FlashForge Adventurer 5m (AD5M) - Blink Mini 1 Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bolt on swivel camera mount for the Blink Mini 1 camera on the AD5M.
- Ocena
- 4,75 / 5
- Polubienia
- 76
- Pobrania
- 383
- Wydruki
- 3
- Wyświetlenia
- 2897
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Welcome, welcome!
Here is a camera mount for the Blink Mini 1 onto our AD5M. I modified a guard plate from the minimal enclosure since it's what's on my printer. If you have no enclosure or have the minimal then this can work for you.
During my testing, I noted there's a bit of slop in the hinge I used. Printing or using a washer helped if the sag is an issue.
I cut a bevel into the camera arm so it can be oriented onto that for layer orientation and easier printing.
I already have Blink in my home, so adding this camera was a nice solution that enabled me to check my prints when out and about.
Enjoy. Any issues please let me know. I am but a humble mechanic, so I have a walnut for a brain.