1 / 3
Original Prusa Enclosure Left Filament Guide and Adjustable Thermometer Bracket Combo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.13 – €0.16 net (excluding VAT)
For file: mk4_ptfe_clip_0.4n_0.3mm_PLA_MK4_8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 8.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Original Prusa Enclosure Adjustable Thermometer Bracket and Left Filament Guide Combo
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 208
- Makes
- 6
- Views
- 1,471
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
Features
- Combines the Adjustable Thermometer Bracket and the Filament Guide
- Enables to use a second spool holder on the left side
- Uses the same hardware as for the filament guide
What you need
- Printed parts
- thermometer_bracket_A (1x)
- thermometer_bracket_B (1x)
- filament_guide_A (1x)
- mk4_ptfe_clip (0~2x)
- Hardware
- M3n nut (5x)
- M3x8 screw (3x)
- M3x12 screw (2x)
- PTFE tube (1x) 2.5x4x650 mm
Print Instructions
- Use Default Prusa Slicer 0.30mm DRAFT Print Settings
- Nozzle Diameter : 0.40mm
- Filament : PETG or PLA
- Supports : Not required
- Brim : Not required
- Perimeters : 2~3
Assembly
- Thermometer_filament_guide
- Follow the instruction for the Prusa Enclosure assembly
- mk4_ptfe_clip
- Just clip it to the frame of the MK4
Left Spool Holder
- Print the Spool-holder-R.stl in mirror mode