Resin Exposure Finder for Anycubic Photon M3 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8-up copy of the Photonsters Resin Exposure Test v2 arranged and labeled for use with the Anycubic Photon M3 Plus.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 600
- Wydruki
- 4
- Wyświetlenia
- 2717
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
This STL is an 8-up copy of the Photonsters Resin Exposure Test v2 arranged for use with the Anycubic Photon M3 Plus.
Here's what I've done:
- Subdivided the 197mm x 122mm build platform into 8 equal sections
- Scaled the original STL by 95% so it would fit within the sections created
- Place the test model into the center of each of the 8 sections
- Added raised numbers to match the order used in the test model Anycubic has provided for the M3 Max (currently, the only M3 printer with an R_E_R_F file from Anycubic)
To the best of my knowledge, the currently-available 2.x series firmware for the M3 Plus does not support automatically ramping exposure times when presented with a file named “R_E_R_F.<something>”. Based on what we've seen with the M3 Max, this functionality will likely be added to the M3 Plus in the 3.x firmware series once that has been made available.