Blink Outdoor 3rd gen camera Hood - Visera cámara Blink Outdoor 3ª generación
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hood to protect Blink Outdoor 3rd gen cameras from the rain - Visera para proteger las cámaras Blink 3ª gen de la lluvia
- Ocena
- 4,852 / 5
- Polubienia
- 185
- Pobrania
- 1487
- Wydruki
- 30
- Wyświetlenia
- 5254
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to protect the lens of my Blink Outdoor cameras from heavy rain (the water drops in the lens turn the image very blurry). So I decided to do a remix of the wonderful Blink camera Hood created by Neil Baker https://www.thingiverse.com/w4hfv/designs :
https://www.thingiverse.com/thing:4662339
Initially I had to scale it up by 5% to perfectly fit my Blink cameras. After that I decided to enlarge the shade (I have checked the enlarged hood doesn’t show in the image). This was version 1.
In version 2 I enlarged also the cover in the back of the camera to provide additional protection from the rain.
Note: This cover was tested on the Outdoor model of the Blink camera, no with the XT or XT2 models. I am not sure if it will fit perfectly on those.
Necesitaba proteger la lente de mis cámaras Blink Outdoor de la lluvia intensa (las gotas de agua en la lente vuelven la imagen muy borrosa). Así que me decidí a hacer un remix de la estupenda visera para cámara Blink creada por Neil Baker https://www.thingiverse.com/w4hfv/designs :
https://www.thingiverse.com/thing:4662339
Inicialmente tuve que ampliar la pieza un 5% para que se ajustase perfectamente a mis cámaras. Luego decidí alargar la visera (he comprobado que la visera extendida no aparece en la imagen). Esa fue la versión 1.
En la versión 2 extendí también la pieza en la parte trasera de la cámara para proporcionar protección adicional de la lluvia.
Nota: Esta cubierta fue probada con el modelo Outdoor de la cámara Blink, no con el modelo XT o XT2. No estoy seguro de que sirva para estos.
Print Settings
Supports:
Yes
Infill:
25
Category: Camera