IR thermometer gun holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a holder or rack to hold an IR thermometer gun.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 284
- Makes
- 7
- Views
- 1,651
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a holder or rack to hold an IR thermometer gun. The brand I have is a Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun , but I see these sold under a variety of names on Amazon and elsewhere.
I made 4 versions, with different mounting options. Top mount is meant to be mounted underneath a flat surface. Face mount is to be mounted with the laser end onto a surface. Left and right mount respectively.
Print instructions
Category: Tool Holders & Boxes Summary
This is a holder or rack to hold an IR thermometer gun. The brand I have is a Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun , but I see these sold under a variety of names on Amazon and elsewhere.
I made 4 versions, with different mounting options. Top mount is meant to be mounted underneath a flat surface. Face mount is to be mounted with the laser end onto a surface. Left and right mount respectively.
Print Settings
Rafts:
No
Supports:
No
</div>Resolution:.30
Infill:
20%
</div>Filament:
Any Any solid material Any
Notes:
I printed this using overture PETG on draft settings a .3 mm height with 20% infill. No supports are required.
I do recommend using 3 perimeter layers, else the friction tabs can print funny if there is not adequate infill. If you use 2 layers, consider reviewing and changing your infill to make sure this section prints ok.