Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief.
- Ocena
- 4,967 / 5
- Polubienia
- 287
- Pobrania
- 1179
- Wydruki
- 29
- Wyświetlenia
- 9295
- Oceny
- 30
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle.
Added x axis strain relief to https://www.prusaprinters.org/prints/45962-prusa-mini-raspberry-pi-camera-module-v21-8mp-moun as suggested by Fanous.
UPDATE: Added a version to support cameras the are 4mm thick from to back at the ribbon cable. The original files supported cameras that are 3.6mm. Please measure your camera front to back at the ribbon cable plug to determine what version to use. 4mm version files are appended with 4mm in the file name.
UPDATE (2):
Berntzone has remixed for cameras that have more spacing between the camera and the board than the 4mm version will allow.
https://www.prusaprinters.org/prints/49125-prusa-mini-raspberry-pi-camera-v21-mount-thicc
4mm GCODE found under User Print Files
Original files support 3.6mm camera at ribbon cable.
Files appended with 4mm support cameras that are 4mm at ribbon cable.
Print instructions
This one does require supports.
UPDATE: Added a version to support cameras the are 4mm thick from to back at the ribbon cable. The original files supported cameras that are 3.6mm. Please measure your camera front to back at the ribbon cable plug to determine what version to use. 4mm version files are appended with 4mm in the file name.
Original files support 3.6mm camera at ribbon cable.
Files appended with 4mm support cameras that are 4mm at ribbon cable.
4mm GCODE found under User Print Files