Undersill Compatible Govee Outdoor Pro Light Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful to create your own "track" for the wiring of the Govee Outdoor Pro Lights from vinyl undersill.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 1537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I do not believe there is a way to get the wires of the lights mounted in a way that will look good that won't eventually sag. The premade track options are expensive and not very flexible. Undersill trim is relatively inexpensive and can be cut to hide the wire sections between the lights.
This is the undersill trim I used. https://www.menards.com/main/building-materials/siding/siding-trims/abtco-reg-10-undersill-trim/vtutb01/p-1444437157335-c-1495119088651.htm?exp=false
I used a table saw to cut off the nail strip. A miter saw will cut the lengths needed, but must be cut slowly so it doesn't chip away.
I added a mounting template block. That held the clip in pace so I could press it against the wall while I had the clip, light, and trim piece in place. The tape helped secure it while I screwed in the light mount. I included a STEP file so the distance could be changed easily. I wouldn't go any closer than what I did.
Gable mount version is here: https://www.printables.com/model/1452672-undersill-compatible-govee-outdoor-pro-light-gable