1 / 5
Govee Permanent Outdoor Lights Pro 2 Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create a secure bridge mount with the security benefit of hiding screws behind a cap with snap fitting.
- Ocena
- 2 / 5
- Polubienia
- 11
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 994
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 14)Remiksy (0)Kolekcje (18)Powiązane
Govee Permanent Outdoor Lights Pro 2 Mounts
If your home is like mine, your soffits require a bridge at specific intervals. This model creates a secure bridge mount with the security benefit of hiding screws behind the cap with a snap fitting.
Build & Install notes:
- If you mount outside, use PETG or your favourite flavour of UV-resistant material
- I added one file on each plate; multiply based on your needs
- On X1C, I left the door open for the PETG; when you have a full build plate, it gets hot in the chamber, which may cause spaghetti errors
- If the cap doesn't fit, rotate it; it is easy to get frustrated up on a 30' ladder when you have the orientation wrong, trust me ;)
- 6 x 3/8 self-tapping soffit screws were adequate for 90% of my installation, but consider having some 8 x 3/8 handy with a drill/bit to pilot hole any gaps
Merry Christmas to every Clark W Griswold installing these bad boys in the snow and freezing rain. Hopefully, these models make your life easier!