Blink Mini Privacy Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a camera in my home office for keeping an eye on my dog but want it to be closed off when I am home and…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 191
- Wydruki
- 1
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a camera in my home office for keeping an eye on my dog but want it to be closed off when I am home and working. I saw a similar design on Etsy, but there were no print files available, so I made a quick remix in Tinkercad.
This is a remix of https://www.thingiverse.com/thing:5801100 where I removed the partial block and added a print in place lid instead.
The tolerances for the hinge are 0.3mm which is a bit loose on my Prusa, but works as intended. The collar slides on nicely and should be snug enough, to not fall off when operating the lid.
I angled the hinge base to allow a wider opening angle, to have it stay open, when the camera is slightly pointed down.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
any
Filament: any PLA any
Notes:
Print in place without support. Only tested in PLA, other material might have to be scaled because of shrinkage.
Category: Camera