable Stitch Marker
Lock-style knitting markers. Works well when printed in PLA. I recommend printing with 0.15 mm layer height, but 0.20 mm is probably OK too.
- Downloads
- 2,464
- Likes
- 294
- Rating
- 4.88
P
PrintablesSpellbound Prints
Mini Monarch Marker - MTG Monarch Token / Mini Crown
A mini crown to pass around during your next commander game that involves the monarch mechanic! The size is just small enough to fit on top of your deck as a reminder to draw a card at the end step. :) No supports! Any settings will do.…
- Downloads
- 1,503
- Likes
- 184
- Rating
- 4.92
P
PrintablesChris (Aero)Engineering Design
Dovetail Marker
Update: Version 2 with improved printability available here This is a guiding tool to mark dovetail joints with different inclinations quickly and easily. This is best combined with an edge distance marker (like this , or this for…
- Downloads
- 1,464
- Likes
- 820
- Rating
- 4.75
P
PrintablesZdre
UNI POSCA Paint Marker Stand
This stand holds 30 16.5mm diameter POSCA markers. Holder conveniently angles the markers easy selection and quick stowing. No supports required as long as you have good adhesion. Brim is recommended. Minimal manual support in the middle…
- Downloads
- 1,270
- Likes
- 168
- Rating
- 5
P
PrintablesThomas H 3D
Dune sandworm - first player marker
Sandworm based on Dune 2021. Roughly the same size as the first player marker in the board game Dune Imperium. ~43mm in diameter. Designed to fit into my Dune Imperium insert https://www.printables.com/model/272184-dune-imperium-insert
- Downloads
- 1,045
- Likes
- 86
- Rating
- 5
P
PrintablesCasper Sangild
Golf ball marker tool
The golf ball alignment tool is a game-changer for any golfer looking to improve their aim and accuracy on the green. The tool makes it easy to draw straight lines and other markings on your ball, allowing you to line up your shots with…
- Downloads
- 1,036
- Likes
- 60
- Rating
- 3.89
P
PrintablesPeter C
Golf - Golf Ball Marker - Assorted
This is a simple golf ball marker (24mm diameter, 2mm height and 10mm spike) with attached files (initial version) and links to additional newer updated versions (separate models that are 25mm diameter). Template - emboss with your own…
- Downloads
- 936
- Likes
- 134
- Rating
- 5
P
PrintablesBuchtomil
XLR Cable Label Rings - quick marker
Simple but extremely practical rings for quick labeling of XLR or other audio cables. No more guessing which cable belongs to which channel – just snap the numbered ring on and you’re done. Designed for ≈ 5 mm cable diameter (typical…
- Downloads
- 921
- Likes
- 180
- Rating
- 4.5
P
PrintablesBobbyMcWho
MTG Counter Marker
Inspired by this model , I designed this from scratch to print easily w/ no supports and with easy assembly. Print both sides for a +X/+Y counter marker, print just the hole side for a +X marker. You can scale these as needed in your…
- Downloads
- 874
- Likes
- 118
- Rating
- 4.67
P
PrintablesChris (Aero)Engineering Design
Dovetail Marker v2
This is a guiding tool to mark dovetail joints with different inclinations quickly and easily. This is best combined with an edge distance marker (like this , or this for example), if you don't use the complete length per side, which is…
- Downloads
- 855
- Likes
- 199
- Rating
- 5
P
Printablesfirstgizmo
3D Scanning Marker Target Tree
This marker tree holds up to four marker and makes for easy to recognize features for your scanner. It comes in two versions. One with magnet and one with a threaded base. It is intended to be used with 4x2mm round magnets Printing: Just…
- Downloads
- 821
- Likes
- 106
- Rating
- 5
P
PrintablesSteveJohnsen
Center Marker Finder / Gauge / Template, 90 & 45 Degree Square & Protractor, for Dowels, Square Stock, etc. - UPDATED: 6 Slots Widths
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
- Downloads
- 783
- Likes
- 114
- Rating
- 4.73
P
Printables3DJob
3D scanning markers
These markers can be used on my heavy duty turntable.
- Downloads
- 717
- Likes
- 46
- Rating
- 5
P
Printablesdode513
3D Scan Marker Tracker Dot CR
Please hit the like button! I remixed this Marker to hold Creality( Ferret, Otter, Raptor ) tracking dots. I added a slot for a 5-8mm magnet. Furthermore, I think that will work with all manufactures for dots, but print 1 sample to test…
- Downloads
- 697
- Likes
- 48
- Rating
- 5
P
PrintablesNikita
Kill Team objective markers + token markers
Kill Team 3rd Edition Objective Markers and Token Markers Objective Marker 40mm inner circle plus a 1" outer circle to represent the control range. Token Marker 20mm hole designed to fit a token of your choice (e.g., smoke grenade) with a…
- Downloads
- 641
- Likes
- 35
- Rating
- 5
P
PrintablesMiaoucat
Red Cross Emergency First Aid kit marker for IFAK camping tactical airsoft larping zipper
imagine a situation where somebody cut himself and he ask you to fetch the FirstAid kit in a backpack. WHERE? most backpacks have 5pockets+ and hiding places. you cannot afford to waste time in an emergency situation! here is the…
- Downloads
- 477
- Likes
- 150
- Rating
- 4.88
P
PrintablesIan B.
Dune Imperium Combat Marker
Plastic version of the combat marker to match all your other 3d printed goodies. I didn't see this one anywhere, so I figured I'd make it. I've included two versions of the token, so you can remix the icon to your hearts content. Layer…
- Downloads
- 456
- Likes
- 44
- Rating
- 4.5
P
Printableslegosrock
Root Board Game VP Marker Stand
Stands for the VP markers for the board game root by leder games. I always found it difficult to manage several vp markers on the same spot, so this allows at least two to fit nicely together.
- Downloads
- 453
- Likes
- 78
- Rating
- 5
P
PrintablesReven
MTG counter and ability markers template
“Look, ma: no stl!” I really liked Tony Youngblood 's Magic: The Gathering Counters . But I wanted to make a couple new ones using the updated symbols from MTG Arena. I was looking for an svg of the new symbols when I stumbled upon “ Mana…
- Downloads
- 432
- Likes
- 44
- Rating
- 5
P
PrintablesTower 3D
Minimalist Vertical Marker Organizer (Editable)
A sleek, space-saving organizer for markers and pens. The angled shelves provide perfect visibility and easy access, while the rear compartment handles taller items. Print Settings Orientation: Print upright (as shown in the 3rd image).…
- Downloads
- 375
- Likes
- 125
- Rating
- 5
P
PrintablesMakerTom
Glass Identification Marker Clip (for Ikea Glasses and others too)
If you're also tired of the question “who's glass is this, is it mine?”, this simple marker clips are especially for you! If you have >0,3m of filament and about 1 minute left, you can print one clip. No supports, easy to print. I printed…
- Downloads
- 352
- Likes
- 59
- Rating
- 4.89
P
PrintablesKatz Creates
Modular Vertical Honeycomb Copic Marker Stand
Note : Photos show the old logo, files will have new updated Katz Creates logo! My ridiculous collection of Copic Markers needed a home on my new desk, so I designed it one! Since the desk space is somewhat limited, I thought the best way…
- Downloads
- 335
- Likes
- 80
- Rating
- 4.8
P
PrintablesSablebadger 3D
Objective Markers - Graveyard Stones
Need some cool objective markers in a graveyard setting? I made a set for your fantasy table that really punches it up a notch! This set is a set of headstones, with optional numbers to use for marking important locations. If you like…
- Downloads
- 316
- Likes
- 76
- Rating
- 5
P
PrintablesSarah R.
Token of Death - Frosthaven Deathwalker Enemy Marker
The Deathwalker class in Frosthaven has a mechanic that allows a specific enemy to be a target, but trying to keep the little round class marker on the standee base was very frustrating. This little clip is remixed from a marker that…
- Downloads
- 301
- Likes
- 21
- Rating
- 0
P
PrintablesVaclav Poduska
Leather stitching marker
These stitch markers works same as your wing dividers for marking a stitching line onto the leather surface. The advantage is that these are set to the same distance all the time. You can change wing dividers between projects and you…
- Downloads
- 282
- Likes
- 65
- Rating
- 5
P
PrintablesMr. Cookie
Stitch Marker Cloud
Stitch Marker for knitting. Does not have a slit. Suggested equipment, material, and settings: Nozzle: 0.25 mm Material: PLA Layer height: 0.1 mm Number of perimeters: 2 Printer used for prototyping: Prusa i3 MK3S
- Downloads
- 278
- Likes
- 78
- Rating
- 5
P
PrintablesFwiffo
uni-POSCA™ Paint Marker Box
Everybody seems nuts for POSCA™ paint markers/pens, so I got myself a set. I liked them so much that I bought two more sets so I had more sizes. But then I wanted a nice box to store and organize them in. It has room for 15 PC-5M, 18…
- Downloads
- 234
- Likes
- 50
- Rating
- 2
P
PrintablesLavishCoPrints
Expo Dry Erase Marker Magnetic Clip
Heres a simple Magnetic clip to attach your expo marker to a whiteboard or anything magnetic. I didnt have 10x3mm magnets on hand so I just make it with 5 6x2mm magnets. Both files are below. If you would like a different size, feel free…
- Downloads
- 211
- Likes
- 17
- Rating
- 0
P
PrintablesZdre
UNI POSCA 16-marker stand for 3M size
3mf included with a painted seam. model oriented backwards to hide internal seam when using “Rear” ream alignment. Brim recommended just in case, as the overhang is 60º. No supports required.
- Downloads
- 201
- Likes
- 23
- Rating
- 5
P
Printablesmassayoshi
Too Many Bones Day/Progress Marker
Too Many Bones - Day/Progress tracker I don't have the official Adventure Map. So I put together a bunch of files in Blender and created this Day/Progress tracker How to Use The bones at the top function as an arrow to mark the day and…
- Downloads
- 198
- Likes
- 22
- Rating
- 5
P
PrintablesMZ4250
Numbered Size Markers when you don't have enough minis
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
- Downloads
- 195
- Likes
- 32
- Rating
- 5
P
PrintablesАртем Стрельцов
Minimalistic 3D Scanning Marker
The magnets fit snugly, but I used a bit of glue for a secure hold.
- Downloads
- 165
- Likes
- 28
- Rating
- 5
P
PrintablesMike Graham
Acrylic paint marker holder 60 count
I bought a set of acrylic paint markers and needed something to put them in. This holds 60 markers up to 14mm
- Downloads
- 159
- Likes
- 14
- Rating
- 0
P
PrintablesLevanter
Arch / Dune bookmark - page marker
Following up with the trendy Arch / dune pattern. Here are 3 formats of this pattern in the form of a bookmark / page marker. One format is full and thin, the second is full and “thick” (suitable for thick paper) and the third one is…
- Downloads
- 148
- Likes
- 25
- Rating
- 4.67
P
PrintablesBean Designs
Plant Tags/Markers - 15
Plant Tags: 0-Cucumbers 1-Strawberry 2-Pepper 3-Tomato 4-Zucchini 5-Potatoes 6-Oregano 7-Rosemary 8-Chives 9-Basil 10-Thyme 11-Carrots 12-Radish 13-Berry Bush 14- Blank
- Downloads
- 146
- Likes
- 20
- Rating
- 0
P
Printableslegosrock
Root Lost City Clearing Marker
This Is a remix from Sare93's great clearing markers - this one has three suit spots for the lost city landmark mini-expansion pack. Suits provided were made by Sare93 When I printed the main markers, I did x&9 at 90% and z at 70% to make…
- Downloads
- 122
- Likes
- 21
- Rating
- 0
P
PrintablesJamehz
Apiary Boardgame Player Markers
These are simple bee-shaped markers used for the Apiary boardgame. The game comes with small cubes which are fine enough, but aren't very fun. This will make them much more appropriately themed. They measure slightly larger than the cubes…
- Downloads
- 122
- Likes
- 23
- Rating
- 5
P
PrintablesJPOCK
Surveying Layout Marker
Control point pin designed to be printed in two colors. I used orange for visibility and black to give a contrast.
- Downloads
- 120
- Likes
- 7
- Rating
- 0
P
PrintablesSC3DPrints
Tent Guy Line Marker
This is a very simple and easy to print guy line marker that just clips onto the guy line. It is made to fit 550 paracord but should be easily scalable in the slicer to fit any size. It works pretty well, although it is only visible from…
- Downloads
- 119
- Likes
- 24
- Rating
- 5
P
PrintablesJustin B
Dry Erase Marker Holder
A holder for dry erase markers to hang on top of little white boards. The white board I made this for is about 7mm thick.
- Downloads
- 119
- Likes
- 22
- Rating
- 5
P
Printablesevd
Gridfinity Marker Texta Posca Holder
Sized to fit a PC-5M Posca and similar sized markers.
- Downloads
- 116
- Likes
- 11
- Rating
- 4
P
PrintablesMAK
Marker holder - Parametric
a parametric Marker holder Need a specific holder for your markers/pens/other then just tweak it to your liking. Adjust - Hole size - Amount of Rows and columns of holes - Depth of holes - Tilt angle - All other parameters if you're…
- Downloads
- 111
- Likes
- 49
- Rating
- 0
P
PrintablesAbnormAnomaly
100 Count Marker Holder & Organizer
This was originally made to hold 100 Crayola Super Tip Markers, but will hold any marker or tool around 10 mm in diameter or less. It can also be scaled to hold larger items. The bottom portion is slid down the 4 poles on the bottom and…
- Downloads
- 110
- Likes
- 18
- Rating
- 5
P
PrintablesYadira Vela
Garden Markers
This is the PayPal donation page for the Printables account @YadiraVela_1065681 and @danibcorr https://www.paypal.com/donate/?hosted_button_id=3TCWGABK23ER2 . Thanks to donations we can cover part of the time invested in making our…
- Downloads
- 109
- Likes
- 32
- Rating
- 0
P
PrintablesPushedPlastic
Quilters Row Block Markers
Quilters row block markers are made from PLA or PETG plastic, and are set up so you can be more organized while crafting your project. Simply use the letters and numbers, put a pin through the integrated hole in the plastic to attach it…
- Downloads
- 106
- Likes
- 34
- Rating
- 0
P
PrintablesZachryWD
Pen / Marker Holder with Wall Mount
This modular pen / marker holder design can be placed on a desktop for easy access and organization. When not in use, the holder can be placed on the included wall mounts saving you desk space but keeping everything within arms reach.…
- Downloads
- 106
- Likes
- 43
- Rating
- 0
P
PrintablesWilliam Fischer
Skyrim Shrine Map Marker Bookmark
A bookmark based on the Skyrim Shrine map marker
- Downloads
- 104
- Likes
- 31
- Rating
- 0
P
PrintablesFDesigns
Personal Marker disc/Put down disc (editable)
Here is my Version of a Mini marker discs/put down disc that you can personalize for yourself using FUsion 360 with the included file. Have fun! **I am in no way affiliated with the brand that is on the model. I just liked how it looked.…
- Downloads
- 99
- Likes
- 9
- Rating
- 0
P
PrintablesKapii
Root Markers Victory Point VP token
Root Markers Victory Point VP token
- Downloads
- 99
- Likes
- 7
- Rating
- 0
P
PrintablesAustin H.
Expo Marker Magnetic Holder
Magnetic mount to store 4 of your Expo dry erase markers to most dry erase boards. I used 8 - 5mm x 5mm cylindrical magnets that are embedded in the print, just add a pause right before the holes close up. The hole itself printed at 5.1mm…
- Downloads
- 97
- Likes
- 14
- Rating
- 0
P
PrintablesSablebadger 3D
Objective Markers - Ancient Sandstone
I worked up a set of Objective Markers for the terrain I've been building in an Egyptian theme. You can find other models in my Ancient Sandtone line here as well. Each one is unique and comes numbered with small hash marks on one of the…
- Downloads
- 91
- Likes
- 23
- Rating
- 0
P
PrintablesBoris
DnD 5e Spell AoE Markers
Printed without brim with a layer of glue. While slicing, added a change of filament for nice visibility of the numbers. Resize to fit your grid ;) I use a weird grid.
- Downloads
- 82
- Likes
- 5
- Rating
- 0
P
PrintablesReed Bowman
Explosion game marker with flat base
To make myself a copy of the print-and-play (PnP) solitaire boardgame Under Falling Skies I wanted to make the markers more interesting than the originals. I made the aliens based on the original Space Invaders game (but I haven't…
- Downloads
- 70
- Likes
- 6
- Rating
- 4
P
PrintablesPapamiracoli
Wallmount Speedmarker Lets Bastel
This is a Wallmount for Lets Bastel Speedmarker. It is designed to screw it on a wall. Another possibilty is to fix it on a wooden plate to use it on a french cleat wall. The punches are made for conutersink head screws up to 3.5mm…
- Downloads
- 69
- Likes
- 7
- Rating
- 4
P
PrintablesPeter C
Golf - Golf Ball Marker - NHL - Atlantic - Toronto Maple Leafs
Toronto Maple Leafs NHL team golf ball marker (25mm diameter by 2mm height and 10mm spike). 2 versions available (embossed for SLA and single filament FDM printers and a multifilament version for multifilament FDM printers). Usage Place…
- Downloads
- 66
- Likes
- 7
- Rating
- 0
P
PrintablesSigismond0
Root Homeland Expansion - Enclave Tokens for Resin Clearing Markers
Easy multicolor print, just add in a color change at the appropriate layers. Set on the board alone when peaceful, or cover the suit when angered.
- Downloads
- 66
- Likes
- 6
- Rating
- 0
P
PrintablesSpankyTaz
Gaslands Explosion Marker
A marker to show that something has exploded. I designed this for use with Gaslands, but it could easily work with any tabletop game (RPG or Wargame) and can be scaled up/down accordingly. The marker also comes with a drilled base for…
- Downloads
- 65
- Likes
- 15
- Rating
- 0
P
PrintablesJason
Corny Keg Post Marker
To make it easier to workout which post is which on a Corny Keg, I have made this simple marker. Printed in PETG. Yellow for Liquid. Red for Gas.
- Downloads
- 64
- Likes
- 13
- Rating
- 0
P
Printablestelefaksi
Pica marker cutting objects for making Gridfinity bins
Since everyone has different collection of Pica markers I decided to publish cutting objects for Pica markers and as a example the bin I made for myself. Included in the files are Pica-Dry, Pica BIG Ink, Pica-Ink, Pica Fine Dry, Pica Fine…
- Downloads
- 62
- Likes
- 14
- Rating
- 5
P
PrintablesLittleWorld580
Puffco Plus Disguise Marker
This is a 3D Model of a Marker that will perfectly fit a Puffco Plus Portable Dab Nail. Its not a very good disguise so I would not condone using this to smuggle the pen into places it shouldn't be, however, it does do a good job at…
- Downloads
- 62
- Likes
- 10
- Rating
- 5
P
Printablesnp-dev
Objective Tokens / Question & Riddle Markers
Question and Riddle tokens, or objective markers, that can be used for the Batman Miniature Game (https://www.batman-miniaturegame.com/) or other miniature games. This pack contains three different tokens, each on 22mm and 30mm bases. All…
- Downloads
- 56
- Likes
- 7
- Rating
- 0
P
PrintablesBlack Portal
Uni Posca Stand for 0.7mm ( 20 markers)
That's a simple Posca Marker Stand for the 0.7mm marker version.
- Downloads
- 53
- Likes
- 4
- Rating
- 0
P
Printablesakamaka
PrusaXL - Simplified Nozzle Size Marker R1
PrusaXL - Simplified Nozzle Size Marker R1 Still only two parts - simple snap in retainer, with improved indexing spring.
- Downloads
- 51
- Likes
- 6
- Rating
- 4.5
P
PrintablesAnlimo
Open markers for knitting, crochet or other stuff
Open markers with letters. Some are 2mm high, and others 2mm but the letters are 2,2mm for easier color change. I saw some on thingivrese like this, but with numers. I drew these my self.
- Downloads
- 48
- Likes
- 29
- Rating
- 0
P
PrintablesAgus Ortiz DI
Marker Holder x36
Printed with standard parameters turn out perfect
- Downloads
- 47
- Likes
- 20
- Rating
- 0
P
PrintablesAIMDaAlien
Blank Garden Marker Stakes
Designed for those of us who'd rather handwrite labels than fiddle with text customization in the slicer. Works great for seed starting, hydroponics, herb gardens, or any situation where you need to label things. Tip: Oil-based paint pens…
- Downloads
- 44
- Likes
- 3
- Rating
- 5
P
PrintablesBrownBEAR
Numbered (1 - 6) Tabletop Wargame Objective Markers - 40k/AoS
These easy to print and use objective markers simplify knowing if your squad is in range to hold or contest an objective. If your model's base is on the marker, then you are on the objective. Objectives are numbered 1 - 6. 6 inch diameter…
- Downloads
- 39
- Likes
- 5
- Rating
- 0
P
Printablesasit217
Garden Markers
I created these for my mom to designate herbs in her herb garden. I made them so the plates on the markers are interchangeable which allows you to update and change them without having to print the whole marker again. I also created a few…
- Downloads
- 36
- Likes
- 3
- Rating
- 0
P
PrintablesPoccha
Mini center marker
This is a small center finder/marker I designed for small dowels and square shapes. I included a ball recess and small chamfers where the walls meet to clear bits of rubbish or edges that have fuzzy spots. Printed in PETG, but PLA will…
- Downloads
- 35
- Likes
- 12
- Rating
- 0
P
PrintablesGTM
assorted seed row markers
i can make custom stakes at request (PM me)
- Downloads
- 34
- Likes
- 10
- Rating
- 0
P
PrintablesMaxime Turcotte
Cryptid Board Game - Insert - Bear & Cougar Territories - Alternate Markers
The insert is made of 6 parts. No need for support. Cougar and bear territories need support (tree shape). Stone and shack not included, they are from another creator. Stl & Step files are provided for remix. Enjoy.
- Downloads
- 30
- Likes
- 7
- Rating
- 0
P
Printablesakamaka
PrusaXL - Simplified Nozzle Size Marker
PrusaXL - Simplified Nozzle Size Marker Only two parts - simple snap in retainer. See the upgraded version: https://www.printables.com/model/761237-prusaxl-simplified-nozzle-size-marker-r1
- Downloads
- 30
- Likes
- 2
- Rating
- 3.5
P
PrintablesDev_JS
Doomsday Discs Mini Markers (x3)
Mini marker with Doomsday Discs logo. Designed for Team Doomsday members and fellow fans. scale may need to be adjusted NOT FOR COMMERICAL RE SALE side note: Please dont be that person online offering to print these for monetary gain…
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
PrintablesThe 3D print forge
Crochet stitch marker
A stitch marker for crochet and knitting
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
PrintablesKingbobthe374th
Cricket Bowling Marker
Basic bowling run up marker. Just stamp into ground to mark run up.
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
PrintablesEC
Dune Imperium Combat Marker (compact with +20 underneath)
A remix of Ian’s Dune: Imperium Combat Marker with a more compact profile and reduced Z-axis height. I also added a “+20
- Downloads
- 22
- Likes
- 4
- Rating
- 5
P
PrintablesDamadgediceDM
Monster/player life tracker with status marker pole
this is a life tracker i made a long time ago for tracking DND life one case version hangs on a DM screen on is meant for players to use they both have a pole to add tracker rings to easily see if your slow or hasted or any other status…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesMarcidy
Stitch Markers - Polygons
Just a few polygon shaped stitch markers. I recommend printing them with a 0.4mm nozzle or smaller. If the size doesn't satisfy you, just scale it up or down in the slicer. Technically the circle is a polygon too, because it is…
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
PrintablesKen K
Dry erase marker holder
Prints flat. Note the top vs bottom clips. Holes on back for magnets to glue in. Tinkercad linke:…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesWilliamLund
Token Modifier Markers and Case for WH AoS
These are tokens and a token holder I made for Warhammer Age of Sigmar. This page includes the insert with the slots for the carrying chest - however the chest is a remix of a cool model I found here on printables - the remix is available…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesRhanson
Active Player Marker
This is a marker for the active player of a game. With the talk and banter of some games sometimes it takes a moment to remember whos turn it is. Hopefully this will help. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
Printablesavipars
Arrow Bookmarker with Keychain
FDM Printer: You will likely need to print it using supports due to the addition of the name and/or keychain hole (areas prime for overhang issues) Resin Printer: You should be fine to print this, I don't have much experience with resin…
- Downloads
- 16
- Likes
- 3
- Rating
- 0