Sojag Genova Gazebo Govee String Light Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ditch the dangle! Clips for Govee H7021 lights for the Sojag Genova Gazebo
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't like the hanging unkempt look of the Govee lights in our Sojag Genova Gazebo so I came up with some little clips that allow them to me mounted on the interior extrusion. Originally I had intended to run the wires on top of the extrusion and secure in the little grooves in my clips but then found it looked cleaner if I tucked the wires in the groove in the underside of the extrusion. I printed these in PETG with a .4 nozzle. 4 perimeters and 5 tops and bottoms. I also used a very subtle Fuzzy Skin to dull down the PETG shine. They can be kinda tight to push the clips together but I had good luck pushing down onto a table while preventing the legs spreading so they don't snap.