Blink Mini Pan Tilt Camera Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for the Blink Mini Pan-Tilt Camera.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 437
- Wydruki
- 3
- Wyświetlenia
- 1538
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mount for the Blink Mini Pan-Tilt Camera. This can be mounted to the wall with either Command Strips or screws. Cutouts on the sides and bottom allow for the power cord to be routed in any direction. I added a hole underneath the Pan-Tilt base which can be used to secure the base to the mount with a ¼” screw and washer if desired.
The mount extends far enough from the wall to allow full articulation of the camera during calibration.
Make sure to use Command Strips that are strong enough to hold the weight of the camera + pan-tilt base. I also made a version that can be mounted with screws instead.
Print Settings
Printer: AnkerMake M5
Filament: PLA+
Infill: 15% Gyroid
Supports: No supports required
Layer Height: 0.2mm