1 / 1
Resin Exposure Finder for Anycubic Photon M3 Plus — image 1

Resin Exposure Finder for Anycubic Photon M3 Plus

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

8-up copy of the Photonsters Resin Exposure Test v2 arranged and labeled for use with the Anycubic Photon M3 Plus.

Rating
5 / 5
Likes
32
Downloads
600
Makes
4
Views
2,717
Reviews
1

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Public Domain

This STL is an 8-up copy of the Photonsters Resin Exposure Test v2 arranged for use with the Anycubic Photon M3 Plus.  

Here's what I've done:

  • Subdivided the 197mm x 122mm build platform into 8 equal sections
  • Scaled the original STL by 95% so it would fit within the sections created
  • Place the test model into the center of each of the 8 sections
  • Added raised numbers to match the order used in the test model Anycubic has provided for the M3 Max (currently, the only M3 printer with an R_E_R_F file from Anycubic)

To the best of my knowledge, the currently-available 2.x series firmware for the M3 Plus does not support automatically ramping exposure times when presented with a file named “R_E_R_F.<something>”.  Based on what we've seen with the M3 Max, this functionality will likely be added to the M3 Plus in the 3.x firmware series once that has been made available.

Tags