Govee H5075 Hydrometer Thermometer Keyhole Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed version of the Grovee H5075 hanger to make orientation easier
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer.
I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung, especially inside an enclosure. The revised geometry helps keep the display facing the intended direction instead of rotating or sitting at an awkward angle.
The hanger uses a standard keyhole mount, making it quick to install and remove while keeping the sensor secure.
Print Settings
Material: PLA
Infill: 15%
Supports: Not required
Orientation: Print flat on the bed
-PETG may be a better solution for long term durability.
This remix is ideal for grow tents, reptile enclosures, or any setup where display orientation and easy mounting matter.