Liczymy pasujące modele…
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Handles for Skånska Byggvaror Outdoor parts Intended to sit on the inside of lot with fitted outside original handle. With the handle, you get a grip to push the part from the inside. The handle does not prevent the parts from being…
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
“Take your wine camping, on a picnic, or to a festival. These lightweight, nesting wine glasses go anywhere with their unique stem design that unscrews and allows the bases to be compactly snapped into the bowls for storage. Super…
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
I wanted to bring new life into a Outdoor Christmas Wreath I had. So I created this clip to allow for the replacement of dumb lights that it came with to be powered by WLED.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Woodford Model 17 Sillcock handle. Included the .blend file. Category: Replacement Parts
I need a way to hang outdoor Harbor Freight LED Lights on my covered porch. The lights in question: https://www.harborfreight.com/24-ft-led-outdoor-string-lights-white-70990.html ( LUMINAR OUTDOOR 24 ft. LED Outdoor String Lights) I made…
U7 Outdoor mount using the pole mounting hardware. Hardware 2 x #6 size screws Printing Print in ASA or PETG for durability and UV resistance. Install Details The screw holes are 35mm apart from each other.
Print Your Own Backyard Classic – No Hardware Needed! This fully 3D printable Ladder Toss frame is the perfect addition to your summer fun lineup. Designed with an easy snap-fit system , it requires no screws, glue, or tools —just print…
Gutter Bracket for Outdoor Lighting; fits most standard outdoor lighting fixtures with optional 2.5" riser. Lights can fasten directly to the mount or to the riser that is then attached to the mount. The gutter mount has a built in spacer…
Smaller dome mount for outdoor lighting fixtures with diameter of 22.5mm . Print using ASA. Mount is approximately 2.5" in overall diameter. No supports if printed with threaded end facing build plate. 4 wall loops suggested, 0.18 layer…
This is my second version of a projector mount utilizing ~21.5mm PVC pipe meant for outdoor use. This version is stronger, more stable, and more versatile in terms of the ground you place it on. I've only tested with the VANKYO…
Outdoor IP camera case that protects against bad weather. Cover size 152 x 140 x 220 mm. Fastening with 3 screws. Recommended material PETG.
This is the first Sentry 10v on printables! it if fully printable. Credits to @JustPinkForNow for his part of the model. INSTRUCTIONS: Print 4 of the big horns and 4 of the small horns. Print all the other parts. get a motor with a shaft…
Pls test the fit for the Antenna. Screws where glued in with super glue
This frame was designed as a custom solution to hang a FOR SALE sign that is 8" x 12". I printed it out of PCTG to also test if it could truly hold up to the elements better than PETG. It does not require supports, the lip function as the…
About This is a customizable / generic solar radiation shield for temperature sensors. By printing one roof and however many 15mm tall main body pieces are needed you can hold whatever height sensor you need. Instead of being specific to…
What's this thing for? This part allows you to secure Govee Outdoor Lights Pro to your housing using two screws. I had good luck with gutter screws, which conveniently are available in white. Why is the 'u'-shaped part where the cable…
Simple mount and rain cover for zigbee outdoor temp/humidity sensor. The sensor itself claims that it's waterproof, but I wanted to be save. This box also makes mounting and changing batteries easier, just use sticky tape on the back…
I made this top handle for the xiaomi sound outdoor for people who want to caryy their speaker. Easy to print. Print with supports (preferably Tree) Roughly 150g of filament Roughly 5-7 hours of print time. If you want You can support me…
I guess most materials except PLA is fine to use, I made mine in brass colored ABS. Lamp "glass" made from some kind of transparent/clear filament. I made mine in PETG (since I already had that one in house but it might be better with a…
3mf file has all required settings for printing with PLA Silk filament.
This bird house will hold a Blink Outdoor 3 camera allowing you to capture any winged visitors you may have during the various seasons. Please print in appropriate material etc as the sun can warp PLA. Put together using a mixture of…
This 3D printed pipe holder is designed specifically for the AirGradient Outdoor O-1PST sensor and allows secure mounting on a 28 mm diameter pipe . For outdoor durability, printing in ASA is strongly recommended due to its UV resistance…
An outdoor/indoor solar powered RAKwireless meshtastic node enclosure. Compatible with any 1/4-20 Camera mount. Screw-off hardware-less base allows for easy maintenance access. Will continue to update as needed to resolve any issues or…
Print in TPU so it is soft and flexible like a normal gasket would be. My original one cracked and my spigot was leaking from the top so I unscrewed it and found a simple little gasket so I created this from the original. There is both a…
This is a concrete mold for an outdoor candle with a continuous wick. The mold parts should be coated with release wax or release oil before casting. Olive oil can also be used for this purpose. To hold the mold in place, I used a 40 × 40…
📦 Ajax Systems Wall Mount Adapters MotionDetect Corner Adapter + MotionCam Outdoor 45° Wall Mount 🧩 Overview This upload contains three custom mount adapters designed for Ajax Systems detectors: 1 MotionDetect Corner Adapter Angled corner…
This holder hangs on the door of your printer (note: you can't close the door completely when installed)
these filtered LNA devices are more effective if they're on the antenna side of your feed line.. but the uputronics devices are not suited to be outside so I designed this simple enclosure. Printed in ASA for maximum UV protection. It…
This is an outlet cover I made for our house, which is part of one of those contractor-built neighborhoods. I suspect this is a pretty standard outlet box. This one does not snap with the latch, which is intentional as the previous one…
I made these to cover the Govee lights to paint them. Initially I also designed the track but realized it would be a huge waste of time to 3D print the track myself when there are plenty of cheaper options online. The ones I am using are…
FOREWORD We recently moved into a house that had these metal pathway lights surrounding our pool deck. Well, over the years, a few may have been launched into the lawn from the snowblower.... or possibly hit with the lawnmower after a dog…
An HO scale 1:87 outdoor wood furnace to keep your model homes heated. larger chimney version should print better on FDM printer Category: Models
A simple broad parabolic reflector for Meshtastic 915 or 868 MHz. This has been tested with the Alfa 915 N Connector antenna and has minimal impact on SWR. Front to back gain is around 15 dB with almost no difference in signal strength…
🌿 Smart Soil Sensor Enclosure (ESP32 + v2 Sensor) - latest v2 model published Tired of manually checking your lawn? This is a rugged, outdoor-ready enclosure designed for an ESP32 USB-C board and a v2 Soil Moisture Sensor . It’s the…
This is a outdoor box with a smooth lid the lid is really secure you can print 2 more parts to put in the 2 slots it to separate things. Bigger version is COMING SOON If you want it bigger right now you can always scale it in a slicer or…
🐾 3D‑Printed “On Duty” Dog Sign – Outdoor Ready This 3D‑printed “On Duty” sign is a bold and stylish way to indicate the presence of a dog on your property. Designed with clean lines and a strong silhouette, it brings both functionality…
Use an M5×10 screw to mount the holder onto the L-profile, and M2×12 screws to connect the radiation shield to the holder. Print with white PETG filament.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) GOLF TEES (MANY SIZES) ⛳…
I was mildly annoyed because Donic's support didn't answer my request for replacement parts. So I measured, designed and printed it. Here's what you can replace: - Part 3.4 (works on both sides) - Part 3.2 (left side only, need's to be…
Shelf for e.g. outdoor shower to store shampoo and soap. Dimensions: 125mm x 160mm x 75mm (Height x Width x Depth) designed to fix with 4 pcs., max. 3,5mm diameter countersunk screws
Restore worn or damaged patio armrests with this simple and effective Armrest Repair Cover. Designed to slide over the corner, it neatly hides imperfections while protecting the surface from further wear. Its angled, minimalist shape…
Ich habe mein Glasfaser-Heimnetz mit einen Fritz!Repeater 6000 ergänzt, der von März bis November im Garten das Signal verstärken soll. Zum Schutz und Befestigung habe ich dieses Gehäuse entworfen und auf dem MK4s aus PLA gedruckt. PLA…
Shell and lens grid to have a stealth G100 camera filming outside. Adjust the grid to avoid obstructing the infrared LEDs Put an elastic band around the G100 before putting on the shell to hold it in place Paint the shell (for example…
Make sure that your couch looks roughly the same on the underside. About 62x39x40 mm on the outside and the inside smaller diameter is about 29 mm. About 5 mm thick. The clip can be hard to bend but it should be that way. Can be printed…
A paralette with 10 rounded spikes for a strong hold when doing outdoor workouts on grass/dirt/soft underground. (eg. the backyard, forest, park) Printing Infill: 15-30% Layer-height: 0.2mm Supports: yes Remix of:
Prusament Spool Sunflower: For the Prusament Spool Upcycling Contest I thought to make a design that can be adaptable. My idea is a Prusament Spool Sunflower that can be a Wall Mount Clock or an Outdoor Windmill. The Hexagons on the…
This is an outdoor bottle sink, that uses your water bottle to have water, and your hand pressure to pump it out! Ever wanted a sink outside, but you forgot to buy that one specific hose from The Home Depot? Well cry over spilled milk no…
This housing is sized for Acurite outdoor temperature transmitters. I printed this in white ASA for UV resistance and minimal solar heating. The module is held inside by a 50mm M3 screw inserted in the base. An M3 heat set insert is…
Turn your old plastic bags into a fun parachute for this paratrooper soldier! The model creates an entertaining outdoor toy for kids. , it requires supports for optimal results. For best durability, print with 45%–55% infill using PLA or…
I was looking for a dehydrator that would reach 70C (158F) that was larger than other dryers. I considered a specific 3d print dryer but most of them only hold one roll and reach 65C. I have been wanting to print ABS and with my AMS Pro 2…
Purpose: This outdoor trash bin clip is designed to keep the lid slightly propped open to improve airflow inside the container. Better ventilation helps moisture escape so the contents dry out faster, which can reduce bad odors and make…
A simple enclosure for an ESP32 and a keystone jack with a bracket to mount on a 1/2 Pipe printed out of Polymaker ASA. with supports
So I keep this camera in my garage, sitting on top of the water heater. The normal stand plus right-angle adapter doesn't quite allow it to angle down and still sit properly, especially with the extended battery pack. Plus whenever it is…
Safety Notice Always ensure that the outdoor unit is securely attached to the steel cable provided by the manufacturer. This is a critical safety feature to prevent the unit from falling. This model is a custom-designed support foot for…
This is a holder to attach your outdoor ultrasonic sensor JSN-SR04T to a SolarEdge / KEBA EV charger. I use this to detect whether my car stands in front of the garage and if so, to block opening / closing the garage door. This prevents…
After some time under intensive sunlight original holder was decimated. Should fit any thermometer with 18mm diameter glass tube. Note: originally parts were white, but they yellowed under the sun. Print settings Use most ultraviolet and…
A drink holder for an Intex XTR Pool that fits most large tumblers, beer bottles and coffee cups. If you don't have the exact pool, you might just want to truncate the base model and test it out at different scales before printing the…
This fitting clips into the hole on the bottom of my Pioneer mini split and holds the drain tube on the outdoor unit. The little plastic fitting it came with broke, so I made a new version to 3D print.
Bracket for Eufy outdoor lights, remixed to add screw holes. Holes are intended for #6 wood screws. Prints fine without supports for me. See…
I decided to keep it simple ... well, I can only keep it simple with my limited Fusion360 skills ;) The solar panel will be connected with 2 zip ties to the corner mount. The corner mount will be screwed onto the corner. The screw holes…
This bracket uses 2: #8 screws to mount it to the wall or surface of your choosing. Made for mounting Wyze Outdoor plug. You MUST remove the rubber outlet covers for this to fit properly. STL, F3D, and STEP Files included. Screw hole…
Did you install the Govee Permanent Outdoor lights only to discover that you're being blinded through your window? Well, here's the fix for that. This model can completely black out individual lights, or work as a diffuser. It all depends…
This is a replacement clip for TK Classics outdoor furniture. The originals cost $50 for a pack of ten which seems expensive. This one fits Laguna chairs & sofas perfectly. They are slightly looser on Barbados chairs, just like the…
Some remixed parts for xiaomi outdoor camera to fit into pipes.
Replacement diffuser (shade) for Costco Outdoor LED Wall Lantern. I printed it using transparent PETG so I can change the color of the diffuser when I want. Link to Costco Outdoor LED Wall Lantern
la hauteur est de 100 mm l'entraxe des vis est de 45 mm le diamètre des vis est de 3.5 mm n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
Intro This Micro Medical Kit is a tiny but thoughtfully designed first-aid container for everyday adventures. Whether you’re hiking, camping, traveling, or out with kids, it gives you a minimal emergency backup without taking up space.…
Housing for 12v power supply with UPS option. Printed from PLA by Prusa.
Handle for pulling the rope on our outdoor clothes dryer. Ersatzgriff für unsere Leifheit Wäschespinne, da der alte nach Jahren zerbröselt ist. The model from the picture is the normal one.
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
This is my attempt at making a water resistant housing for the Eufy Door/Window Sensor, so it can be mounted externally to things like gates and shed doors. I don't recall the o-ring size required, but you need 2 o-rings per housing - you…
I have designed the following bracket for ceiling mounting the “Reolink E1 Outdoor POE”. There is space for the network cable in the lower part. I have created 2 versions. One version with side entry for the network cable. The second…
https://www.ebay.com.au/itm/235237313141?var=535262646637
If you want to use the lights while there is still daylight, you need to block the light from hitting the solar panel
I ordered these track lights from Aliexpress as a kit, sadly they didn't come with endcaps so I designed some up. One is just for closing off the end, the other has a hole for wiring. This is the kit I ordered:…
Had some left over eufy outdoor light strips - didn't want to use the adhesive for the ceiling, so I made a clip to snap to the drop ceiling rails. Edit-slight update to add fillets that were missed.
Description: Wall lamp thing to be used with common lamp holder. Easily mounted and assembled, has enough space for wiring. Probably better to coat in spray paint to save it from UV light. Instructions: Case, Base and Lid models need some…
Oudoor sensor housing for temperature and humidity sensor. BOM 6x M4 ISO 4762 / DIN 912 10mm 2x M4 threaded insert (https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs)
Handles for Skånska Byggvaror Outdoor parts Intended to sit on the inside of lot with fitted outside original handle. With the handle, you get a grip to push the part from the inside. The handle does not prevent the parts from being…
The design makes use of the existing Blink camera bracket and the supplied screws. There is a curved cavity so a large cable tie can be passed through it and around a UK standard downpipe. Downpipe external diameter: 69 mm Cable tie…
I made this for an Aqara temperature/humidity/pressure sensor but any other may work. It is not rain proof, but adds some protection against rain on windy days under the eaves. The bigger battery is a must in cold winters. Made a hole on…
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
I finally got around to putting new vinyl siding on my garage and could not bring myself to make holes in it with screws so I whipped these up so i could re-hang my garage decorations. They have a surprisingly good grip & are super-simple…
The bulb hanger is backwards and works in the opposite direction than I want/need - so I designed a cap to super glue to the top of it. Because these hangers are one direction, they can only be run from right to left, not left to right.…
FOR PROMPT SERVICE, BLOW ME, SIGN From the classic John Candy film, The Great Outdoors. Category: Signs & Logos
I lost the stock magnetic mounting plate for my Google Nest outdoor security camera, so I decided to make my own enclosure to keep the camera upright. Tolerances are very tight, so you may want to scale up the size slightly if your…
I made this cable clip to help manage an ethernet cable to my exterior cameras. It slides on to the bottom of common house sidings and holds snugly. opening is 10.5mm at the narrowest and 13mm at the widest. This should allow some play in…
This case uses an inlay for Sonoff ZBminiL2 with or without relay. Im working on more options for placing modules in this case, for example ESP8266 The case is water-protected (IP44).
