1 / 8
Govee H706A Permanent Outdoor Lights Pro Mount Bracket — zdjęcie 1
1 / 8

Govee H706A Permanent Outdoor Lights Pro Mount Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Govee Permanent Outdoor Lights Pro Mount Bracket for H706A

Ocena
5 / 5
Polubienia
15
Pobrania
300
Wydruki
1
Wyświetlenia
941
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Govee H706A Permanent Outdoor Lights Pro Mount Bracket

I’ve designed two versions of this mount:

  1. A side-mount version
  2. A narrow-edge version requires just 1.5 inches of space.
  3. Both versions are designed with #8 self-tapping screws.

I recommend printing these brackets in PETG, as it offers better durability for potential heat exposure from the LEDs. PLA may degrade faster under such conditions.

For screws, I purchased 300 pieces of #8×3/4” self-tapping sheet metal screws (410 stainless steel) for about $12 at the time of writing. These work great for this setup.

Tagi