Round Hydrometer/Thermometer Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.14 – €1.39 net (excluding VAT)
For file: thermometer holder NEW_0.4n_0.1mm_PLA_MK4S_1h13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.27 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holder for round room hydrometer/thermometer
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 551
- Makes
- 4
- Views
- 1,169
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
Update 23/05/26: added mirrored version to fix battery hole issue
Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly
Print Settings:
Layer Height: smaller is better, i recommend 0.15 for 0.4 and 0.2 for 0.6 nozzles
Extrusion Width: use same as nozzle diameter, 0.6 for 0.6mm nozzle 0.4 for 0.4mm nozzle
Perimeters: 2 for 0.6 width, 3 for 0.4 width
Infill: higher infill means the base will be heavier, 30% gyroid worked well
Material: i used ABS+, but any hard plastic will work (PLA, PETG, ABS, etc)