Liczymy pasujące modele…
Update 23/05/26: added mirrored version to fix battery hole issue Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly Print Settings:…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
I bought a pack of 8 of these hygrometers for a filament dry-box storage project and had few left over. I wanted to have one of the leftovers out next to the dry-boxes to show the difference between inside them vs outside. So this is a…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
I recently built the LACK enclosure for my Prusa Mk3S. As I decided to leave the power supply mounted on the frame and not move it, I wanted to add a thermometer to the enclosure, to check on the inside temperature. I found a lot of…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
angled mount will fit small and bigger thermometers, with openings from 12mm up use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4…
Stand for the round mini hygrometer / thermometer from Amazon or Aliexpress, that fits perfectly into the Bambu Lab AMS. It is slightly higher than other stands so that the humidity is measured close to the filament. I printed it in PLA…
The 2 STL files will print the 2 halves of a storage device for the probes used with a meat thermometer used for grilling smoking or roasting meat. I designed this around the ThermoWorks probe so the probe will store neatly without velcro…
The print is very easy to make. To supports are needed. Place the hole on the plate. You can use https://www.amazon.de/dp/B07JG9QZ2B?ref=ppx_yo2ov_dt_b_product_details&th=1 as sensor. ######################################### Der Druck…
For this project we are building an Arduino-based thermometer and humidity display. It shows the current temperature, temperature index (feel), humidity level and dew point. It also displays a graph of the readings from the past 12 hours.…
I had an extra, cheap, round, hygrometer from buying a few for a dry box so I decided to make a simple stand for it.
I have made this simple stand for a commonly available, cheap hygro- and temperature-sensor. The stand is angled under 60 degrees and currently serves me well on my desk to show me the room temperature and humidity of my office. Update…
This simple model allows to put the Sonoff SNZB-02D inside your ACE Pro
Xiaomi thermometer 3DPrinter Holder that uses an M3 screw and a (3d printed) T-nut Printed in PETG with 10% infill Is recommended to put supports under the arms that hold the thermometer
Xiaomi Mi Temperature and Humidity Monitor 2 Stand Elevate your smart home setup with this clean, functional desk stand. This design transforms the small Xiaomi sensor into a stylish desktop or shelf accessory, improving visibility while…
The outdoor temperature sensors that come with the Sharp Atomic Clocks are oddly shaped, a pain to mount, and for some inexplicable reason are black in color. This is just a simple casing with vents to allow for easy mounting of the…
A science teacher at my school asked if I could design a simple thermometer holder that would clip onto the edge of a beaker and hold the thermometer upright. She showed me one in a science equipment c catalog for about $10 each. I told…
This 3D printable lid was specifically designed for the IKEA EKLATANT jar with a 100 mm diameter and enables precise temperature monitoring during sourdough fermentation. The lid is designed to fit common digital thermometers with an…
I was inspired by this deisgn https://www.thingiverse.com/thing:6100697 thing is, i don't like the fact that i need to print it with support, so i made my own i also chose to use 6x2mm magnet, which are also used in the gridfinity project…
Thermometer box from the Kaufland store (certainly sold elsewhere). This is the Country Side CFGT 433 B2 model. Everything fits perfectly. 6 pieces of M4x40 screws are needed. The insert can be pulled out and the box can be used for…
this holder was born from the need of a friend who always carries this thermometer with him to measure water temperature as he is an enthusiast of bathing in the winter time. "ice man" I adapted the tube with cover and made several…
These EXPO fine point dry erase pen compatible parts are for use with smily77's "v2 version" of the plot clock / thermometer: https://www.thingiverse.com/thing:371248 Actually it's technically not a remix rather than a redesign, since the…
This is a remix based on my Expo fine point parts, intended to fit the larger chisel style Expo dry erase markers. To use this you will need to print the rest of the parts for a plot clock. I liked smily77's "V2" arms and PIR mount:…
I liked the plot clock body designed by stylesuxx, but I needed to add some holes for the temp sensor and power cable. To use this, you'll have to print the covers and servo housing from stylesuxx here:…
Simply slide thermometer inside the tube with bulb first. Slide the stick in and rotate for 10-20 fast rotations and temp indicator have to be lower. Stick can be substituded with a pencil.
About This gridfinity holder is designed for the Braun thermometer. Print instructions Based on one print run: PLA, 0.2 mm, no support.
Ring holder for thermometer/hygrometer to fit in 44 mm diameter hole.
A stand for an analog humidity thermometer on the table. The mounting diameter is 50mm
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for clamps) Nozzle: 0.50mm Bed Temp: 85c Hotend: 255c Extrusion Multiplier: 0.90…
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
Ein Halter für den Innenraum des Core One der nicht im Weg ist, aber wenn nötig auch schnell entfernt werden kann. Benötigt wird: 2 Magneten (Durchmesser 6 mm, Stärke 3 mm)…
I was inspired by this deisgn https://www.thingiverse.com/thing:6100697 thing is, i don't like the fact that i need to print it with support, so i made my own i also chose to use 6x2mm magnet, which are also used in the gridfinity project…
LED thermometer build guide. There are two versions of this thermometer. An LED illuminated bars Type and an open strip LED type. Both have the same software installed and a photo cell to control the LED intensity.
IKEA FANTAST Thermometer has a long cord for its metal probe. In my kitchen, it was always an unruly bit of clutter. Here is a simple print to keep thermometer and its cord and probe together until it is time to use them. In the…
This square mount is specifically designed for Thlevel model . The device snaps perfectly into the mount, staying secure while remaining easy to remove. Questo supporto quadrato è realizzato appositamente per il modello Thlevel . Il…
A science teacher at my school asked if I could design a simple thermometer holder that would clip onto the edge of a beaker and hold the thermometer upright. She showed me one in a science equipment c catalog for about $10 each. I told…
This simple model allows to put the Sonoff SNZB-02D inside your ACE Pro
Stand for cheap thermometer / hygrometer that replaces LR44 batteries with single AAA battery as power source. Thermometer / hygrometer module can be bought on aliexpress, amazon etc. Variant with and without sensor mounted on the cable…
Stand for round mini hygro- thermometer (4.5cm / 1.77", chinese models) Can be printed without support. In this case the inner top overhangs can get a bit grubby but this doesn't mind much because the hygrometer devices covers the little…
Tired of the suction cup always falling off the fishtank glass?
Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…
Small model to mount the ThermPro thermometer TP357 on an IKEA Skadis board. Print right side up and use supports for the hooks.
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
Support for your filament coils that incorporates an integrated reservoir for silica gel balls and with a slot for a rectangular thermometer hygrometer with dimensions of 47.5 x 28.5 mm. It consists of three separate parts: The chassis…
In my short experience with Sy's Peglock System, I have found that things that don't have a contact surface high enough above the hook attachment can be knocked loose if rotated up. Extending that area a bit prevents it from rotating…
Thermometer/hygrometer stand with 40 mm diameter. Printed with PLA. No supports needed.
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
Xiaomi Mi Temperature and Humidity Monitor 2 Stand Elevate your smart home setup with this clean, functional desk stand. This design transforms the small Xiaomi sensor into a stylish desktop or shelf accessory, improving visibility while…
A sleek and functional stand designed to keep small indoor thermometers upright for better visibility and accurate readings. Material: PLA Infill: 20% Supports: No
Housing for Zigbee round thermometer - hydrometer (Tuya or HA) diameter 40mm, thickness 14mm for outdoor use Pouzdro pro Zigbee kulatý teploměr - hydrometr (Tuya nebo HA) průměr 40mm, tloušťka 14mm pro venkovní použití
A stand for an analog humidity thermometer on the table. The mounting diameter is 50mm
This is a remix of Morik's stand. It is longer and a bit wider so that the MJWSD06MMC fits well too. Printed with PLA grey and standard setting.
This is a thermometer clip for standard beakers. It hold a thermometer in place. The clip fits on most beakers between 200 ml and 1000 ml. It is used in science class for kids and the clips are much cheaper than a new thermometer ;-)
A simple kinda hidden wallmount for Sonoff SNZB-02LD Zigbee smart thermometer with four embedded magnets and screwholes Magnet size: 6x2mm and there is four holes for them, you might get away with only two magnets but i went with four.…
Good Display GDTHT019 E-paper thermometer and hygrometer is not designed to be placed on a table or shelf. That's why I created a model that allows it to be placed on a stand. The model is in two parts to make printing easier. The two…
Simple clip to mount your thermo-hygrometer directly onto 16 mm grow tent poles. Secure fit, clean positioning, easy to read. Use PETG for flexibility and crack resistance.
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the print. Tip: For a cleaner look, print it in PLA-CF. It offers a matte finish
Thermometer holder for Prusa CoreOne / + / L printer for direct control of temperature and humidity in the chamber. The thermometer is readable even through the door. Insert the thermometer into the printed part. Use the nylon rivet left…
Obudowa do termometru xiaomi. Obudowę można wykorzystać do pojemnika na filament. Simply drill two mounting holes in a transparent container and place one part outside and the other inside. Then, simply insert the thermometer into the…
Ring holder for thermometer/hygrometer to fit in 44 mm diameter hole.
Prusa CORE One (Plus) Hygrometer - Thermometer mount above the rear fans (press fit) illuminated by the original LEDs Place on top of the backside fans (middle position, press fit on the fan mount screws), can be easily removed, does not…
Einfacher kompakt Halter für ein ThermoPro TP-16 Fleischthermometer/Bratenthermometer.
A few months ago I bought some thermometers for $2, from the miscellaneous junk section of a local supermarket. I installed one outside my back door. Unsurprisingly it failed during a windy day. I didn't want to bin it, so I made up a…
I create a Version with FreeCAD for Redline Filament Spool.
This cap for the Cooler Master Elite Liquid Cooler has a holder for a small thermometer on the outer cover of the CPU Assembly I designed this model after this thermometer from Amazon…
This housing is sized for Acurite outdoor temperature transmitters. I printed this in white ASA for UV resistance and minimal solar heating. The module is held inside by a 50mm M3 screw inserted in the base. An M3 heat set insert is…
This is a CAD model of a Mini Hygrometer Thermometer (Digital Humidity Meter) that I designed in Shapr3D, based on a real product I own. It's a small indoor/outdoor humidity and temperature monitor often used in greenhouses, gardens,…
3D Printed Case for Mercury Medical Thermometer This 3D printed case is designed to safely store and protect a traditional mercury medical thermometer. The case helps prevent accidental damage and reduces the risk of breakage during…
Mini LCD Digital Thermometer, Hygrometer wall mount You can support me with Bitcoin or Lightning network HERE or normal payment HERE .
After some time under intensive sunlight original holder was decimated. Should fit any thermometer with 18mm diameter glass tube. Note: originally parts were white, but they yellowed under the sun. Print settings Use most ultraviolet and…
UPDATE 03NOV2023: The original location for the magnets did not work out as well as I had hoped. The bracket's weight causes it to slide down on the EMT conduit, making it hard to read in some applications. So I updated the model. I…
If you want to seal up a spool of filament with a hygrometer display in a vacuum bag, where do you put the display? At first I thought of mounting it in the spindle hole, but my filament spools all have solid tubes for the spindle hole so…
I was tired of always searching for my IR gun. Made a little wall mount holster. Set it up for screw holes, as I've had poor luck trying to print pegboard compatible items. It's a little tight on the sides for my brand (Nubee); but part…
Hey there, this is a support for my thermometer that i bought from AliExpress, if it fits yours, give it a print :) Happy printing from Portugal
PETG was printed, preferably at least 50% filling, for rigidity. A color change in the inscription was displayed on the lid during printing. We need 4 pieces of a 3x6 magnet.Elements without inscriptions were also laid out, as it is…
stp upravitelný držák pro hydro/teploměr pro upevnění na trubku o průměru 34 mm. Průměr si můžete upravit podle svých potřeb
This is a hard case for storing the BFOUR BF-30 meat thermometer. I printed this with: Filament: Overture PETG Bed temp: 80C Nozzle temp: 240C Infill: 10% Layer height: .2mm Print with the flat sides down. I did not use any support or bed…
Simple remix of an already good model. The holder shouldn't need air flow holes based on the original designer's testing, however, it makes me feel better having them. STL uses 15mm x 2mm magnets.
Had one of these meters just laying around. So I decided to make a mount for the K1 Max. Even though it's probably not need. You'll need one that's 1.06"W x 1.81"H from what the amazon page says. I actually took it off and lost is…
Um die Temperatur des Pool-Wassers zu bestimmen, wollte ich kein Kabel im Wasser haben oder ähnliches. Ich habe diesen Adapter für unsere 38mm Poolschläuche entworfen. Der Fühler kommt in eine mitgelieferte Hülse, mit einem ½ Zoll…
A holder for one of those cheap LCD thermometers you can find on Amazon, Temu or AliExpress. I wanted to mount it to the printer enclosure “ceiling”, and at a slight angle, so it is easily readable through the side panel. The thermometer…
This is a holder for a regular 1 in pegboard, made to fit my thermometer. I printed it in PLA and added a design on the front, but the design didn't turn out well so I removed it from the STL. I did use supports for the top pegs, but I…
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 1h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, no supports Post processing instructions: None Assembly instructions: Insert…
I was curious what the enclosure temperature of my Bambu Lab P1S was, but there isn't much room to place a thermometer. I had a round thermometer/hygrometer from another project that was quite small. Now, my idea was to mount it close to…
Stand / holder for Dinjunxi digital thermometer / hygrometer. Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No Supports: No **Resolution:** 0,2 Infill: 15 **Filament:** Giantarm PLA white Category: Other
Quick simple print for the 40mm Thermometer Hygrometer found on Amazon Magnets are 10mm by 2.5mm
Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture. Mounting 1 M3 Nut 1 M3 Screw 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight…
I designed a mount for a thermometer display wich you can click on the frame of an Anycubic i3 Mega S. The thermometer consists of a LCD display and a sensor. Both parts will be plug in to the mount. So no glue or tools are necessary. You…
Aufsteller für ein kleines Thermometer / Hygrometer von Aldi. Den am Gerät angebrachten Aufsteller empfinde ich nicht als so geeignet. Daher habe ich diesen mit einer leichten Neigung und sicherem Stand konstruiert. Über die Fülldichte…
Aufsteller für ein kleines Thermometer / Hygrometer von Aldi. Das Gerät lässt sich Bauart bedingt nicht gerade aufstellen. Daher habe ich diesen ohne Neigung mit sicherem Stand konstruiert. Über die Fülldichte lässt sich das Gewicht des…
Cap for glass laboratory thermometers. Square head to prevent rolling. OD to fit common plastic tubes for storage. ID sized to fit most typical lab thermometers.L
The old Biacore logo from 1990-2007, i.e. antibody and antigen figurine combined with a Xioami Mi/Mijia Bluetooth Thermometer (43x43x13 mm) holder. The model is printed as 3 parts that have to be glued together. How to print: 0.4 mm…
Simple frame to mount a common humidity / temperature display inside the IKEA MK4 housing. Fits underneath one of the top left or right screws of the IKEA Lack housing. https://printables.com/model/3673-prusa-enclosure-v2-mmu2s
