Blink Mini Camera Mount for Flashforge AD5X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A corner bracket to attach Blink Mini camera for viewing prints
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 253
- Wydruki
- 2
- Wyświetlenia
- 2105
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Blink Mini Camera Mount for Flashforge AD5X
This mount is designed to securely hold a Blink Mini camera on a Flashforge AD5X, using three existing screw positions on the printer for a clean, non-invasive installation.
Link to product - https://amzn.to/4sB2oPg
Please note the above camera can be powered from the USB on the side of the screen, which makes it pretty practical if you're low on plug sockets. It can also be ran internally to avoid having the long USB cable on show.
The mount positions the camera to give a clear view of the build area while remaining stable during printing. By reusing factory screw locations, it avoids permanent modifications and keeps the installation simple and reversible—ideal for print monitoring or time-lapse recording.
Consider printing my cable management piece to go with the camera and keep your cable out of sight.
Features
Custom mount for Blink Mini camera
Designed specifically for the Flashforge AD5X
Mounts using 3 existing screw positions (no drilling or modification required)
Stable mounting to minimise vibration and movement
Clear view of the build plate and print area
Compact, functional design with minimal material use
Compatibility
Camera: Blink Mini
Printer: FlashForge AD5X
Screws: I'd recommend not going any longer than 10mm protruding from the mount, otherwise mount thickness will need increasing. If a thicker model is required, leave a comment and additional variations can added.
Not guaranteed to fit other Blink models or Flashforge printers (may fit AD5M as enclosure is similar but unable to verify. If you print it for a AD5M and it fits please let me know in the comments)
Printing Notes
No supports required
Prints well in PLA or PETG (PETG recommended for higher temperature environments)
0.2 mm layer height recommended
2–3 perimeters for strength
A simple and practical solution for adding reliable print monitoring to your FlashForge AD5X using a compact and affordable camera.
Some of the links here are Amazon affiliate links. Using them doesn’t cost you anything extra, but it helps support future projects – thanks!