Liczymy pasujące modele…
I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
Slides over lights mounted on the soffit with the 3M tape. Secures by covering the wire on both sides
Adapter with support base to the Govee or similar shaped Hygrometer and Thermometer. With this hygrometer/thermometer you can monitor the temperature and humidity inside ACE pro remotely via Bluetooth, receive notifications for changes,…
This is a model that combines the govee rgbic tv lights with The multifunctional Adjustable desk mount for betting mounting options. This was designed to to use with a corsair xeneon flex monitor.
Govee Holder to any Pole with a diameter for 16mm (mine is pretty Tight). Printed in ASA!
What's this thing for? This part allows you to secure Govee Outdoor Lights Pro to your housing using two screws. I had good luck with gutter screws, which conveniently are available in white. Why is the 'u'-shaped part where the cable…
I tweaked the spacing to work with my Govee Curtain Pros. It's pretty close to the right spacing.....
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
I created that for Govee RGB Light Bar ambient lighting effect, you need to create 2 arms. I used M5x16 for the connection of the parts. You can change that what you have in your hand. You will also need double sided tape to connect the…
I created that for Govee RGB Light Bar ambient lighting effect; you need to create 2 arms. I used M5x16 for the connection of the parts. You can change that what you have in your hand. You will also need double sided tape to connect the…
I made these to cover the Govee lights to paint them. Initially I also designed the track but realized it would be a huge waste of time to 3D print the track myself when there are plenty of cheaper options online. The ones I am using are…
A little latching, swinging box I designed for the power brick that came with my "Govee Permanent Outdoor Lights 2" set so I could mount it outside and paint to be less unattractive. I made this as a parametric Fusion 360 design and…
Description: This is a remix of user_483412304 's original model. It is a base shroud with a built-in switch box holder for the Govee Floor Lamp. I have resized the screw holes to 4.6mm to work with M3 self-tapping screws, and I added a…
This is a Mount for the Goove TV Backlight 3 Lite Its for the TCL Q7C, 50 Inch, but i think it should also fit bigger versions. Just a bit of support needed for printing and a bit of double-sided tape to fix it in place on the TV.
My Govee TV Backlight 3 camera somehow was knocked off the TV and the counterweight hinge broke. This bracket holds it on top of my LG C4 TV. The fit is not 100% perfect, the angles of the flat part on the bottom and the camera shaft…
Instead of sticking them on the ceiling, I lined up the Govee string ligthts on a shelf facing up. But since i wanted hide as much as a can the direct shine on the ceiling i tilted the lights, tried different angles. I put 2 sided glue to…
Did you install the Govee Permanent Outdoor lights only to discover that you're being blinded through your window? Well, here's the fix for that. This model can completely black out individual lights, or work as a diffuser. It all depends…
This model has a solid side - the user can print the file with NO top or bottom layers - this will expose the infill of your choosing, thus using less filament and giving it a cool look. Recommend using a 25% Infill w/ Tri-hex infill.
Quick mount I made for the T3 camera on top of A2 oled. Used double sided tape to back of tv to mount. Keeps it from moving around.
Wife wanted the Govee Permanent Holiday Lights to look like old school C9 bulb strings, so I added a C9 holiday light bulb shaped diffuser to the mounting bracket, positioned so it gets fully illuminated by the bulb but does not disrupt…
Desk mount for the Govee Flow Pro LED Light Bar. Designed to be compatible with the autonomous desk system.
A simple solution to fill the Space in between your Govee Glide Hexa Panels :) Ive put them with 3M Tape on my Wall. Included some sizes to fit your needs. Feel free to share your Makes.
I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…
This tool is for the Govee Permanent Outdoor Lights Pro installation. It is an installation tool for VisualReversal 's (Printables website) friction grip mounting brackets. It mounts them at a Govee-recommended distance of 8 cm or 3-1/4…
This mount is designed for seamless installation of the Govee RGBICWW Light Bars using a standard 100×100 VESA pattern. It provides a sturdy and practical solution for integrating light bars with your monitor setup. Key Features: Easy…
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
This is a holder for a remote that comes with a Govee floor lamp 2. (Model H607C). The same remote might be used for other Govee products. I printed one X1C with textured PEI Plate with Polymaker Polyterra white and used automatic tree…
Suitable for the Govee Life hygrometer https://amzn.eu/d/fQFeHqy
Brackets for Govee H706C Permanent Outdoor Lights Pro Remix of https://www.printables.com/@Gelap https://www.printables.com/model/630613-govee-permanent-outdoor-lights-pro-mounting-bracke
This is a bracket to be able to mount a light at the top center of a roof gable. It doesn't matter the pitch of your roof. You need to print 2 of the “gable mount 2” file. Outside of that it is pretty straight forward. I used #8 1/2"…
Slight modification to the narrow mount introduced by Gelap with removal of two of the corners so there are only two mounting holes. Added two alternative versions for mounting the junction between light strings. One with just a single…
This is a bracket to hold Govee permanent Christmas lights (non-pro). I cut it shorter to use less plastic.
This is a spacer that separates 2 strands of Govee curtain lights. I printed multiple sections of jeepin95's original 4-strand model (transparent PLA), and wanted to join them together. No changes to the original except it's cut in half.
Reinforced Skadis Mount for Govee Floor Lamp
Needed some consistent spacing but also needed the ability to put some lights in locations I didn't have easy ladder access to so adding on some features to help hold the light in place, and attach to a broom handle to reach those spots.…
I wanted a mount that could be painted to match the eaves, conceal the wiring in plastic wiremold/raceway. and protect the LED module. Other mounts I found were only designed to clamp the LED module by the wire. I printed these parts in…
Slides over lights mounted on the soffit with the 3M tape. Secures by covering the wire on both sides
This model replicates the clip that comes with the Govee LED outdoor strip. It will likely work with other brands as well. I printed with: 0.2 mm layer height no supports needed if print on the side as shown in the 3mf Probably best to…
I created this simple model to make mounting the Govee Outdoor Lights 2 easier to mount. I attempted to use the provided mounts and screws but the screws wouldn't hold and the tedious nature made me think there must be a way to use a brad…
These clips are included with the Govee icicle lights, but I don't imagine they will last many seasons (especially in Arizona sun). Rather than order a bunch from Govee I figured I'd model one and print some in ASA.
Gelap has made a great assortment of mounts for the Govee Permanent Outdoor Lights Pro kit. After installing them, I found a need for a few extra accessories to clean up my install. // UPDATE DEC 2025 Added my 4" x 8" approx. S Curve that…
Govee Permanent Outdoor Lights Pro 2 Mounts If your home is like mine, your soffits require a bridge at specific intervals. This model creates a secure bridge mount with the security benefit of hiding screws behind the cap with a snap…
Vesa mount for Govee TV backlight 3 lite. Used M8 (28 mm long) bolt to fix into the TV.
A button for pressing the switch on a govee floor lamp that has been tucked behind a skadis peg board. Place the button in a peg hole and then slide the button in behind it.
This is a mount for LG OLED TVs (tested on a 55" C4 and a 65" C3) for the Govee DreamView camera. No need to use the adhesive directly on your TV.
Print it standing vertically. supports needed on the plate.
This allows me to use some random suction cups I had on hand to stick the wireless sensors to the inside of a reptile enclosure. I doubt this will be a direct fit for many suction cups due to the wide variation of suction cup ends, but…
Govee LED TV EYE Backlight Stand for Slim TVs. Secure mount, no backlight obstruction. small amount of double sided tape and goes over the lights and stays secure. Printed in PLA at 25% infill on its side long ways up, no supports came…
I wanted a way to keep the bottom of my curtain lights from moving around in the wind. These pieces hold four 6x3mm magnets and have a slot that the included spaces fit right into.
Govee H706A Permanent Outdoor Lights Pro Mount Bracket I’ve designed two versions of this mount: A side-mount version A narrow-edge version requires just 1.5 inches of space. Both versions are designed with #8 self-tapping screws. I…
3D-Printed Holder for Govee Outdoor String Lights 2 This custom-designed holder is specifically crafted for Govee Outdoor String Lights 2, providing a stable and practical solution for secure mounting. Engineered for simplicity and…
made more material by the screw hole to stop breakage
Govee Curtain Light Minimalist Brackets These minimalist brackets are designed to be printed in PETG or other strong, UV-resistant material and are modelled for self-tapping 8x1 lath screws. Printing Notes: - If you like clean prints,…
Print Settings (Should be in 3mf project file): Material: PETG - PLA will stress fracture over time and PETG hinges more nicely Layer Ht: 0.3 mm Perimeters: 3 Top Solid Layers: 6 - Helps with waviness from the default 4, purely aesthetic…
Replacement mounting plate designed for Govee Triangle (H6067) and Hexagon (H6061) Glide light panels. It may be compatible with other panels, but compatibility has only been tested with the H6067 and H6061 models. I printed them with…
Mount for the Govee curtain. I did not like the one that came with the curtain lights so I made my own.
Govee Floor Lamp Skadis Mount but not End-to-End
One of my children installed Govee strip lights, a ribbon of RGB LEDs with “segmented color control” in their bedroom, and found that the glare from the LEDs where they were directly visible was distracting. They asked me to come up with…
The Govee gable mount is a must to secure your govee pro lights to the peak of the soffit and keep the light centered for a better more professional look. PETG, ABS, ASA recommended 0.2mm Layer Height 2 Walls 10-15% Infill Supports needed…
This mount is for the NON-PRO Govee lights. The Govee gable mount is a must to secure your Govee lights to the peak of the soffit and keep the light centered for a better more professional look. Recommend printing in PETG, ASA, or ABS.…
I think the original desing is great, but since my desk is so close to a wall, lightbars pointing directly to the wall are giving less light than they could. So I added possibility to adjust them vertically. In addition I needed one that…
Flat mounting clip that fits the Govee Ground Lights 2 (Model 7052 and 7053). It snaps onto the lights just like the ground stakes do and allows for additional mounting options instead of just the stakes in the ground. I printed it with…
This is a govee wall mount. It is used when there isnt a soffet to mount the lights on. it can also be used to mount the light to fences or around handrails or the bottom of decks. There are 4 different sizes 3 inch, 2 inch, 1 inch, and…
This is a Govee Non-Pro wall mount. It is used when there isnt a soffet to mount the lights on. it can also be used to mount the light to fences or around handrails or the bottom of decks. There are 4 different sizes 3 inch, 2 inch, 1…
Adapter with support base to the Govee or similar shaped Hygrometer and Thermometer. With this hygrometer/thermometer you can monitor the temperature and humidity inside ACE pro remotely via Bluetooth, receive notifications for changes,…
This is a 3 inch wall mounted Govee Pro light bracket. Its the same as my regular wall mount but with ears to attach ½ inch PVC to hide your wires.
I had the Govee Neon Lights mounted under my desk, facing down to give ambient indirect lighting. The clips and adhesives included are entirely insufficient for this use. They are designed and intended to be mounted horizontally on a…
Print in a way that there is no sparse infill Ideally print out of ASA or similar, as other materials would either melt in the sun or degrade with the constant UV light of the sun Submit feature requests here!
This is a Govee Light Alignment tool used to install at the same distance each time. This one set the lights to 5 inches from the wall to the center of the light. If different distances are needed, please let me know and I can get it made…
I needed some parts to mount my lights to my board gaming table which has a al-extrusion profile on it. I printed them vertically and mounted them with M3x6 screws.
This is a wall mount bracket for the Govee H5075 thermometer. It uses two 3M medium command strips to attach to the wall. The strips are hidden behind the thermometer and the bracket has an opening to allow easy for removal of the strips.…
The holes are exactly 5mm so it is a snug fit. Might need some plyers to get the magnets in.
Desk mounted holder for the Govee Floor Lamp. I made it 3 parts for easier printing. You need an M4 flat head bolt and 2 M6 bolts, with ome #4 screws.
Govee Thermometer Hygrometerhalter für die ACE Govee Thermometer Hygrometer Innen, LCD Digital Temperatur luftfeuchtigkeitsmesser mit Benachrichtigungs Alarm, Präzise Thermo-Hygrometer mit APP, Datenspeicherung für Gewächshaus Weinkeller…
I recommend changing the perimeter/wall generator to Arachne, to get rid of impossibly wide fill lines (~0.8mm) in the bottom layer. I needed a bracket for the Govee Desk Neon Strip I bought so it doesn't get damaged by bending too much…
Should be the exact same height and outer bezzle thickness as the Govee Tri LED Panels. (Idea from https://www.printables.com/model/657277-govee-hex-panels-parametric) Created them to glue some moss into them and make it look pretty on…
Needs 2x countersunk Screw for Rigmount is designed for M8 2x M6x30 socket head screw & 2x M6 nut for mounting the light. the design allows for about 30degree of tilt in each direction
This is a model that combines the govee rgbic tv lights with The multifunctional Adjustable desk mount for betting mounting options. This was designed to to use with a corsair xeneon flex monitor.
Gridfinity Govee H5103 Temperture sensor holder and packet holder https://a.co/d/2GO8qUA
This is a clip to hold in Govee light strips in a acustic panel
I didn't like the hanging unkempt look of the Govee lights in our Sojag Genova Gazebo so I came up with some little clips that allow them to me mounted on the interior extrusion. Originally I had intended to run the wires on top of the…
I was looking for a slim wall mount for my Govee H6076 Floor Lamp . I took inspiration from the original model and adapted the mount to suit my needs. To attach the brackets, you need 3 screws with a maximum diameter of 4.5 mm. Please…
The advantages are: - Stable attachment thanks to large adhesive surface. - Sensor is held in place by the clamp construction - Simple, unobtrusive design - Cheap production using PLA
Adjustable guide to assist with alignment/pre-drilling Govee 705 outdoor LED light clips. Requires a ¼" hex bolt with nut. Guide holes are 3.5mm in diameter Clip holes are #8
Mounts above Refrigerator in steel mounting plate. Model in picture was printed with .6mm Nozzle at .3mm Layer height. Required a brim to keep on the plate as it is printed in the same orientation as the picture to avoid surface defects…
Govee Holder to any Pole with a diameter for 16mm (mine is pretty Tight). Printed in ASA!
This clip is designed for Govee Neon LED strips. ✔ Adhesive surface for double-sided tape – easy mounting without drilling ✔ Holds the LED strip securely and neatly on the wall ✔ Minimalist and discreet design ✔ Easy to print
The Govee gable mount is a must to secure your govee pro lights to the peak of the soffit and keep the light centered for a better more professional look. Works with Govee Prism H707A(100ft) & H707B(150ft) & H707C(200ft). Recommend…
I broke one of the mounting clips during the install and needed something to secure the light with a broken tab the only work for Govee Prism Permanent Outdoor Lights H707A(100ft) & H707B(150ft) & H707C(200ft). Recommend printing with…
Dm me for any questions or to request a part for me to make, thank you.
I didn't like the sticky tape for the Govee hex lights, so I designed this mount. it is a tight pressure fit for the Govee Hex lights with multiple points to attach to the wall. Cutouts on each flat face for the connection cables. I…
I do not believe there is a way to get the wires of the lights mounted in a way that will look good that won't eventually sag. The premade track options are expensive and not very flexible. Undersill trim is relatively inexpensive and can…
Modified for the Pro version of the outdoor light and able to accommodate a track of undersill (without the nail strip)
