1 / 5
Govee Permanent Outdoor Lights Pro 2 Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Create a secure bridge mount with the security benefit of hiding screws behind a cap with snap fitting.
- Rating
- 2 / 5
- Likes
- 11
- Downloads
- 103
- Makes
- 1
- Views
- 1,006
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Govee Permanent Outdoor Lights Pro 2 Mounts
If your home is like mine, your soffits require a bridge at specific intervals. This model creates a secure bridge mount with the security benefit of hiding screws behind the cap with a snap fitting.
Build & Install notes:
- If you mount outside, use PETG or your favourite flavour of UV-resistant material
- I added one file on each plate; multiply based on your needs
- On X1C, I left the door open for the PETG; when you have a full build plate, it gets hot in the chamber, which may cause spaghetti errors
- If the cap doesn't fit, rotate it; it is easy to get frustrated up on a 30' ladder when you have the orientation wrong, trust me ;)
- 6 x 3/8 self-tapping soffit screws were adequate for 90% of my installation, but consider having some 8 x 3/8 handy with a drill/bit to pilot hole any gaps
Merry Christmas to every Clark W Griswold installing these bad boys in the snow and freezing rain. Hopefully, these models make your life easier!