1 / 6
Radiation shield for Xiaomi Mijia thermometer meteostation / no supports — image 1
1 / 6

Radiation shield for Xiaomi Mijia thermometer meteostation / no supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Prints without supports, has 45mm hole for sensors. Attach by zipties - no hardware needed. Fusion 360 file included.

Rating
5 / 5
Likes
34
Downloads
179
Makes
2
Views
1,612
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Radiation shield or sun shield for Mijia thermometer. 

I was using this thermometer for about 1,5years outside (-10°C to 45°C) under simple PLA 3d-printed roof and it worked well (despite that it should be indoor one.) 

The roof was trapping heat, so I made adjustments to this radiation shield to use it with this thermometer. Here is a comparison on spring cloudy day:

 

How to use

  1. Slide thermometer to the holder
  2. Plug holder into the shield (the thermometer is held side-to-side by the hole diameter)
  3. Secure the holder by ziptie or 2mm x 10 screw to plastic
  4. Secure the whole thing with zipties to your location, in my case - balcony guardrail. 

Print

  • PETG or other material suitable for outdoors
  • 0,25mm layer height

Tags