Triangular thermometer stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Triangular stand for cheap Chinese thermometers, designed for airflow and to not tip over.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
A triangular model for the common rectangular thermometers you can get from Ebay / Aliexpress.
I mostly designed it like this for fun, but it should not tip over while providing plenty of airflow to quickly pick up temperature changes.
It should not be too hard a print, but it does have some overhangs which require a bit of cleanup. I printed this one in PETG, but it should work just as well in PLA.
You can also adjust the dimensions without too much effort, I made the model in CadQuery 2.
To do so, go to my GitHub page for the source code and instructions: https://github.com/qlum/thermometer-housing