GoVee Curtain Light Minimalist Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The brackets GoVee Provides are big and not very useful in colder climates. These brackets are designed to fix that.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 652
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Govee Curtain Light Minimalist Brackets
These minimalist brackets are designed to be printed in PETG or other strong, UV-resistant material and are modelled for self-tapping 8x1 lath screws.
Printing Notes:
- If you like clean prints, consider a sacrificial layer for screw holes and head offset.
- The hooks have a weird geometry to achieve that satisfying “click” when setting the white plastic leads on the lights. You may need to play with supports or add a breakaway sacrificial layer.
Installation Notes:
The example photo shows that you can use these intermittently or on each light strand -- which is recommended. Also worth noting is that the gap in the photo is an error on my part. I attached the ends without strands for testing.
If you have a garage door like mine that is not flat, it's helpful to employ a laser level and pre-drill for the best results.
Side nodes:
- The photo is of the PLA test prints. It's not a long-term solution, but it's easier and cheaper than PETG for prototyping. If you're in a pinch, this proves it can work in a Canadian winter – but your mileage may vary.
Modification Requests:
I recommend printing a sample to test before committing to a build plate. If these don't work for you, I'm happy to edit the model if detailed info is provided.
BoM
- self-tapping 8x1 lath screws, 1 per bracket
- PETG or other UV-friendly material
- Power drill, or forearms of God and a screwdriver
- Optional: Laser level/level, drill bit for pilot holes
