1 / 3
Thermometer Bracket for Top of Prusa MK3/MK4 with Swivel — zdjęcie 1
1 / 3

Thermometer Bracket for Top of Prusa MK3/MK4 with Swivel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

1,76 € – 2,16 € netto (bez VAT)

Dla pliku: Thermometer Bracket_0.4n_0.2mm_PETG_MK4_2h15m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,96 € netto (środek widełek).

Masa podana przez autora
20 g
Czas druku podany przez autora
2,24 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Remix of "Adjustable Thermometer bracket for Original Prusa Enclosure" that mounts to the top of the printer frame.

Ocena
4,923 / 5
Polubienia
60
Pobrania
202
Wydruki
16
Wyświetlenia
744
Oceny
13

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

With the way my enclosure lights are set up, the default thermometer mount was hard to read. This is a remix of the official "Adjustable Thermometer bracket for Original Prusa Enclosure" that instead mounts to the top of the printer frame. The bracket fits both the MK3 and MK4 frames.

There are holes for 3 screws. If you want to rigidly mount square on to the printer frame, use the two outside screws. If you want to add the ability to swivel left and right, just use the center screw. NOTE: the bracket will interfere with the MK4 when it is at max Z height and swiveled. I only recommend using this feature on the MK3.

Uses M3 x 8mm screws and M3 square nuts. I've also included an alternate version that does not require square nuts (the screws just thread into the plastic).

Tagi