Paracord endcap for zippers and other uses - 2× ø2mm or 1× ø4mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
clips onto the end of cords - no knots, tools or extra parts needed
- Ocena
- 4,667 / 5
- Polubienia
- 156
- Pobrania
- 596
- Wydruki
- 8
- Wyświetlenia
- 2611
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent.
Also works for a single ø4mm end.
- no knots
- no tools
- no extra parts
- no support geometry
This print is tested with and developed for 0.25mm nozzles.
Changelog
| Paracord End Cap | ||
|---|---|---|
| 2022-06-08 | v0.4 | initial public release |
BOM
- housing
- retainer
Assembly
Prepare the paracord ends with melting to keep them from fraying, and to ease threading through the end cap eyes. Keep the melted part as small as possible!
Threading the loop end through the holes makes assembly easier. Using an iron wire also helps.
Production
Use a 0.25mm nozzle, the parts are tiny! Print quality will be better if you print several pairs - layer cooling time is too short if you only print one.
Tested with ABS and PETG.
Alternatives
![]() | ![]() | ![]() |
| Dangletag, customizeable tiny name tag for two ø2mm paracord ends | quick Paracord rope clamp 4mm & thimble | Paracord thimble and rope clamp |
Development
Please comment if something can be improved, or if it works for you. Also, don't forget to share makes and application examples!


