Sojag Genova Gazebo Govee String Light Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ditch the dangle! Clips for Govee H7021 lights for the Sojag Genova Gazebo
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I didn't like the hanging unkempt look of the Govee lights in our Sojag Genova Gazebo so I came up with some little clips that allow them to me mounted on the interior extrusion. Originally I had intended to run the wires on top of the extrusion and secure in the little grooves in my clips but then found it looked cleaner if I tucked the wires in the groove in the underside of the extrusion. I printed these in PETG with a .4 nozzle. 4 perimeters and 5 tops and bottoms. I also used a very subtle Fuzzy Skin to dull down the PETG shine. They can be kinda tight to push the clips together but I had good luck pushing down onto a table while preventing the legs spreading so they don't snap.