Liczymy pasujące modele…
Cute mini Octopus , the ORIGINAL! It's designed so it can be printed at once. No assembly or supports required . Many different STL files, with straight or spiral tentacles, both with and without included support. UPDATE!! v6 fixes some…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena jednego wariantu
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnet Size 6x2mm * for commercial license, Please visit my Patreon
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
This ultra-compact mini whistle is designed for maximum efficiency with minimal material use. Weighing only 0.6g and printing in just 4 minutes , it delivers an impressive 100 dB sound output (measured via smartphone app). Perfect for…
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
This model is compatible with the lego system.
This model is compatible with the lego system.
About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…
This model is compatible with the lego system.
Simple chess pieces. Only the knight really needs supports. Hole in bottom for 5mm diameter magnet which would need to be glued in as designed. Create in Tinkercad.
This is a compact custom filament sensor version of the legendary Sherpa Mini that includes several improvements. Please read the differences section compared to the original Sherpa Mini. This version uses nylon screws and nylon nuts at…
A small and extremely portable Pinecil case that suits my needs. Has space for: 1 Pinecil soldering iron 7 Soldering iron tips 1 Solder spool 1 608 bearing hot iron stand Most heat set insert tips. Iron stand assembly: insert a 608…
Alhoon — Undead Mind Flayer | Free Unsupported STL | D&D 5e Miniature Hey everyone, here's a free Alhoon Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out…
This is a mount I designed to house a replacement speed controller module that I used to replace the OEM control board on my Harbor Freight 7x10" mini lathe. The OEM boards have a tendency to burn out really easily when under load, so…
Liked the design someone else used for a tray, so I cut the X and Y to make it fit the build plate of the A1 mini
Greetings! And yes, I have gone off on a tangent again. This time after picking up a cheap tabletop pool set from the shops on the request of my youngest boy, I thought to myself, "I wonder if I could design a decent printable mini…
Upate 2024-10-13: Replaced stl with 3mf Added an additional V2 with holes for improved gluing Updated images accordingly A minimalist servo frame for the X06H servo from KST. The frame is glued directly into the wing and the servo is then…
Easy to print brackets to mount the Bambu Lab A1 mini build plates under the desk. Each brackets feature two screw holes for 3mm screws. There are two versions available. One holding tree steel sheets and the other holding five steel…
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
I've been needing a compact yet functional garbage can in my 3D printing workspace for some time, so I decided to design and print one! This waste bin is specifically designed to maximize the full print volume of the Bambu Lab A1 Mini,…
Mini Vase "Clay pot style" Collection - Mini Vaso in stile classico terracotta Easy to print, optimized filament usage Resize/Scale to adjust dimension Don't forget to "Click A Like" & check out my other designs
A grumpy gargoyle that prints without supports! https://youtu.be/23MjyorK3xk Printing Can be printed in both FDM and resin No supports required Requires minimal infill All Sculptember Models Ghost Mummy Frankenstein Werewolf Dracula…
Realistic old style boat with paddles - easy to print and assamble. For assemble you need just some glue you are comfortable with. Supports are needed just on flat base ring where floor sits and that's it. You can tweak weight…
Simple gadget to create photobox with usual paper sheets. It's better to print with matte white plastic. After print, clear seams on paper insert gap. Stackable design! If you need bigger photobooth - print several, they can be stacked.…
you can hang it on your coffee plate and put a mini ice cream cone in it
I printed it with the 0.2 mm nozzle, but the 0.4 mm nozzle should also work. Good luck with printing, and don't forget to like if it helped you! Fine high-quality settings recommended
Ever wanted your iPod mini to be USB-C? Fret not! This case lets you do that without modifying the iPod in any way. You just need an old 30 pin cable and a USB-C female port (like this one for example:…
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
A box for Heroforge figurines. If your character is brandishing a sword over their head or riding a mount, they probably won't fit. The inner dimensions are 39mm tall, 25.5mm x 25.5mm UPDATE - 05/02/2020: I've updated the lid so it slides…
Hello! I needed a mini-shelf for my Raspberry PiCam so I tried to design one even though I had never modelled anything (not being an engineer or anything of the sort, I don't have the slightest clue about material strength and such…
I don't like to use glue as the original design intended so I've added holes to secure by screw. I also made its blade holder longer as that's what I have, and a different version that have a bend for wire to exit perpendicular to fuse,…
I wanted a way to get some more interesting shots for my Youtube videos, so I designed this small adjustable dolly for my GoPro. Hardware Required: -2x M4x6 Hex Screw -7x ¼ x 18mm Hex Head Bolt -2x ¼ Nut -4x 608 Bearings Supports only…
Optimize your setup with the HomePod Mini TV/Monitor Mount, a sleek, easy-to-install 3D-printable holder designed to securely attach to the back of your TV or monitor. This mount allows you to keep your Apple HomePod Mini close by without…
My sister asked me to print these corners for her. I looked around and found a model on Thingiverse. That was great, but I had some trouble printing them, so I took that model and made several changes to print it reliably without support.
very swag tiny carnival if you down load you can add ur own motors or whatever you want. You can use it for figure photography.
-New version avaliable- Click here Extruder wheel for bambu A1/A1 mini with 3 patern: wheel_danger_sign wheel_irradiation wheel _recycle/processing Looks very cool! Printed on Bambu lab a1 mini with 0.4 nozzle with default settings on…
A minimalistic towel rack which can be screwed with some counter sunk screws. Screws will be hidden under the cap. Easy to print without any support
Get your [Mini 13](https://www.printables.com/model/422353-mini-13-printable-jointed-figure) Heroes into the action with a proper cape! This project adds a frame piece which fits over the existing Mini 13's neck, and two options for…
I needed a clip for my shed guttering 76mm but shallower, so created this model.
A looping for the custom track. This is not compatible with Tamiya manufactured track. Use the connectors and straight pieces from the original design to make a stable assembly. Printed with a 0,4 mm nozzle and 0,3 mm layer height. Note…
3D Printed minimalist bedside lamp with Ikea with smart bulb
Instructions can be found in the folder of this project (Other Files). Versions of the wallet: mini Wallet - V1.1 sprintech.net Happy printing If you like what I do, you can Buymeacoffee :-)
This is the Assembly tool for squaring the frame during assembly. Some kits were shipped without the laser cut jig. I have included the original STEP file, as well as an STL that has been trimmed to fit a Bambu X1/P1 printer. I printed in…
I wanted some wider feet for the adjustable legs on the DMC Mini Mill. Suggest printing them in TPU (60D) 6 Walls, 4 Top/Bottom Layers 25% (3d honeycomb) infill
This is just a small box that hangs from the aluminium extrusion profile beam of the Prusa Mini, 70mm*70mm*32mm, to store some small stuff (like filament clips in the photo). It was inspired by chris4834's Side-mounted under-bed Storage…
oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
This simple print adds some nature to your indoor settings. I added a number of large hex nuts, taped together and placed them inside the pot for ballast. Then I inserted the cutting and filled the rest of the pot with fine sand to…
I wanted a horizontal mount for the SKR Mini E3 V2 to act as a secondary MCU for Tronxy X5SA Pro build. It needed to be in the front right side so it could be hooked to a display. Printed in PLA using Voron print specifications. Supports…
Rackmount for up to 16 Blackmagic Mini Converters. The set consists of 4 parts that can be screwed together.
I just split the model to make it fit to the printed of the Prusa Mini+ I use it for my 1/24 AX24 crawler. happy drive - printing ;)
Xbox series S minimal slide in wall dock. Designed in a way which use xbox bottom and back rubber pads to eliminate vibrations and add stability. Console can be removed without unscrewing anything and put back in same way. Parts included…
Minimal protective shell for SanDisk Cruzer Ultra with a broken case. First you need https://www.printables.com/model/452052-usb-stick-repair-sandisk-cruzer-ultra by Willi, then just slip the cover on. You can add a dab of glue, but it's…
This headphone stand was designed to be printed in one piece, without support, to be used with larger headphones. I wanted it to be a more minimalist option that would work well in both office and home environments. I have tested this…
As I couldn't find a holder that actually fit my (boss') monitor, I decided to remix one :D
This is a small Standalone Option of the D1 Mini Touch Sensor Module. Print Settings Printer: BiquB1 Rafts: Doesn't Matter **Supports:** No Resolution: 0.2 **Infill:** 25% Filament: Inland PLA Black Category: DIY
Hi all here are all my mods for V-Minion 1.1 ( this is NOT mods from 1.0 to 1.1 ) original files are found here V-Minion 1.1 Alpha - Rat Rig Lab these mods are from the 1.1 since i have had it for a while (helped develop it) i don't have…
The bracket is barely noticeable and allows the projector to be mounted simply by sliding it into place. It is ideal for flexible use in different rooms, such as the home theater or bedroom.
Small box used to put batt. charger electronics MRB045 for DIY installation of Lion bateries in old appliances working on 12V from ordinary USB charger . Same box can be used for same electronic board with other voltages-depends on number…
The Minimal Mainboard Enclosure, when you want *just enough* protection for the mainboard from your Framework 13. Features Include: 2 Framework expansion module mounts. Locking clips included to make sure you don't rip out a port while…
Deutsch: Kleines Gehäuse um ein Shelly mini gen 3 als schaltbare Kabelverlängerung zu nutzen. Vorsicht Hochspannung, 230 V = Lebensgefahr! English: Small case to use a shelly mini gen 3 as a switchable cable extension. Caution, 230 V =…
This model is compatible with the lego system.
I glued a magnet, 6mm wide, 3 mm thick into the bottom part. I slide and glued the Z into the slot of the bottom part. I love to look at Z axis movements during a print ! I have used a standard plastic glue, no cyanocrilate.
This model is compatible with the lego system.
Simple remote caddy, but can be used for anything I opted for fuzzy skin mode for a textured surface
This Christmas tree ornament features a playful, low-poly character design, resembling a Minion in festive attire. I've added 4 parts for color printing but of course you can combine them and print in one color. I printed it laying on the…
Bold lines and sharp edges define this 3D-printed lighter case, inspired by the energy of the techno scene. With a futuristic, industrial feel, this lightweight, fast-to-print case is perfect for those looking to make a statement. This…
Changed the original lid to fit when SD card is inserted.
This my third mini sumo robot attempt. I hope you'll try to create it yourself.
With a new spool of glow in the dark filament in hand I found myself wondering just what I could print. Inspiration struck when looking out my office window at an old rusted lantern hanging on a post. Ah! That was it! A lantern. I set…
Ceci est un mini ventilateur a main Pour le fair il vous faut : Du câble électrique ^ v8h41teh3&refer_page_sn=10032…
a miniature gamer setu with pc,monitor,table,keyboard and mouse,you can put it in your desk for decoration
PRUSA MINI bed plate holder It is designed to hold four plates vertically for Prusa MINI. Another advantage is that it can store plates for A1 mini, which fits Prusa MINI with a slight modification. Unfortunately, I needed to make it for…
I made this character through https://desktophero3d.com/ . I also included the gcode I used for my print of the Triton (Female) (Trident Variant). It includes support blockers, as well as a stop time to change the base color for your…
This is the 45x12 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x23 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
I designed this to mount my Mac Mini under my workbench. The Mac sits securely in place but if you lift the front it can slide in and out. All front and back ports and the power button are accessible. I printed mine in black PETG. I was…
Simple replacement 90mm fan cover for mini pc barebone cases.
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
Just added a DIN Rail mount to the middle part for industrial mounting also made some printability improvements Category: Electronics
Saw alot of wall art, but not a mini.. so i thought why not make one. Free but at least give a like ;)
Durable and easy-to-print sliders designed to fit 30 x 30 mm aluminum extrusions. Perfect for smooth, adjustable movement in DIY projects or custom setups. Print with supports, ensuring a quick and hassle-free build for makers of all…
An empty tube to refill with grease for your 3oz mini grease gun. I printed this because the grease I needed wasnt available in a small tube to fit my harbor freight mini grease gun. I refilled it with the mini grease tube refiller linked…
Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…
This is a minimalistic battery holder that i made. It holds 16 AA battery.
![Cape for Mini 13 [v1]](https://media.printables.com/media/prints/1036338/images/7861287_f72743cc-0116-4f2c-b050-0b8ec484c0f4_b092b92b-ba06-4130-8a6e-b110372474e6/img_6519.jpg)
