Counting matching models…
A science teacher at my school asked if I could design a simple thermometer holder that would clip onto the edge of a beaker and hold the thermometer upright. She showed me one in a science equipment c catalog for about $10 each. I told…
I recently built the LACK enclosure for my Prusa Mk3S. As I decided to leave the power supply mounted on the frame and not move it, I wanted to add a thermometer to the enclosure, to check on the inside temperature. I found a lot of…
About This gridfinity holder is designed for the Braun thermometer. Print instructions Based on one print run: PLA, 0.2 mm, no support.
Ring holder for thermometer/hygrometer to fit in 44 mm diameter hole.
A stand for an analog humidity thermometer on the table. The mounting diameter is 50mm
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for clamps) Nozzle: 0.50mm Bed Temp: 85c Hotend: 255c Extrusion Multiplier: 0.90…
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
Ein Halter für den Innenraum des Core One der nicht im Weg ist, aber wenn nötig auch schnell entfernt werden kann. Benötigt wird: 2 Magneten (Durchmesser 6 mm, Stärke 3 mm)…
I was inspired by this deisgn https://www.thingiverse.com/thing:6100697 thing is, i don't like the fact that i need to print it with support, so i made my own i also chose to use 6x2mm magnet, which are also used in the gridfinity project…
LED thermometer build guide. There are two versions of this thermometer. An LED illuminated bars Type and an open strip LED type. Both have the same software installed and a photo cell to control the LED intensity.
IKEA FANTAST Thermometer has a long cord for its metal probe. In my kitchen, it was always an unruly bit of clutter. Here is a simple print to keep thermometer and its cord and probe together until it is time to use them. In the…
This square mount is specifically designed for Thlevel model . The device snaps perfectly into the mount, staying secure while remaining easy to remove. Questo supporto quadrato è realizzato appositamente per il modello Thlevel . Il…
A science teacher at my school asked if I could design a simple thermometer holder that would clip onto the edge of a beaker and hold the thermometer upright. She showed me one in a science equipment c catalog for about $10 each. I told…
This simple model allows to put the Sonoff SNZB-02D inside your ACE Pro
Stand for cheap thermometer / hygrometer that replaces LR44 batteries with single AAA battery as power source. Thermometer / hygrometer module can be bought on aliexpress, amazon etc. Variant with and without sensor mounted on the cable…
Stand for round mini hygro- thermometer (4.5cm / 1.77", chinese models) Can be printed without support. In this case the inner top overhangs can get a bit grubby but this doesn't mind much because the hygrometer devices covers the little…
Tired of the suction cup always falling off the fishtank glass?
Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…
Small model to mount the ThermPro thermometer TP357 on an IKEA Skadis board. Print right side up and use supports for the hooks.
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
Support for your filament coils that incorporates an integrated reservoir for silica gel balls and with a slot for a rectangular thermometer hygrometer with dimensions of 47.5 x 28.5 mm. It consists of three separate parts: The chassis…
In my short experience with Sy's Peglock System, I have found that things that don't have a contact surface high enough above the hook attachment can be knocked loose if rotated up. Extending that area a bit prevents it from rotating…
Thermometer/hygrometer stand with 40 mm diameter. Printed with PLA. No supports needed.
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
Xiaomi Mi Temperature and Humidity Monitor 2 Stand Elevate your smart home setup with this clean, functional desk stand. This design transforms the small Xiaomi sensor into a stylish desktop or shelf accessory, improving visibility while…
A sleek and functional stand designed to keep small indoor thermometers upright for better visibility and accurate readings. Material: PLA Infill: 20% Supports: No
Housing for Zigbee round thermometer - hydrometer (Tuya or HA) diameter 40mm, thickness 14mm for outdoor use Pouzdro pro Zigbee kulatý teploměr - hydrometr (Tuya nebo HA) průměr 40mm, tloušťka 14mm pro venkovní použití
A stand for an analog humidity thermometer on the table. The mounting diameter is 50mm
This is a remix of Morik's stand. It is longer and a bit wider so that the MJWSD06MMC fits well too. Printed with PLA grey and standard setting.
This is a thermometer clip for standard beakers. It hold a thermometer in place. The clip fits on most beakers between 200 ml and 1000 ml. It is used in science class for kids and the clips are much cheaper than a new thermometer ;-)
A simple kinda hidden wallmount for Sonoff SNZB-02LD Zigbee smart thermometer with four embedded magnets and screwholes Magnet size: 6x2mm and there is four holes for them, you might get away with only two magnets but i went with four.…
Good Display GDTHT019 E-paper thermometer and hygrometer is not designed to be placed on a table or shelf. That's why I created a model that allows it to be placed on a stand. The model is in two parts to make printing easier. The two…
Simple clip to mount your thermo-hygrometer directly onto 16 mm grow tent poles. Secure fit, clean positioning, easy to read. Use PETG for flexibility and crack resistance.
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the print. Tip: For a cleaner look, print it in PLA-CF. It offers a matte finish
Thermometer holder for Prusa CoreOne / + / L printer for direct control of temperature and humidity in the chamber. The thermometer is readable even through the door. Insert the thermometer into the printed part. Use the nylon rivet left…
Obudowa do termometru xiaomi. Obudowę można wykorzystać do pojemnika na filament. Simply drill two mounting holes in a transparent container and place one part outside and the other inside. Then, simply insert the thermometer into the…
Ring holder for thermometer/hygrometer to fit in 44 mm diameter hole.
Prusa CORE One (Plus) Hygrometer - Thermometer mount above the rear fans (press fit) illuminated by the original LEDs Place on top of the backside fans (middle position, press fit on the fan mount screws), can be easily removed, does not…
Einfacher kompakt Halter für ein ThermoPro TP-16 Fleischthermometer/Bratenthermometer.
A few months ago I bought some thermometers for $2, from the miscellaneous junk section of a local supermarket. I installed one outside my back door. Unsurprisingly it failed during a windy day. I didn't want to bin it, so I made up a…
I create a Version with FreeCAD for Redline Filament Spool.
This cap for the Cooler Master Elite Liquid Cooler has a holder for a small thermometer on the outer cover of the CPU Assembly I designed this model after this thermometer from Amazon…
This housing is sized for Acurite outdoor temperature transmitters. I printed this in white ASA for UV resistance and minimal solar heating. The module is held inside by a 50mm M3 screw inserted in the base. An M3 heat set insert is…
This is a CAD model of a Mini Hygrometer Thermometer (Digital Humidity Meter) that I designed in Shapr3D, based on a real product I own. It's a small indoor/outdoor humidity and temperature monitor often used in greenhouses, gardens,…
3D Printed Case for Mercury Medical Thermometer This 3D printed case is designed to safely store and protect a traditional mercury medical thermometer. The case helps prevent accidental damage and reduces the risk of breakage during…
Mini LCD Digital Thermometer, Hygrometer wall mount You can support me with Bitcoin or Lightning network HERE or normal payment HERE .
After some time under intensive sunlight original holder was decimated. Should fit any thermometer with 18mm diameter glass tube. Note: originally parts were white, but they yellowed under the sun. Print settings Use most ultraviolet and…
UPDATE 03NOV2023: The original location for the magnets did not work out as well as I had hoped. The bracket's weight causes it to slide down on the EMT conduit, making it hard to read in some applications. So I updated the model. I…
If you want to seal up a spool of filament with a hygrometer display in a vacuum bag, where do you put the display? At first I thought of mounting it in the spindle hole, but my filament spools all have solid tubes for the spindle hole so…
I was tired of always searching for my IR gun. Made a little wall mount holster. Set it up for screw holes, as I've had poor luck trying to print pegboard compatible items. It's a little tight on the sides for my brand (Nubee); but part…
Hey there, this is a support for my thermometer that i bought from AliExpress, if it fits yours, give it a print :) Happy printing from Portugal
PETG was printed, preferably at least 50% filling, for rigidity. A color change in the inscription was displayed on the lid during printing. We need 4 pieces of a 3x6 magnet.Elements without inscriptions were also laid out, as it is…
stp upravitelný držák pro hydro/teploměr pro upevnění na trubku o průměru 34 mm. Průměr si můžete upravit podle svých potřeb
This is a hard case for storing the BFOUR BF-30 meat thermometer. I printed this with: Filament: Overture PETG Bed temp: 80C Nozzle temp: 240C Infill: 10% Layer height: .2mm Print with the flat sides down. I did not use any support or bed…
Simple remix of an already good model. The holder shouldn't need air flow holes based on the original designer's testing, however, it makes me feel better having them. STL uses 15mm x 2mm magnets.
Had one of these meters just laying around. So I decided to make a mount for the K1 Max. Even though it's probably not need. You'll need one that's 1.06"W x 1.81"H from what the amazon page says. I actually took it off and lost is…
Um die Temperatur des Pool-Wassers zu bestimmen, wollte ich kein Kabel im Wasser haben oder ähnliches. Ich habe diesen Adapter für unsere 38mm Poolschläuche entworfen. Der Fühler kommt in eine mitgelieferte Hülse, mit einem ½ Zoll…
A holder for one of those cheap LCD thermometers you can find on Amazon, Temu or AliExpress. I wanted to mount it to the printer enclosure “ceiling”, and at a slight angle, so it is easily readable through the side panel. The thermometer…
This is a holder for a regular 1 in pegboard, made to fit my thermometer. I printed it in PLA and added a design on the front, but the design didn't turn out well so I removed it from the STL. I did use supports for the top pegs, but I…
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 1h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, no supports Post processing instructions: None Assembly instructions: Insert…
I was curious what the enclosure temperature of my Bambu Lab P1S was, but there isn't much room to place a thermometer. I had a round thermometer/hygrometer from another project that was quite small. Now, my idea was to mount it close to…
Stand / holder for Dinjunxi digital thermometer / hygrometer. Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No Supports: No **Resolution:** 0,2 Infill: 15 **Filament:** Giantarm PLA white Category: Other
Quick simple print for the 40mm Thermometer Hygrometer found on Amazon Magnets are 10mm by 2.5mm
Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture. Mounting 1 M3 Nut 1 M3 Screw 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight…
I designed a mount for a thermometer display wich you can click on the frame of an Anycubic i3 Mega S. The thermometer consists of a LCD display and a sensor. Both parts will be plug in to the mount. So no glue or tools are necessary. You…
Aufsteller für ein kleines Thermometer / Hygrometer von Aldi. Den am Gerät angebrachten Aufsteller empfinde ich nicht als so geeignet. Daher habe ich diesen mit einer leichten Neigung und sicherem Stand konstruiert. Über die Fülldichte…
Aufsteller für ein kleines Thermometer / Hygrometer von Aldi. Das Gerät lässt sich Bauart bedingt nicht gerade aufstellen. Daher habe ich diesen ohne Neigung mit sicherem Stand konstruiert. Über die Fülldichte lässt sich das Gewicht des…
Cap for glass laboratory thermometers. Square head to prevent rolling. OD to fit common plastic tubes for storage. ID sized to fit most typical lab thermometers.L
The old Biacore logo from 1990-2007, i.e. antibody and antigen figurine combined with a Xioami Mi/Mijia Bluetooth Thermometer (43x43x13 mm) holder. The model is printed as 3 parts that have to be glued together. How to print: 0.4 mm…
Simple frame to mount a common humidity / temperature display inside the IKEA MK4 housing. Fits underneath one of the top left or right screws of the IKEA Lack housing. https://printables.com/model/3673-prusa-enclosure-v2-mmu2s
Digital thermometer stand for the popular Chinese thermometer, with the adjustable angle. There are two versions of the base: With two pegs for wrapping the sensor wire. Plain base with no pegs. Print Settings Printer Brand: Prusa…
This is simple model of holder for temperature and humidity sensor from aliexpress. Sensor dimmensions: Heigh, Width - 43,85 mm ; Depth 13,35 mm
I got a cheap food dehydrator from Amazon to dry filament. I didn't want to destroy the trays in case I ever want to actually dehydrate food. I printed a model off here that was supposed to be for the same model. It didn't quite fit. It's…
A minimalist mount for the usual round hygrometer and thermometer. Allow you to place it easily on any flat surface. You don't need any support to print it. PETG works great.
This is an enclosure for the SHT21 reference design thermometer by Sensirion. It can be placed on a desk using a stand, or it can be hung on the wall.
I remixed the wall mount, because I wanted to have two screw holes with a bevel, no text and round corners. Thanks to LICK_THE_BUTTER for the inital work. No supports needed!
Objective I always wanted to know the grouphead temperature of my LaPavoni lever machine in order to remove the related guesswork and thus getting more consistent results. Unfortunatly all available solutions failed to match the general…
Although the original design fits in terms of dimensions, the back cover is too loose, which means that the sandwich structure of the display is not sufficiently strong. For this reason, I developed a solution with screws and press-in…
I wanted an easier way to store my IKEA meat thermometer probe. Made a quick sleeve so I could keep it together, magnetically stuck to my oven. Needs three 8x2mm glued in place. DONT print in PLA. It can deform near an oven. Also, the…
Ich habe die Halterung mit PLA gedruckt ohne Supports, funktioniert wenn man die Halterung mit den Stacheln nach oben druckt.
I designed this to hold cheap hygrometers I purchased from Amazon. https://www.amazon.com/JEDEW-Hygrometer-Thermometer-Humidifiers-Dehumidifiers/dp/B07GR65CNT/
I had a issue where the hinge that held my watch to my wrist broke and I needed a replacement so I made one. Printer specs used to print: Printer type: Ender 3 Nozzle: 0.4mm speed:100mm/s layer height: 0.1mm Material: PLA
Details A hygrometer/thermometer mount, using suction cups, to mount to the inside of a reptile enclosure or terrarium . This model fits commonly found rectangular humidity and temperature meters and 20mm suction cups found on Amazon.…
I love the Combustion Inc thermometer, but needed a way to keep the display and the temperature probe together and conveniently charge them. I created this wall mount case to store them. There are slots in the bottom that allow you to…
UPDATE: Added a pegboard version of this mount using Sy's Peglock System design. I picked up an AMES Instruments 12:1 infrared temperature gun from Harbor Freight (the $22 model) and couldn't find a stand or holster for it so I designed…
This is a simple holder I threw together in TinkerCAD for a Nor-Tec thermometer from Action. I wanted a way to mount it to my IKEA SKÅDIS board and nothing I could find would really work for this cheap thermometer. It comes with two 8 mm…
A simple holder / mounting for a mini-hygrometer on 3030 profile (up and down usable). If you want support me, buy me an coffee :-) buymeacoffee.com/3dwt
There are two versions, one with rounded edges and the other with normal edges. Printer Settings: Layer Height: 0.1mm, but you can print it on 0.2mm 100% Grid Infill It doesn't need supports if you print it like in the last photo I used…
Those little Bluetooth thermometers from Xiaomi can be flashed with custom firmware to turn them into Zigbee devices. But Zigbee implementation consumes a bit more power and a small CR2032 battery may not last too long. This model…
