389 models
This test piece allows you to estimate the shrinkage of the material. The piece is designed for resin printers, however, it can be also used for FDM printers to estimate shrinkage and You should print the test piece with regular settings…
Accurate reproduction of the human spine, with support base for exposure. Instructions Printed parts can be assembled without using glue. The plate can be personalized by attaching a sticker. Category: Biology
Ironing Flow Test model for testing 10% thru 60% flow in 10% steps
Holder for Expo Dry Erase Set. There are two versions, one for 4 markers and one for 6 markers. It can be attached to a wall using Command Strips or placed on a desk or table. There are also recesses in the back for gluing 6 mm diameter…
Shimano technical training has a process for cleaning the pistons on the disc brake calipers which relies on cutting down a bleed block (such as this design is based upon) to make a piston exposure tool. Having to hack apart a bleed block…
same model but exported as separate files as the original STL file won't work in Cura Slicer.
Use the Ball Buddy to customize your golf ball. For SLA or FDM single filament printers this model has two versions of the magnetic golf ball stencil holder (exposed and covered magnets). Both versions made up of two ball holder halves…
I made this R_E_R_F test for my Anycubic Photon Mono M5S Pro. I didn't like the original R_E_R_F from Anycubic because I want a clear feature showing success or failure. Thats why I took the Cones of Calibration V3 - made by…
For printers like the Saturn 4 Ultra that support resin calibration by printing multiple exposures in the same print, it is difficult after print to distinguish between the exposures. To avoid removing and cleaning them one by one, this…
The Exposure Calibration Test Stop wasting time marking your test prints with pens that wash away in IPA! This is a functional remix of the XP2 Validation Matrix by Photonsters Key Improvements in this Remix Embossed Numbering (1-8): Each…
I created this file in the context of helping a friend with his Harry Potter Kinder Joy collection, I started by using an image I found on the internet and moved it to the program (3D Bulder) and created the shape of the piece as you can…
News 5 April - Uploaded files for Expo Marker Holders Expo Marker Holders: I designed these marker holders for the instructors in the schoolhouse that I work in. They live off of whiteboards and needed something to hold the markers…
simply adding ready to print stls instead of obj that had issues with orca
This STL is an 8-up copy of the Photonsters Resin Exposure Test v2 arranged for use with the Anycubic Photon M3 Plus. Here's what I've done: Subdivided the 197mm x 122mm build platform into 8 equal sections Scaled the original STL by 95%…
Thank you to @Darragh for supplying a .step file for me to add another layer of resolution to their exposure test for my mono resin printer. Just for clarity, you will have to adjust the exposure time in your slicer to match the number on…
This is the original Siraya Tech Test 2021 V5. I just used Orca Slicer to arrange in the position for the multi exposure test on my Elegoo Saturn 4 Ultra. And cut the numbers on each test so they match the numbers on the screen of the…
Pinhole Exposure Calculator , inspired by Richard Koolish paper calculator , is a model designed to assist users in determining the optimal exposure time for pinhole cameras. The calculator comprises three disks, each contributing…
Holds 8 markers with satisfying snap-in action. Just add a couple of adhesive pads.
You'll be able to replace your original print head housing with this exposed print head setup using only the original screws. SETTINGS: Slice the model upside-down (see photo) with a tree structure support in a zig zag pattern only…
The exposure memory lock button for the Nikon F3 SLR film camera. These things are known to break and fall off the body.
wifi boad no sd card and no exposed Wi-Fi chip
Este diseño es uno de los test de nuestro nuevo curso de impresión 3D con resina. Info del curso aquí https://control3d.net/curso-de-impresion-3d-con-resina/ Suscríbete aquí https://control3d.net/registrate/ Test de exposición y…
For the conscientious golfer who likes to fix their ball marks made due to hard impacts with the green surface by their ball so that other players can also enjoy a smooth green surface. Usage Divot repair tool - Ergonomic design with…
Here is my personal configuration file for my Prusa MK4S + MMU3. I first imported PrusaSlicer configuration and adapted some bad conversion parameters and optimisation (for my usage). PETG and PLA profile No HF config Only 0.4mm nozzle…
Friction fit screen printing frames. Use the tension ring to secure a piece of mesh screen printing fabric to the frame. coat in UV resin and expose using your resin 3d printer. Watch the full video and demonstration here:
Remixed base block from this https://www.printables.com/model/479716-ps5-dualsense-controller-phone-mount
I designed this because I wanted to rack-mount my Mac mini with the I/O accessible from the front, and I couldn’t find anything that actually fit my needs. The design is intentionally simple, but it does the job well. The front panel is…
hay dos maneras de montarlo, recomiendo hacerlo con un poco de pegamento, pero no es necesario.
Royal Canadian Air Force U.S. Export McDounnel Douglas CF-18 Hornet
http://www.sp-dynamo.com/8Xseriesdynamo%20hub.html http://www.sp-dynamo.com/8-series-pic/connect-installation.pdf instructions for connector installation. I have an Exposure (rebrand of Shutter Precision) PD-8X 6V, 3W dynamo hub, for…
When using the exposure test of the Elegoo Saturn 4 Ultra 16K, the individual test objects must not overlap the boundaries of the 4, 6 or 8 segments under any circumstances. To ensure this, especially with larger test objects (e.g. the…
Holds 5 Fine tip Expo or Sharpie Markers. Uses standard 8mmx3mm magnets with light press fit(use some super glue to hold). Great for whiteboards in classrooms or on your fridge to write notes.
This builds upon MR_DUCT's design by adding holes to mount the holder onto the wall with #6 (or #8 if you're careful) screws. I've also added an additional (optional) holder for expo cleaner if you buy a marker kit that includes it. Thank…
Modelo para imprimir de una pieza, sin tener que pegar piezas. Son necesarios soportes
I loved the design language used by lendres' "Expo Dry Erase Marker Set", but I wanted to store the markers horizontally so they would preserve their ink. After storing dry erase markers vertically and upside down, the ink either drains…
This model is very similar to the original one, except I added two “ears” and two pegs to be able to mount it to the frame of my whiteboard (see pictures). Kudos to @lendres for the original model anf for providing the Fusion360 files so…
Uploaded files do not include the logo shown in the photos--feel free to add your own! Print with the back surface down and insert a pause to insert magnets. I used these magnets.
A simple holder designed to hold 14 Expo dry erase markers and one Expo dry eraser. I initially added 6 small holes in the back to hold six 8x3mm magnets, but I have also included a version with a flat back. I have also included a…
Heres a simple Magnetic clip to attach your expo marker to a whiteboard or anything magnetic. I didnt have 10x3mm magnets on hand so I just make it with 5 6x2mm magnets. Both files are below. If you would like a different size, feel free…
Los módulos se sujetan de una guía, que debe fijarse a una superficie vertical. Pueden quitarse a mano simplemente subiéndolos, y pueden reordenarse a voluntad. Muy prácticos para tener relojes y anillos a mano y no sufrir intentando…
Here's a remix of the waving octopus model with an exposed brain. Change the filament after the layer at 45mm to have a different colour for the brain as pictured.
Numbered for use with Elegoo Saturn 4 and Mars 5 resin exposure testing tools. I've set the cover image as an example on my own Mars 5 plate, set to 60% scale. For an example on how to use the test properly, see the linked video: I didn't…
Includes a little space for you to add a card with details, a name, ar date… whatever
My daughter asked me for a display stand for her Stranger Things Kinder Joy figures, and I looked here on Printables, but I saw that similar designs were all in .3mf files, which weren't very good for me, so I decided to make it in .stl…
I got tired of my markers drying out from being stored vertically so made this horizontal snap in holder. It has a satisfying click and firm hold. The opening is slightly tapered to match the markers and there is an arrow on top point to…
A little coffee machine accessory collection with a nice tray to hold it all together. UPDATE: I have printed all of these by now, and am glad to report that everything fits together nicely.The funnel has a tight fit in the tray fresh…
I didn't like any of the existing expo marker holders and my dry erase board in my office isn't magnetic so I needed something that could clip onto the tray. Features : ✓ Prints flat with no support ✓ Uses minimal material ✓ Markers can…
I created this to solve things that frustrated me with existing holder designs. The box type take up too much whiteboard space, the trays are frustrating to use and have scratched folks more than once, not to mention bumping them creates…
This is model of the Thor's hammer as a museum exposure. The base is 120 mm long and 70 mm wide. The hammer is 38 mm long and 23 mm wide. It is possible to print it on FDM and resin printer. But for FDM printer it has to be sized, because…
Multiple Exposures XP2 Calibration Test for printers that can do multiple times.
Raspberry Pi5 case with the cpu cooler fully exposed
Holds upto 4 board markers and an eraser
Expo Marker Clip This is a magnetable clip for holding Expo markers. Print it out, slap some sugru or superglue in the hole in the back along with a maget, clip your markers in, and BAM! You've got yourself a Magnetable Expo Marker Clip.…
Designed to clip on rail from below first, then other side from top so they counter act and less likely to pop off; a sort of clip twist. Light can be clipped in before or after mounting to saddle. Should clamp opening should point…
Made for my Exposure Lights Diablo light - fits Joystick too I think - to mount on my Specialized out front mount GoPro adaptor. It's a good snap fit but includes tabs in case one wishes to double up with an o-ring. Print Settings Printer…
Exposed the magnets so they can be inserted after printing.
Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.
Stores 5 fine Expo Markers, Eraser, and Spray. Can sit at a table or be wall mounted. Prints in about 3.5 hours.
Este es un broquero o expositor de brocas pensado para brocas de avellanado, ya que va desde Ø5mm a Ø13mm que dentro de las brocas “pequeñas” son las más utilizadas en avellanados con broca. Cada agujero tiene más holgura por si acaso el…
Just a simple magnetic marker holder. I used two 6x3 magnets. They fit in pretty well and are snug, but I still used a small dab of super glue on both. I also found it has more strength when printed vertically. I did not need supports or…
This is an alternative case for the TeensyROM cartridge for the Commodore 64. It's designed to be easy to print (no supports), leaving some of the cartridge's larger components “exposed” through cutouts in the case. Significant…
I recommend to use the *.3mf File to get a very lightweight knive (~10 g including blade). This is a quick and dirty remix done using the STLs and the cut tool of prusa slicer. Two of the pictures show the model with less exposed blade…
Un présentoir à carte de visite, portable et déployable, avec réserve de carte. A portable stand with card reserve and deployable
This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look…
Remix with gaps for all ports and a mirrored mounting plate option. See original model https://www.printables.com/model/705053-mountable-esp32-screen-cyd-case-with-pen-holder for instructions. All credit to @Sijeveenstra_996957 for the…
Print the part face down for the best results! Please consider subscribing to the YouTube channel!
Especial para colocar las 13 figuras de la coleccion Harry Potter
Use 4xM3*4 heat inserts and 4xM3*8 counter sink screws for assemble. Freecad design file included incase you need to make your own change. Updated: V2 version extended the edge by 1.5 mm so that TF card can be protected by the case.You…
criei este suporte para colocar minhas miniaturas em exposição.
This is a marker holder for a white board the markers fit perfectly in side it and make a nice pop noise when you pull them out. There are some magnet holes on the back if you end up using different magnets you may need to make the hole…
No supports are needed, and easy to print design. Very simple x4 expo marker holder that I designed. I designed this around the normal-size expo markers, and nothing else. The magnets that I had come from harbor freight in the household…
This an exposed head for the dummy 13, it has a skull, spine, tounge, and teeth
Expobar Brewtus Tamper station E61 for inclined portafilter UPDATE: Added a bottom and tamper holder in version 2 This is a tamper station for the original portafilter that is coming as standard for the Expobar Brewtus series of espresso…
Simplifying my previous mount : this one is cleaner but works just as well if not better. Two included: An offset mount that still allows printing without supports but moves the light away from bars. Perpendicular like a normal mount.…
An expo marker holder for IKEA skadis. Category: Office
I wanted to model a custom wall plate. I based mine on Alexhart's. This is a simple, chamfered wall plate - The important difference here is I'm including a Fusion 360 export file should you want to make your own custom GFCI outlet wall…
No supports are needed, and easy to print design. Very simple x4 SMALL expo marker holder that I designed. I designed this around the small-size expo markers, and nothing else. The magnets that I had come from harbor freight in the…
Caja apilable para exposición de Hotweels. Tiene ranura en la parte trasera para colocar tarjeta recortada. Las medidas de la tarjeta recortada son de 108mm (ancho) x 46mm (largo). Se han añadido conectores para unir las columnas.
Magnetic mount to store 4 of your Expo dry erase markers to most dry erase boards. I used 8 - 5mm x 5mm cylindrical magnets that are embedded in the print, just add a pause right before the holes close up. The hole itself printed at 5.1mm…
Wanted small(est) AirTag enclosure that doesn't expose it. You can add your logo or text on the enclosure (best to put it on bottom, so it will keep stable orientation regardless how hard you close the top cap). Fusion source file is…
Just center your test model on each placing square and delete the layout helper. Added a second version that helps to lift all models in one go. I've also included the “M3 8x layout.scad” OpenScad file for tuning for another printers,…
Thanks @SpeedyBP for the Fusion file :) I was too lazy to do all the labeling / text changes in a manuel process. So i played a bit around with a python script. Update: unfortunatelly i lost it :( If you have a list of needed names sent…
This is an adapter to mount the Exposure rear light on a Specialized saddle using the SWAT™ brass mounts. It keeps the light higher than mounting on the seatpost and is probable more aerodynamic. I mounted it on a Specialized Power Pro…
Daughter got the Our Generation school and needed a dry erase eraser. I glued on gray felt using E6000. Wait at least 24 hours for glue to set. Use this glue and of course heat your PLA in a well ventilated area. Follow instructions for…
Company logo of the fictional company "Universal Exports". Known from the James Bond Movies. With multi-color printing, the filament must be changed after each color.
An expo marker that holds them at a downward incline to keep ink concentrated in the tips, making them last longer! Holes for magnets in the back, I think I got them here: http://www.kjmagnetics.com/proddetail.asp?prod=D86 It was awhile…
PLA CF provides a nice finish and seems good enough but PLA tough might be best.
This is a magnetic caddy made to fit two chisel-tip Expo makers. It's perfect for metal whiteboards or refrigerators! The openings will fit markers a little larger than the original Expos, so they should be compatible with other brands as…
Replacements for lost or broken bass drum spur feet and nuts. Modeled from scratch using a set from a Pearl Export bass drum. Fits: Pearl Export-style bass drum spurs with M10x1.5 threads. Files: Bass Spur Foot.stl : spur foot Bass Spur…
Here's a minor mod for the R2D2 hexport disk to make it the same as the original blueprints and the films. The parts here fit straight over the Mr Baddeley HexBasex2.stl. No modifications needed. The hard work (research and measurements)…
This is a holder for a 4-pack of the small expo markers. A magnetic strip/tape of at least .5 mm is to be applied to the back to stick to surfaces such as a refrigerator. And yes I know that the f3d file has warnings. Thingiverse:…
STEP file for Jacob Williams "Unofficial XRP Kit CAD" OnShape model (06/20/2024)
This is a simple clip to hang expo markers. The print can be paused at the halfway point to insert a 0.315" diameter x 0.118" height magnet for a seamless look. Magnets:…
Remix of lightninglord88 fan duct ( https://www.thingiverse.com/thing:4816138 ) with the part than covers the manual feed gear removed (crudely) in maya. STL export broken for me so its an OBJ but should import fine. Cura was fusing the…
Expositor hot wheels para panel ikea skadis. Impresión sencilla, rápida y sin soportes. Clonar archivo enganche X2.
This is a multiboard compatible expo marker holder. It is designed to hold 5 markers. I printed in petg with a 0.16mm layer height, but I'm sure it can be printed with a variety of settings and materials. Support is recommended for the…
Printing Instructions Profile: Higher quality profile recommended due to the small size of the prints. Supports Needed: I printed with base plate supports to ensure the magnet holes were clean. If you have faith in your printers bridging…
Please click ❤LIKE❤ if you appreciate my work 😊 Flexi Demon Hand – Articulated Skeleton Hand with Exposed Bone A creepy flexi demon hand with articulated fingers, skeletal details and a distinctive exposed bone extending from the wrist.…
Expositor para mecheros clipper de 4 unidades, que suelen ser las colecciones.
