Govee Floor Lamp Base Shroud (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base shroud for the Govee Floor Lamp with a built-in holder for the switch box.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Description:
This is a remix of user_483412304's original model. It is a base shroud with a built-in switch box holder for the Govee Floor Lamp. I have resized the screw holes to 4.6mm to work with M3 self-tapping screws, and I added a chamfer to the holes to aid in driving the screws in straight while cutting the threads.
Parts Needed:
Two M3x12mm self-tapping screws
Print Settings:
Nozzle Diameter: 0.4mm
Layer Height: 0.2mm
Walls: 3
Top Layers: 3
Bottom Layers: 3
Infill Density: 15%
Infill Pattern: Cross Hatch
Support: Enabled
Support Type: Normal -- Grid
Build Plate: Textured PEI (for a nice, textured top surface finish)
License:
Normally, all of my original models are shared with the GPLv3 open-source license, but this one is shared with the Creative Commons v4.0 Attribution license to respect the license of the original model.