1 / 4
Expo Marker Magnetic Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic holder for 4 standard size Expo dry erase markers
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 98
- Makes
- 1
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Magnetic mount to store 4 of your Expo dry erase markers to most dry erase boards. I used 8 - 5mm x 5mm cylindrical magnets that are embedded in the print, just add a pause right before the holes close up. The hole itself printed at 5.1mm x 5.1mm but your mileage may vary depending on your tolerances.
- First layer height 0.2mm
- 10% Gyroid infill used and it is really more than you need
- No supports needed
- I used 8 magnets but the holding power is much higher than I thought it would be
- I think you can get away with just populating 4 of the holes but the final layer is pretty thin so fill all 8 if you have any issues with bridging
Printed with Elegoo's Yellow PLA +