Snowman maker / mold | mini smowman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three part mold for making mini snowmans. Print in place, with supports.
- Ocena
- 4,771 / 5
- Polubienia
- 1021
- Pobrania
- 2458
- Wydruki
- 41
- Wyświetlenia
- 9861
- Oceny
- 35
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
It's a mold for making mini snowmans from snow. The mold is assembled from three parts. Two mold parts and one joint. Print in place version also available (I didn't print this version so if you will try, please let me know in the comments, how it worked). Print in place versions are 0,1 mm or 0,15 mm or 0,2mm gap between joint and mold. Holes are designed as ellipses for better printability.
If you like the model you can consider to buy me a coffee: https://www.buymeacoffee.com/filip_z
How Does It Work?
You just put some snow in one part of the modl and then compress it with the second one. For good results you also need to align both parts of the mold. At the bottom part of the mold is a hole where you can put some snow, after compressing, to make better bottom of the snowman.