Liczymy pasujące modele…
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Wydruk około 4,09 €–5,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This mount allows you to install your Blink Doorbell at a 25 degree angle in a corner. There are 3 different sets of screw holes incase you need to offset the mouting if using existing holes. e.g for wiring.
I had been just double adhesive taping this thing and realized that since I had an actual working 3D printer I should probably design a mount. I made sure that it can accommodate fairly large USB flash drives and added another 2mm to the…
I needed a mount to get my Blink Sync Module 2 (cumbersome name) off my desk without mounting it to the wall. Everything I found was at an odd orientation and/or did not have a cutout for the USB memory module I added. I used this short,…
A simple wall mount Blink Sync 2 Module that easily screws to the wall. Print in PLA with general settings, requires supports.
8bit Pacman Ghosts are back… as fidget toys! Quick and easy to print, their compact size makes them perfect for on-the-go entertainment, while the magnetic design adds an element of tactile pleasure, enhancing the fidgeting experience.…
Wall mount for the new Blink Sync Module 2 that came with my Blink Outdoor (3rd Gen) camera. Included North American and European Outlets.
As with the original, you need to insert the power supply from the back side because it is (inexplicably) flared a tiny amount. I printed in PETG but any material should work fine.
Sollte unbedingt mit Support gedruckt werden, ohne könnte es ziemlich schwer werden. Ich hab es mit ABS gedruckt, PETG sollte aber auch kein Problem sein. PLA ist zu brüchig, daher leider nicht optimal.
A Simple Wall holder for the Blink Sync Module 2. Just use a decent 25mm double sided tape to stick it to the wall. Approx 10g of filament at 15% infill - 30 minute print on a Ankermake M5.
This is my rendition of the classic "Blinkenlights" meme, as seen in the ancient tomes of the Unix "Jargon" file, and various computer labs, clubs, etc. throughout the world. If you're confused by this, see Wikipedia for more details (…
Small signboard for your Blink doorbell to reduce solicitating. Works for normal installation or 25 degrees corner mount. No hardware needed. Write your own letter (Orcaslicer) Select Emboss tool and add a Text object Write your text,…
Hi everyone, I created a case for a simple DIY Blinkcode Diagnose on my Porsche 964. You can watch the video about it here: Things you need (non-affiliate links as examples I ordered): 3x 3V LEDs ( https://amzn.eu/d/00dAeHVl ) 2x 470Ohm…
Translucent spikes, see github projekt and the drawing on onshape .
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Wydruk około 4,09 €–5,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple friction fit privacy cover for the Blink Mini 2 camera. Standard infill / perimeters @ 0.20mm is sufficient. I printed mine in black and white PETG to match the cameras.
I wanted to mount my Blink Mini security camera to the GKTwo resin printer for monitoring. So I designed this mount to hold with 10mm x 3mm magnets on both sides. The Blink camera fits perfectly in the hole and I run the cable over the…
Project Description : This project is a great classic to understand how 4 of the most common components used in electronics work: the resistor, the LED diode, the transistor and the capacitor. Components: 9V Battery 470Ω resistors 2x 10kΩ…
This is a custom 3D-printed handheld grip designed specifically for the Saramonic Blink 500 Pro B2 (or similar dual-transmitter wireless microphone systems) and its included deadcat windscreen . I created this to transform the compact…
NOTICES (herunterscrollen für deutsche Version / scroll down for German language version) Non-commercial provision of a single construction file in STL-format for an adaptor for a frame-like aftermarket rear turn-signal holder for Yamaha…
Achtung es wreden zustzliche Materialien Benötigt: 6mm mal 25mm imbo Schrauben Einschmelzgewinde 8mm Der Ersteller der Dateien übernimmt keine Gewähr für die Qualität oder Fehlerfreiheit der von ihm veröffentlichten Inhalte und haftet…
Based on the work from https://www.thingiverse.com/thing:5437453 Added a bracket for 2x 5mm LED bulbs in-between the minute and hour. Bulbs wire to the ESP chip. Here are the features I've added to the ESP firmware. -Using an ESP-12F…
Centre console mount for Blink Marine PKP 2400 LI. Fills the space for the radio and uses OEM mounting points with a patruded mount to raise the CAN keypad to be flush with the centre console.
Passender Adapter vorn und hinten für Blinker mit M8 Gewinde (Ø 6,8 mm Bohrung)
This bird house will hold a Blink Outdoor 3 camera allowing you to capture any winged visitors you may have during the various seasons. Please print in appropriate material etc as the sun can warp PLA. Put together using a mixture of…
To mount this, use a M3x25 bolt and hex nut (depression included) to bolt into the enclosure. I'd recommend routing the Blink power cable through the bottom of the enclosure and BEHIND the mount prior to bolting it into place. With the…
This is a simple one-part front cover for the MaxiBlink RGB kit. It aligns the LEDs and spreads the light to improve the visual effect. It can simply be screwed onto the PCB with 3mm diameter screws (plastic or sheet metal screws…
Part Description Front and rear covers for the RetroBlink kit. Front Cover The main part consists of the light wells for each LED and bosses to screw to the PCB. It should be printed with white filament to reflect and diffuse the light…
This is my rendition of the classic "Blinkenlights" meme, as seen in the ancient tomes of the Unix "Jargon" file, and various computer labs, clubs, etc. throughout the world. If you're confused by this, see Wikipedia for more details (…
This holder hangs on the door of your printer (note: you can't close the door completely when installed)
this is a quick hack job of a remix to add ecas to the blinky encoder with the v623zz bearings so it can be used as a standalone encoder. this isn't tested alignment may be off.
Many Classic Mini's have an aftermarket steeringwheel. This tab makes the blinker canceler work again with Mountney aftermarket steeringwheels. Required: 2x Ø3,5 L=25mm Dowelpins Mounting instructions: After printing you will need to…
I recommend using ASA material since it may see rain and will be out in the sun. 4 walls Gyroid fill .15 structural or adaptive for best look
Mirror the model to get the left side housing. Print in abs/asa or anything else with high temp resistance. I plan on using abs, vapor smoothing it and spraying chrome spraypaint inside for the reflector coating
Ce support vous aidera à poser votre caméra Blink extérieur sur n'importe quel support de fenêtre ou autre. Ceci évitera que la caméra tombe en cas de vent ou d'instabilité.
So I keep this camera in my garage, sitting on top of the water heater. The normal stand plus right-angle adapter doesn't quite allow it to angle down and still sit properly, especially with the extended battery pack. Plus whenever it is…
I needed to mount a Blink Mini camera to a window, the available models looked heavy and overdone so I whipped this one up in Fusion 360. I used a bit of double-back tape to attach to the window, holding so far. Tape on Amazon:…
I created a pixel art lamp with a blinking half-heart. I will use it to stick on the inside of the car window and shine it outside. If you need the scheme I used, you can ask, but it's far from optimal.
Made this to hold my blink camera next to my printer. I've included the Fusion360 file so you could adapt it for a different magnet.
oprava ulomeného zobáčku pro držení "skla" blinkru
3 piece set. Garden stake can be used with or without extension. For Blink Outdoor (3rd Gen) camera.
I had a PI W2 plugged into my PRUSA mk3S+ but it didnt last long. I needed a seperate camera facility to monitor my prints. I had a spare Blink Camera that just needed a mount to my LACK enclosure. Here it is. Printed with 4 perimeters…
This stand is designed for the Blink Mini camera to be placed directly on the pad of the Ender 3 v3 SE. Settings: PLA Nozzle: 0.4mm Layer Height: 0.2mm Wall Thickness: 1.2mm Infill: 10% Support: Yes
j'ai utilisé 2 vis de 3x10 à tête fraisé et 2 vis Classic 3x8 , il y a une base avec inserts à imprimer en PETG pas en PLA n'oubliez pas de mettre l'échelle à 100,42 pour du PETG pour l'alimentation je me suis servi de ce model…
Base part for the 20-31003-L Blinker for Trailer, i need it to change leds with led cob strips
I had a Blink battery powered camera from Amazon that I wasn't using, so I thought it'd be cool to use it to watch my Voron 2.4 printer since I can check it from anywhere. I made this mount to attach it to the top front 2020 extrusion of…
Hier ist eine Blinkerhalterung für LED Blinker für eine Suzuki SV650 Baujahr 2022. Die Aussparungen für die Originalblinker ist zu groß, um die kleineren LED Blinker anzubringen. Daher habe ich diese Halterungen erstellt. Damit kann man…
The design makes use of the existing Blink camera bracket and the supplied screws. There is a curved cavity so a large cable tie can be passed through it and around a UK standard downpipe. Downpipe external diameter: 69 mm Cable tie…
When you remove the OEM turn signals, it leaves a large pocket in the fairings which makes it really annoying for mounting flush mount blinkers, the blinkers I went with just uses double sided tape so I just needed a part that fills in…
This camera mount fits in the very back center of the 3d printer on a piece of railing. Camera prep, installing case and mount: You do have to remove 2 screws from the back go the camera. The 2 screw are hidden under 2 rubber plugs. The…
Nachdem die Spiegel aus China Müll sind und umgehend kaputt gehen, wer kennt das nicht, hier meine Antwort: Spiegel anklappbar mit Blinker. Die Montage sollte keine Raketenwissenschaft sein, wir sind ja Maker und RC Schrauber. Ich habe 4…
everything is friction fit, you might need to readjust based on the printer
These was my first “self-designed” 3D printable parts, although I do not take full credit for them. If it wasn't for the donor designs mentioned below I would not have been able to learn Autodesk Fusion and 3D design concepts as easily as…
Blink Outdoor Camera Hood Print Settings Printer Brand: MK3 Printer: Prusa i3 **Rafts:** No Supports: No **Resolution:** Any Infill: Any Category: Electronics
Made this to your with the Blink Mini 1 & 2 Just remove the camera mount ball connector and snap it into the new socket. It connects in the front upper part of the enclosure using an M4 hardware. I used Griddex's socket to create. If its…
Tiltable Blink camera wall mount Use below bolts, nuts and screws. 1) Socket cap screw: M3-0.5x10mm x2pcs https://www.homedepot.com/p/Everbilt-M3-0-5-x-10-mm-Plain-Metric 2) Nylon lock nut: M3-0.5mm x2pcs…
Modifikovaný držák zadního světla s blinkry. Pasují z Jawa 350, nový typ se závitem M14x1.5. Category: Automotive
Držák předních blinkrů z Jawa 350 pro Babetta 210. Category: Automotive
A Doctor Who coaster design in the style of the Walking Dead. Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Elegoo Blue Creality Silver Silk Commercial Rights If you wish to have commercial…
Caps for Honda Grom blinker holes when removing blinkers, should fit all years. Blend file included for customization. Category: Other
I use these with blink mini (version 1) cameras. I have not tested them with the blink outdoor or blink mini version 2. Print with a brim and/or some glue stick to prevent the model lifting off the print sheet. Attach with screws or…
This is a simple friction fit privacy cover for the Blink Mini 2 camera. Standard infill / perimeters @ 0.20mm is sufficient. I printed mine in black and white PETG to match the cameras.
These brackets are used to attach these (B0CM3GPVG4) indicators to the original mounting points of the E-Odin. They must be printed in TPU and work like the original brackets.
Basic bracket to mount a Blink Outdoor 4 Camera (and probably other Blink Outdoor Cameras) on to a post, beam, rafter, etc. using cable ties, velcro straps, string, ribbon, wire, or whatever else you have lying around (I used “reusable…
I needed to mount my blink cam to a corner post and did not find anything so I made one. You just mount the baseplate to it and then connect it with zip ties to a post.
This object is licensed for PERSONAL USE ONLY . For commercial use contact me at instagram: @portallabs Materials: PETG PP/PETG for the flexures Blinking Module: Screws: 8x M3 x 10mm tapered 3x M3 x 15mm flat 4x M2.5 x 4mm flat 2x M2.5 x…
Technical details: Compatibility: Blink Mini 2 camera and Prusa XL printer Material recommendation: PLA+ or PETG for stability and durability Assembly: Screw connections using threaded inserts (M3) for a secure hold Attachment to the…
I modified the bracket to fit the ender 3v3 printer for the screws, I used two computer screws
Ich habe hier ein LED Herz erstellt und möchte das gern mit euch teilen. Es gibt zwei Versionen. Erste Version ist eine leichte Version die benötigt keine großen Fertigkeiten, ihr braucht lediglich 2x 3mm blink-LED vorzugsweise rot und…
the soldering kit https://shop.blinkyparts.com/de/Regenbogen-Einhorn-Loetbausatz-Einfacher-Anstecker-fuer-Anfaenger/blink232242 needs a stand … here it is. Print it and slide feet of the unicorn into the slots. Additional notes I'm…
Ein simpler AirTag Halter für die Simson. Dieser ist in der Optik des Originalen Blinkgeberhalters, der bei den Modellen S50 oder S51 unter dem Tank sitzt gehalten und hat auf der Unterseite einen Schraubverschluss, welcher dezent…
The thing that this thing is based off is so flimsy! I accidentally dropped my e-bike and it broke off. So I started to look for replacement parts. I know this thing can be found easily on Alliexpress on the cheap but my problem is it…
When buying a new set of indicators (at least the front ones), those now contain white plastic reflectors inside the housing, which my original GDR-ones for the back of the moped didn't have. So to calm my inner Monk, for the sake of…
Loved mscalora's mount but wanted to make it angled. Inspired by Khonsu's remix, this version has smaller wings. It's also symmetrical so it can be flipped to look left or right. Printed in PETG using paint on organic supports and it…
The Blink Mini camera is a cheap remotely accessible 1080p HD camera great for monitoring your print in progress. This mount is designed to attach to the lower two existing holes on the Prusa XL enclosure with arms to accommodate a left…
Just got a blink mini to monitor my 3d prints within an enclosure [made from Ikea Lack]. This is a mounting that goes around the camera, and in my case the camera is looking directly down at the prints. Print Settings Printer Brand: Prusa…
Pumpkin enclosure remixed from: Low poly pumpkin geometry remix of Low Poly Jack-o-Lantern by Tadziurski on Thingiverse Parts and Supplies: 9)- Bright LEDs 9)- 100 Ohm Resisters 4)- Tiny Black Screws Jumper Wire Shrink Tube Hot Glue…
BCAR for the Siren Blink using washers like BaconCreations' DCAR design. Looser version washers need the inner sleeve to get effective crush and friction on darts (It just moves out of the way if not). Sanding of pins recommended to get…
Simson Blinker Gehäuse . Für die Blinker ohne weißen Hintergrund nur mit der Metall-Lampen Fassung. Bei Fragen oder Verbesserungsvorschlägen bitte anschreiben danke.
The standard blink mount is mounted to the front clamp with 2xM3 screws and nuts - which insert into the back of the model. The tolerance is tight, consequentially a longer M3 screw can be used to drag the nuts in. Once the blink mount is…
Will require supports in certain areas such as the eyes which will be solved in a later updated version. No tolerance adjustment needed, loose fitting, simple to print in any material. Enjoy!
A wall mount for the Blink Mini 2 Camera. Can attach with 3M adhesive sticker or 2 screws of 4mm diameter (I used 4x35mm screws). .stl and .f3d files included
Es müssen für jede Seite je zwei Plättchen ausgedruckt werden und dann gegengleich in die Öffnungen platzieren.
Blink Mini Camera Window Mount that i designed for my need to have a security camera installed on the window looking on the street of the block where i live, as in multiple occasions i've had packages left at the front of the building…
My friend was putting together a Blink ( https://en.wikipedia.org/wiki/Blink\_(comics ) ) cosplay costume for the Dallas Comic Con this year and asked if I could help her come up with some Teleportation Shards. Of course I gave it a shot!…
Habe mal einen Satz Blinkergitter / Blinkergrill gefertigt für den Passat 32b / 33b / Santana Die Datei beinhaltet zwei Gitter, einmal Rechts und einmal Links. Die Schräge Seite soll nach innen zeigen. Zur Befestigung werden die Original…
Blinkerdichtung Yamaha DT175mx und weitere Klassiker
This has been modified to fit the Outdoor Camera 4 mounting hardware.
Need to mount a camera in a location where is was off to the side of the surface I could screw into so I created this variation to my other mounts. I chose to use this style where I can remove the camera & stand quickly, it's a bit bigger…
A fresh recreation of a cover concept also including a stand that locks the camera inside the holder. I wanted a cover to use outside and that could easily be moved and stood on various surfaces without falling over. I have used this to…
Since I had a couple of spare magnets from the Enclosure build, I thought I'd combine it with the Blink Mini-Cam to get real-time video. I don't think it can interface with Prusa Connect, so I just use the Blink App I already have (using…
If you are like me, you like to spy on things, especially Birds! I created this Blink Outdoor4 camera mount for a Whitehorse birdhouse. The birdhouse is decent quality, and available at amazon. (Link Below). Designed in FreeCad, model…
Found a mount for the Ender 3 and modified it to work on my Neptune 4 pro. I have moved the display up to my desk, so this directly replaces the display holder with the same mounting hardware.
