Outdoor socket rain cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an extra rain cover for outdoor mains sockets and switches (which are usually already IP44 rated).
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 868
- Wydruki
- 6
- Wyświetlenia
- 3611
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an extra rain cover for outdoor mains sockets and switches (which are usually already IP44 rated).
Print Settings
Printer:
RepRap Mendel
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
15
Notes:
UV-resistant filament is preferrable
Just print it and screw it to the wall using a pair of screws. Use an outdoor UV-resistant silicone sealant between the wall and the cover.
In the case if your plastic is not UV-resistant, paint it with some UV-resistant paint before attaching to the wall.
In my case, when I printed the socket cover with ABS, and used it unpainted, it survived for only 1 year (it become brittle, and finally desintegrated). After printing the cover with the same plastic and covering with acrylic UV-resistant paint, it stays ok for more than 2 years.
Category: Outdoor & Garden