Flashforge Adventurer 5m / 5m Pro Filter Cover Thermometer / Hygrometer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
High-flow filter cover replacement with mounting hole for a thermometer or thermometer / hygrometer combo.
- Ocena
- 5 / 5
- Polubienia
- 157
- Pobrania
- 656
- Wydruki
- 3
- Wyświetlenia
- 3485
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had already designed a exhaust solution for the Adventurer 5m Pro (Removable Exhaust Duct for FlashForge Adventurer 5m Pro by Simon | Download free STL model | Printables.com), so wanted remove the exhaust filter and cover plate. I was also keen to keep an eye on temperature in the printer. I saw a model by WingWong with a similar thermometer and hygrometer sensor in and decided to combine the two ideas.
I am keeping the printers exhaust fan for the time being, so wanted some protection for it, in case some stray spaghetti ended up heading towards it.
This design prints up right, so that the layer strength supports the operation of the clip. I printed in Elegoo matte PLA with a 0.2mm layer height, Arachne wall generator, 3 walls, 15% gyroid infill and auto tree supports. Tree supports on the build plate only and bridges not supported. I slimmed down the tree supports a bit too with various settings.
Thermometer was purchased on Ebay for <£2. Temp and humidity versions are available too. For those asking, this is the device I bought: Mini Thermometer Black/White LCD Digital Thermometer Temperature Tester | eBay
I also now have a corresponding cover without a sensor mount: matching cover.
Final thing to note, if you want to use this with a filter, it will not fit together unless you cut away a small section of the filter where the sensor impinges on it.